• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.458-467
• /
• 2014

In this paper, a single-phase current-source bidirectional converter topology for V2G applications is proposed. The proposed converter consists of a single-phase current-source rectifier (SCSR) and an auxiliary switching network (ASN). It offers bidirectional power flow between the battery and the grid in the buck or boost mode and expands the output voltage range, so that it can be compatible with different voltage levels. The topology structure and operating principles of the proposed converter are analyzed in detail. An indirect control algorithm is used to realize the charging and discharging of the battery. Finally, the semiconductor losses and system efficiency are analyzed. Simulation and experimental results demonstrate the validity and effectiveness of the proposed topology.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.67-68
• /
• 2007

The introduction of high brightness LEDs with white light and monochromatic colors have led to a movement towards specialty and general illumination applications. Because drive circuit of illumination LED has an effect on efficiency and life, research about the drive circuit following LED characteristic is needed. This paper proposed a implementation of the stand-alone LED lighting system using battery from photovoltaic power generation.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1102-1104
• /
• 2003

The human beings have increased concern about energy saving and alternative energy. The Power demand has increased the growth of industry and the improvement of lift. We have to explore alternate energy sources and utilize effectively domestic resources. The lighting equipments developed energy saving by using an electric ballast. The load installation should be promoted to rational power management according to the network, intelligent and high-function. Therefore, this paper has studied the method of energy saving and consulting.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1298-1298
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 한국원자력학회 2001년도 추계학술발표회요약집
• /
• pp.203.1-203
• /
• 2001

• Korean Journal of Food Science and Technology
• /
• 제22권4호
• /
• pp.461-465
• /
• 1990

Fermented soybean sauce was fractionated by gel filteration chromatography and the physico-chemical properties of each fraction were investigated for the study on the separation and characteristics of antioxidative substances in the soybean sauce. The brown coloured melanoidin fractions(MF-I) collected by Sephadex G-10 column were found to contain nitrogeneous compounds and to have strong antioxidative activity and reducing power. The freeze dried MF-I was further fractionated with Sephadex G-50 and G-100 successively and then MF-II and MF-III fractions were observed to be the most effective antioxidant and reducing power among the fractions. The UV-VIS and IR absorption spectra of the each fraction were also determined and discussed.

• Journal of the Korean Applied Science and Technology
• /
• 제22권1호
• /
• pp.15-20
• /
• 2005

$Na_2CO_3$. Sodium orthosilicate (Na-OSi), Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate (303C), Newpol PE-68 (PE-68), MJU-100A, and tetrasodium pyrophosphate were blended to prepare high performance alkaline cleaning agents (ACASs). The results of cleaning test with steel specimen showed that ACAS-6 ($Na_2CO_3$ 50g/Na-OSi 35g/T-701 20g/303C 18g/PE-68 17g/MJU-100A 10g/TSPP 20g/ water 180g mixture) had a good cleaning power. The cleaning power for press-rust preventing oil was 98% and 99% degreasing at 4wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively ; for quenching oil, the cleaning power of ACAS-6 was 91% degreasing at 4wt% and $70^{\circ}C$. The foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt%, $60^{\circ}C$ were 18mm and 65mm, respectively. It was concluded that ACAS-6 had a good low foaming cleaning agent.

• Journal of Radiation Industry
• /
• 제18권2호
• /
• pp.117-126
• /
• 2024

This study aims to identify high exposure tasks among the tasks performed in domestic nuclear power plants as a basis for developing training programs to improve the efficiency of workers' work. To this end, we first analyzed the exposure status of radiation work in domestic nuclear power plants. Radiation tasks in nuclear power plants were categorized, collective doses were investigated, and the collective doses were calculated based on the collective doses, and representative high exposure tasks were identified. We found that the collective and individual doses in domestic nuclear power plants are continuously decreasing, but there is an imbalance of exposure among workers. In terms of work classification, nuclear power plants are managed in 236 work codes based on light water reactors and 181 work codes based on heavy water reactors, depending on the work equipment and location. Among the total work codes, 23 codes have an annual average dose exceeding 10 μSv, and based on this, 10 representative high exposure tasks were derived. The representative high exposure tasks were selected as S/G nozzle dam work, S/G debris removal work, nuclear instrumentation system, S/G eddy current detection work, and insulation work. The results of this study are expected to serve as an important basis for reducing the exposure of workers in nuclear power plants and improving work efficiency.

• Rubber Technology
• /
• 제6권2호
• /
• pp.91-98
• /
• 2005

Nano-sized cathode materials for high power lithium ion polymer battery are easily and economically prepared using united eutectic self-mixing method without any artificial mixing procedures of reactants and ultra-miniaturization of products. While the micro-sized $LiNi_{0.7}Co_{0.3}O_2$ exhibits the discharge capacities of 167.8 mAh/g at 0.1C and 142.5 mAh/g at 3.0C, those of the nano-sized $LiNi_{0.7}Co_{0.3}O_2$ are 170.8 mAh/g at 0.1C and 159.3 mAh/g at 3.0C. In the case of $LiCoO_2$, the micro-sized $LiCoO_2$ exhibits the discharge capacities of 134.8 mAh/g at 0.1C and 118.6 mAh/g at 5.0C. Differently, the nano-sized $LiCoO_2$ exhibits the discharge capacities of 137.2 mAh/g at 0.1C and 131.7 mAh/g at 5.0C.

• Journal of Power System Engineering
• /
• 제3권1호
• /
• pp.55-59
• /
• 1999

Generally, T.G(Tacho-generator, Tachometer) sensor is used widely for sensing the angular velocity in rotary machine. By limitation of T.G sensor's structure, the sensed angular velocity include a periodic noise, and the noise is called "ripple" as an electrical term. To reduce the effecting of the ripple, many kinds of filters are designed and installed, but there is necessary a trade off between response time and adapted frequency band. In this paper, we propose a generalized observer to estimate an angular velocity from the output signal of T.G sensor. The generalized observer is proposed firstly for continue systems, and it is applied to DC servo motor with T.G sensor. For simulation, we measure T.G signals at 60, 400, 570 rpm respectively, and analysis those to obtain the resonance frequency of ripple by FFT method. To verify the effectiveness of the proposed algorithm, we compare the results with those of a RC low frequency band filter.