• Tunnel and Underground Space
• /
• v.33 no.3
• /
• pp.189-207
• /
• 2023

In the present study, the thermoshearing experiment on a rough rock fracture were modeled using a three-dimensional grain-based distinct element model (GBDEM). The experiment was conducted by the Korea Institute of Construction Technology to investigate the progressive shear failure of fracture under the influence of thermal stress in a critical stress state. The numerical model employs an assembly of multiple polyhedral grains and their interfaces to represent the rock sample, and calculates the coupled thermo-mechanical behavior of the grains (blocks) and the interfaces (contacts) using 3DEC, a DEM code. The primary focus was on simulating the temperature evolution, generation of thermal stress, and shear and normal displacements of the fracture. Two fracture models, namely the mated fracture model and the unmated fracture model, were constructed based on the degree of surface matedness, and their respective behaviors were compared and analyzed. By leveraging the advantage of the DEM, the contact area between the fracture surfaces was continuously monitored during the simulation, enabling an examination of its influence on shear behavior. The numerical results demonstrated distinct differences depending on the degree of the surface matedness at the initial stage. In the mated fracture model, where the surfaces were in almost full contact, the characteristic stages of peak stress and residual stress commonly observed in shear behavior of natural rock joints were reasonably replicated, despite exhibiting discrepancies with the experimental results. The analysis of contact area variation over time confirmed that our numerical model effectively simulated the abrupt normal dilation and shear slip, stress softening phenomenon, and transition to the residual state that occur during the peak stress stage. The unmated fracture model, which closely resembled the experimental specimen, showed qualitative agreement with the experimental observations, including heat transfer characteristics, the progressive shear failure process induced by heating, and the increase in thermal stress. However, there were some mismatches between the numerical and experimental results regarding the onset of fracture slip and the magnitudes of fracture stress and displacement. This research was conducted as part of DECOVALEX-2023 Task G, and we expect the numerical model to be enhanced through continued collaboration with other research teams and validated in further studies.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.312-323
• /
• 2023

Background: Environmental concentrations of substances can be estimated by K-CHESAR based on main, industrial, and use categories (MC/IC/UC) and ECETOC TRA based on environmental or specific environmental categories (ERC or spERC). Objectives: Three different systems for estimating environmental concentrations were compared to figure out their order with possible reasons along with relationship of regional predicted environmental concentrations (PEC_regional) and final PEC_local for various uses of a substance. Methods: Typical uses of the case substance and their corresponding ERCs were selected from the webpage of the European Chemical Agency. Proper MC/IC/UC and spERC were assigned to each ERC. Emission fractions were compared for each assessment code from the available database. PECs were calculated by three estimating systems: K-CHESAR using MC/IC/UC, ECETOC TRA using ERC, and ECETOC TRA using spERC with their default values for input parameters. Percentage of PEC_regional to PEC_local were manually calculated for each use. Results: Emission factors decreased in the order of ERC > MC/IC/UC > spERC. Values of the final PEC_local derived as sum of PEC_regional and Clocal decreased in the order of calculations using ECETOC TRA-ERC>KCHESAR with MC/IC/UC>ECETOC TRA-spERC for all environmental media. Percentages of PEC_{regional,water} to PEC_local,water ranged from 0 to 10.3% in industrial uses calculated with MC/IC/UC and ERC but 96.3 to 100% in wide dispersive uses of ERC and spERC where values of C_local,water are estimated to be very low. Conclusions: ECETOC TRA generated the most refined PNEC values with spERC and the least with ERC, while K-CHESAR with MC/IC/UC generated values between the two results. The ratio of PEC_regional to PEC_local can be a good measure for performing suitable estimation of PNECs according to use.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1945-1954
• /
• 2020

Subchannel code is one of the effective simulation tools for thermal-hydraulic analysis in nuclear reactor core. In order to reduce the computational cost and improve the calculation efficiency, empirical correlation of turbulent mixing coefficient is employed to calculate the lateral mixing velocity between adjacent subchannels. However, correlations utilized currently are often fitted from data achieved in central channel of fuel assembly, which would simply neglect the wall effects. In this paper, the CFD approach based on spectral element method is employed to predict turbulent mixing phenomena through gaps in 3 × 3 bare tight lattice rod bundle and investigate the flow pulsation through gaps in different positions. Re = 5000,10000,20500 and P/D = 1.03 and 1.06 have been covered in the simulation cases. With a well verified mesh, lateral velocities at gap center between corner channel and wall channel (W-Co), wall channel and wall channel (W-W), wall channel and center channel (W-C) as well as center channel and center channel (C-C) are collected and compared with each other. The obvious turbulent mixing distributions are presented in the different channels of rod bundle. The peak frequency values at W-Co channel could have about 40%-50% reduction comparing with the C-C channel value and the turbulent mixing coefficient β could decrease around 25%. corrections for β should be performed in subchannel code at wall channel and corner channel for a reasonable prediction result. A preliminary analysis on fluctuation at channel gap has also performed. Eddy cascade should be considered carefully in detailed analysis for fluctuating in rod bundle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3442-3447
• /
• 2014

A simple method to evaluate the hygroscopic characteristics of polymer of microelectronic plastic package is suggested. To evaluate the characteristics, specimens were prepared, and the internally absorbed moisture masses were measured as a function of the absorbing time and calculated numerically. The hygroscopic pressure ratio was calculated by heat transfer analysis supported by commercial FEM code because the hygroscopic diffusion equation has the same form as the heat transfer equation. The moisture masses were then summed by the self developed code. The nonconductive polymers had quite different characteristics for the different lots, even though they were the same products. The absorbed moisture mass variations were calculated for several different characteristics, and the optimal curve of the mass variation close to experimental data was selected, whose solubility and diffusivity were affected by the hygroscopic characteristics of the material. The method can be useful in the industrial fields to quickly characterize the polymer material of the semiconductor package because the fast correspondence is normally required in industry. The weight changes in the aluminum-nonconductive-polymer joint due to moisture absorption were measured. The deformed system was also measured using the Moire Interferometry system and compared with the results of finite element analysis.

• Journal of the Korean Society for Library and Information Science
• /
• v.41 no.2
• /
• pp.161-180
• /
• 2007

The goal of this study is to examine what sort of books people read repeatedly, what are the different preferences between men and women, how much the repeatedly-read books are related to the most memorable books and how the repeatedly-read books are connected to reading habits. A questionnaire was provided to college students and their repeated reading experiences were searched. The results of the statistical analysis are summarized : 1) Most college students have experienced repeated reading more than twice. 2) The number of college students who have experienced repeated reading twice is the highest and next, those who have read repeatedly 3 times. Also, the number of times of repeated reading tends to be similar between male and female students. 3) The books which many students read repeatedly more than twice are : a) Romance of 3 Kingdoms b) Little Prince c) Da Vinci Code d) Alchemist e) Chinese nine spine stickle back f) Meu Pe do Larania Lima g) Harry potter. 4) About half of the students have read the most memorable books many times. 5) The importance of books was evaluated on the basis of the number of repeated readers and the number of readings. The order of the important books is Three Romans of 3 kingdoms, Little Prince, Da Vinci Code, Meu Pe do Larania Lima, Tuesdays with Mollie, Harry Potter, and The Myth of Greece and Rome. 6) The preferred books by male college students are mostly the stories of fighters while female likes books that contain deep emotion and morality. More than half of the males' repeated reading was Romance of 3 Kingdoms while the preferred books of females are distributed widely.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.5
• /
• pp.47-56
• /
• 2008

This study was performed to evaluate the effect of Response modification factors (R-factor) in 3-, 9- and 20- story steel Moment Resisting Frame (MRF) buildings. Each structure was designed using a R-factor of 8, as tabulated in the 2000 International Building Code provision (IBC 2000) and Korea Building Code (KBC) 2008. In order to evaluate the maximum and minimum performance expected for such structures, an upper bound and lower bound design were adopted for each model. Next, each analytical model was designed using different R-factors (8, 9, 10, 11, 12) and four different structural periods with the original fundamental period. For a detailed case study, a total of 150 analytical models were subjected to 20 ground motions representing a hazard level with a 2% probability of being exceeded in 50 years. In order to evaluate the performance of the structures, static push-over and non-linear time history analysis (NTHA) were performed, and displacement ductility demand was investigated to consider the ductility capacity of the structures. The results show that the dynamic behaviors for the 3- and 9-story buildings are relatively stable and conservative, while the 20-story buildings show a large displacement ductility demand due to dynamic instability factors. (e.g. P-delta effect and high mode effect)

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.266-271
• /
• 2018

The Ministry of Food and Drug Safety (MFDS) is amending its test methods for health-functional foods (dietary food supplements) to establish regulatory standards and specifications in Korea. In this regard, we continue our research on developing analytical methods for the items. Octacosanol is the major component of polycosanol and is a high-molecular-mass primary fatty alcohol, obtained from sugar cane wax. Previous researchers have shown that octacosanol can lower cholesterol and has antiaggregatory properties, cytoprotective uses, and ergogenic properties for human health. Recently, octacosanol products have been actively introduced into the domestic market because of their functional biological activity. We have developed a sensitive and selective test method for octacosanol that the TMS derivatives by means of gas-chromatographic-tandem mass spectrometry (GC-MS). The trimethylsilyl ether derivative of the target analyte showed excellent chromatographic properties. The procedure was validated in the range of $12.5{\sim}200{\mu}g/L$. Standard calibration curves presented linearity with the correlation coefficient ($r^2$) > 0.999, and the limits of detection (LOD) and limits of quantitation (LOQ) were $4.5{\mu}g/L$ and $13.8{\mu}g/L$, respectively. The high recoveries (92.5 to 108.8%) and precision (1.8 to 2.4%) obtained are in accordance with the established validation criteria. Our research can provide scientific evidence to amend the octacosanol test method for the Health-Functional Food Code.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.39-44
• /
• 2011

This study was carried out to examine microbiological contamination of ready-to-eat products and to propose a draft-standard and specifications according to food types. RTE foods were classified into 6 groups including fish products, meat products, breads, rices, salads, and fresh cut foods. The prevalence rates of pathogens detected from all samples were compared among food categories. The pH ranges for all RTE samples were between 3.8 and 7.3. Total aerobic cell counts ranged from 2 to 6 log CFU/g. Bread, rice and fresh-cut foods showed significantly higher counts, which ranged above 4.0 log CFU/g among the samples. Two kinds of rice were above the level of the KFDA Food Code standard for Eschrichia coli. The prevalence rate of E. coli in the rice was 6.7%. For Staphylococcus aureus, one fish product and one bread-product had levels above 2 log CFU/g. Bacillus cereus counts for all samples were below the level of 3 log CFU/g. Listeria monocytogenes was not detected in the samples. Therefore, these data suggest that the primary microbial hazard factors for ready-to-eat foods and risk assessments should focus on E. coli, S. aureus, and B. cereus.

• Journal of Food Hygiene and Safety
• /
• v.25 no.1
• /
• pp.24-29
• /
• 2010

This study was conducted to estimate the contents of heavy metals including lead, cadmium, arsenic and total mercury in alcoholic beverages in Korea. Concentration of Hg was analyzed by gold amalgamation method, using mercury analyzer, while concentration of Pb, Cd and As was analyzed by ICP-MS. Concentration (${\mu}g/kg$) of heavy metal in fermented liquors were; for Pb $9.9\;{\pm}\;8.4$(0~38.0), Cd $5.8\;{\pm}\;4.9$(0~5.4), As $28.6\;{\pm}\;19.4$(1~96.4), Hg $0.7\;{\pm}\;1.2$(0~10.6). Concentration (${\mu}g/kg$) of distilled liquors were ; for Pb $4.4\;{\pm}\;5.7$(0~29.3), Cd $2.0\;{\pm}\;2.5$(0~10.3), As $12.0\;{\pm}\;17.0$(0~95.6), Hg $0.2\;{\pm}\;0.3$(0~2.3). Concentration(${\mu}g/kg$ of other liquous were ; for Pb $7.5\;{\pm}\;5.1$(0~13.7), Cd $5.8\;{\pm}\;3.9$(0.6~11.2), As $25.2\;{\pm}\;39.0$(0.5~103.3), Hg $0.3\;{\pm}\;0.1$(0.1~0.5). The present study showed that difference of the amount of constituent in a same category of food are not affect to the content of heavy metals among them. The residual levels of takju, yakju, sake, beer, fruit wine, soju, whiskey, brandy, general distilled liquor, liquor, other liquors are within the maximum levels, prescribed by Korea food code. It is given that heavy metal exposure of Pb, Cd, As, Hg from consumption of alcoholic beverages (takju, yakju, sake, beer, fruit wine, soju, whiskey, brandy, general distilled liquor, liquor, other liquors) are less than 0.03%, 0.06%, 0.01%, 0.01% (mean) in provisional tolerable weekly intake (PTWI) respectively, indicated by FAO/WHO.

• Parasites, Hosts and Diseases
• /
• v.29 no.3
• /
• pp.245-258
• /
• 1991

In order to determine the antigenic localization in the tissues of the adult Metagonimus yokegawai, immunogoldlabeling method was applied using serum immunoglobulins (IgG) of cats which were infected with isolated metacercariae from Plecoglossus altivelis. The sectioned worm tissue was embedded in Lowicryl HM 20 medium and stained with infected serum IgG and protein A gold complex (particle size: 12 nm) , It was observed by electron microscopy at each tissue of the worm. The gold particles were observed on the tegumental syncytium as well as cytoplasm of tegumental cells and epithelial lamella of the caecum. The gold particles were not observed on the basal lamina of the tegument, interstitial matrix of the parenchyma, the muscle tissue and mitochondria of the tegument. The gold particles were specifically labeled in the secretory granules in the vitelline cells. They were also labeled on the lumen of bladder and egg shell. The above findings showed that antigenic materials in the tissue of adult worms were specifically concentrated on the tegumental syncytium as well as cytoplasm of tegumental cells and epithelial lamella of the caecum.