• KIEE International Transactions on Power Engineering
• /
• v.3A no.3
• /
• pp.168-176
• /
• 2003

The Korea Electric Power Corporation (KEPCO) has installed an 80 MY A Unified Power Flow Controller (UPFC) at its 154㎸ 'Kang-Jin Substation in South Korea. The device, manufactured by Siemens & Hyusung, has been operational since October 2002. The Korea Electric Power Research Institute (KEPRI), a division of KEPCO was tasked to study operational strategies that could be employed for the UPFC and surrounding reactive support devices concerning problems of low voltages and overloads in the Mokpo & Gwangju areas. Particular apprehension surrounded the possibility of delay in the installation of a new 345㎸ transmission line from 2005 to beyond 2010. The studies were to specifically determine whether these problems could be eliminated by application of a UPFC. The analysis included determining the UPFC operating point under various conditions, investigations of the coordination between the UPFC and a HYDC line terminating in this area, and the design of a supplementary damping controller for the UFPC. This paper summarizes the results of those studies, demonstrating the dynamic characteristics of the operation of this UPFC operation in the Korean power system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.1
• /
• pp.47-54
• /
• 2003

New efficiency enhancement techniques have been devised and implemented to InGaP/GaAs HBT MMIC power amplifiers for W-CDMA mobile terminals applications. Two different types of bias current control circuits that select the efficient quiescent currents in accordance with the required output power levels are proposed for overall power efficiency improvement. A dual chain power amplifier with single matching network composed of two different parallel-connected power amplifier is also introduced. With these efficiency enhancement techniques, the implemented MMIC power amplifiers presents power added efficiency (PAE) more than 14.8 % and adjacent channel leakage ratio(ACLR) lower than -39 dBc at 20 dBm output power and PAE more than 39.4% and ACLR lower than -33 dBc at 28 dBm output power. The average power usage efficiency of the power amplifier is improved by a factor of more than 1.415 with the bias current control circuits and even up to a factor of 3 with the dual chain power amplifier.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.648-653
• /
• 1998

The conventional three-phase rectifier with bulky LC output filter has been widely used in the industry because of its distinctive advantages over the active power factor correction rectifier such as simple circuit, high reliability, and low cost. Over than 0.9 power factor can be achieved, which is acceptable in most of industry applications. This rectifier, however, is not easy to use for high power density applications since the LC filter is bulky and heavy. To solve this problem, a new simple rectifier is presented in this paper. By eliminating the bulky LC filter from the conventional diode rectifier without losing most of the advantages of the conventional rectifier, very high power density power conversion with high power factor can be achieved. Operation principle and design considerations are illustrated and verified by Pspice simulation and experimental results from a prototype of 3.3 kW rectifier followed by 100KHz zero voltage switching full bridge PWM converter

• The Korean Journal of Food And Nutrition
• /
• v.28 no.6
• /
• pp.1098-1106
• /
• 2015

This study aimed to investigate antioxidant activities from 11 forest plants, and determine their total phenolics, flavonoids and proantocyanidins contents. In addition, the antioxidant activities were correlated with antioxidant compounds. Among the samples, Cornus officinalis, Castanea crenata, Lindera erythrocarpa, Carpinus laxiflora and Pourthiaea villosa showed significantly higher 2,2-diphenyl-1-picrylhydrazyl (DPPH) ($IC_{50}=21.12{\sim}28.93{\mu}g/mL$) and 2,2'-azino-bis(3-ethylbenzothia zoline-6-sulfonic acid) (ABTS) ($IC_{50}=28.18{\sim}52.55{\mu}g/mL$) radical scavenging ability with reducing power ($IC_{50}=59.91{\sim}93.64{\mu}g/mL$) than other plants; and C. crenata, L. erythrocarpa and Rubus coreanus showed strong nitric oxide (NO) inhibition activity (${\geq}60%$). In addition, L. erythrocarpa, C. laxiflora and P. villosa showed higher oxygen radical absorbance capacity (ORAC) values (${\geq}1,100{\mu}M$ TE/g sample) than other samples. High total phenolic contents were observed in C. crenata (429.11 mg GAE/g), L. erythrocarpa (437.11 mg GAE/g), C. laxiflora (408.67 mg GAE/g) and P. villosa (404.11 mg GAE/g). The DPPH and ABTS radical scavenging activity with reducing power were significantly correlated with total phenolic contents ($R^2=0.71{\sim}0.79$), but total phenolic contents were not correlated with NO inhibition and ORAC ($R^2=0.35{\sim}0.43$). Therefore, these results suggested that C. officinalis, C. crenata, L. erythrocarpa, C. laxiflora and P. villosa are potential natural antioxidative candidate ingredients.

• Korean Journal of Plant Resources
• /
• v.20 no.5
• /
• pp.461-465
• /
• 2007

In this study, changes in the overall antioxidant properties and chemical constituents including total phenolics and vitamin C of R. occidentalis fruit during ripening are studied. The antioxidant activity was measured by the free-radical scavenging activity(DPPH method) and reducing power(potassium ferricyanide method). Although, the weight and diameter of R. occidentalis fruit were increased with the progress of ripening, antioxidant activity and total phenolics were decrease during ripening. The highest free-radical scavenging activity(at $125{\mu}g/m{\ell}$) and reducing power(at $100{\mu}g/m{\ell}$) in fruit were 61.67% and 0.71, respectively. Total phenolic content and vitamin C content in fruit of 5 days after fruit set were $220.73{\mu}g/g$ and $540.45{\mu}g/g$, respectively. A linear correlation(r=0.9761) was shown between free-radical scavenging activity and total phenolic content.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.1145-1153
• /
• 2014

Let G be a finite group and X be a union of conjugacy classes of G. Define C(G,X) to be the graph with vertex set X and $x,y{\in}X$ ($x{\neq}y$) joined by an edge whenever they commute. In the case that X = G, this graph is named commuting graph of G, denoted by ${\Delta}(G)$. The aim of this paper is to study the automorphism group of the commuting graph. It is proved that Aut(${\Delta}(G)$) is abelian if and only if ${\mid}G{\mid}{\leq}2$; ${\mid}Aut({\Delta}(G)){\mid}$ is of prime power if and only if ${\mid}G{\mid}{\leq}2$, and ${\mid}Aut({\Delta}(G)){\mid}$ is square-free if and only if ${\mid}G{\mid}{\leq}3$. Some new graphs that are useful in studying the automorphism group of ${\Delta}(G)$ are presented and their main properties are investigated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2005

The scavenging effects of four extracts on the DPPH radical were increased with increasing amount of extract. However, these effects were not statistically significant. The reducing power of the extracts is increased as the amount of extract is increased. To compare reducing powers of various solvent extracts, 50% ethanol extract showed the highest reducing power. The various solvent extracts were also capable of scavenging nitrite in a manner dependent on concentration. They exhibited scavenging effects 90% on nitrite at the dose 500 p.g of water extract from propolis. The propolis extract significantly inhibited all the microorganisms tested, showing the largest inhibitory zone for Bacillus subtilis and Bacillus cereus. The 70% ethanol extract from propolis exhibited the strongest inhibitory effect on A549. The inhibitory effect of four extracts showed in that order 70% ethanol extract>95% ethanol extract>water extract>50% ethanol extract.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.85-94
• /
• 2011

Expanded graphites were used as anode materials of high power Li-ion secondary battery. The expanded graphite was prepared by mixing the graphite with $HClO_4$ as a intercalation agents and $KMnO_4$ as a oxidizing agents. The physical and electrochemical properties of prepared expanded graphites through the variation of process variables such as contents of intercalation agent and oxidizing agent, and heat treatment temperature were analyzed for determination of optimal conditions as the anode of high power Li-ion secondary battery. After examing the electrochemical properties of expanded graphites at the different preparing conditions, the optimal conditions of expanded graphite were selected as 8 wt.% of oxidizing agent, 400 g of intercalation agent for 20 g of natural graphite, and heat treatment at $1000^{\circ}C$. The sample showed the improved charge/discharge characteristics such as 432 mAh/g of initial reversible capacity, 88% of discharge rate capability at 10 C-rate, and 24 mAh/g of charge capacity at 10 C-rate. However, the expanded graphite had the problems of potential plateaus like natural graphite and lower initial efficiency than the natural graphite.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.235-240
• /
• 2000

Screen-printing and doctor blade method were investigated and proposed as an electrode coating process for high power capacitor. CV measured from the amorphous $MnO_2$ electrode prepared by screen-printing shows closer to ideal capacitor characteristics. Specific capacitances calculated from CVs with potential scan rate of 50mV/s were 5.8, 81.8, and 172.0 F/g for electrode thickness of $140{\mu}m,\;24{\mu}m,\; 3{\mu}m$, respectively. Assumed that utilization of active $MnO_2$ in electrode of screen-printing is $100\%$, those were $3.4\%$ in one of paste method and $47.6\%$ in one of doctor blade method. The screen-printing can be good technique to coat thin film on current collector for high power application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1381-1389
• /
• 2010

The smart grid technology is expected to significantly improve energy efficiency by dynamic power supply. One of its application is the Vehicle-to-Grid(V2G) that utilizes an electric vehicle's battery as a household storage battery. Meanwhile, a lot of researches are recently investigated in the area of wireless energy transfer technology because of its convenience and safety in charging a battery. With the wireless energy transfer infrastructure a wireless magnetic induction communication technique can help the dynamic power supply of the smart grid more efficient. In this paper, we propose a wireless magnetic induction communication sion cowhich includes data transmission and location-aware functions. We expect the sion cohelp the smart grid to control power supply more efficiently. We also developed its test-bed and evaluated the performance.