• Journal of Semiconductor Engineering
• /
• 제1권2호
• /
• pp.74-80
• /
• 2020

Due to its superior error correcting performance with affordable hardware complexity, the Polar code becomes one of the most important error correction codes (ECCs) and now intensively examined to check its applicability in various fields. However, Successive Cancellation (SC) decoding that brings the advanced Successive Cancellation List (SCL) decoding suffers from the long latency due to the nature of serial processing limiting the practical implementation. To mitigate this problem, many decoding architectures, mainly divided into pruning and parallel decoding, are presented in previous manuscripts. In this paper, we compare the recent SC decoding architectures and analyze them using a tree structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.337-340
• /
• 2006

The purpose of this study is to propose the stiffness reduction factor for flat plate slabs under lateral loads. Current design code (e.g., ACI 318-05) requires considering the effects of cracks for calculating slab stiffness under lateral loads. This study collected the test results of 20 interior slab-column connections, from which stiffness reduction in each test was estimated with respect to the ratio of applied moment to cracking moment ($M_a/M_{cr}$). Based on collected data, this study proposed equations for calculating stiffness reduction with respect to $M_a/M_{cr}$. To verify the proposed equations, this study conducted the experimental test of interior slab-column connections under quasi-static cyclic loading. From the test, load-deformation curve is compared to that obtained from effective beam width method with the proposed equation for the stiffness reduction. It is shown that the effective beam width method with the proposed equation for stiffness reduction predicts accurately the test results.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.200-207
• /
• 1999

An efficient inverse design technique based on the MGM (Modified Garabedian-McFadden) method has been developed. The 2-D Navier-Stokes equations are solved for obtaining the surface pressure distributions and coupled with the MGM method to perform the inverse design. The solver is parallelized by using the domain decomposition method and the standard MPI library for communications between the processors. The MGM method is a residual-correction technique, in which the residuals are the difference between the desired and the computed pressure distribution. The developed code was applied to several airfoil shapes and the axial blade. It has been found that they are well converged to their target pressure distribution.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.7-13
• /
• 2008

The cavitating flow simulation is of practical importance for many engineering systems, such as pump, turbine, nozzle, Infector, etc. In the present work, a solver for two-phase flows has been developed and applied to simulate the cavitating flows past hydrofoils. The governing equation is the two-phase Navier-Stokes equation, comprised of the continuity equation of liquid and vapor phase. The momentum and energy equation is in the mixture phase. The solver employs an implicit, dual time, preconditioned algorithm using finite difference scheme in curvilinear coordinates. An experimental data and other numerical data were compared with the present results to validate the present solver. It is concluded that the present numerical code has successfully accounted for two-phase Navier-Stokes model of cavitation flow.

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.29-35
• /
• 2005

This paper deals with the problem of multiuser detection over a direct-sequence code-division multiple access (DS-CDMA) channel with incomplete channel state informations (I-CSI). We devise and assess two novel recursive detectors based on the expectation conditional maximization (ECM) algorithm and the generalized likelihood ratio (GLR) principle, respectively. Both receivers entail an affordable computational complexity. Moreover, the performance assessment, conducted via Monte Carlo techniques, shows that they achieve satisfactory performance levels and outperform linear detectors.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 추계학술발표대회
• /
• pp.725-728
• /
• 2006

현대 사회의 자동인식의 기술은 매우 발전해 있음에도 보건의료와 관련한 자동인식 기술의 접목은 아직까지 다른 산업기술 전반에 미치지 못하고 있는 실정이다. 특히 보건의료분야 연구에 기반요소로 사용되는 생물자원은 정확성에 대한 중요도가 매우 높음에도 적합한 코드체계와 자동인식기술 연구가 미비한 실정이다. 생물자원의 신뢰성과 정확성은 국제적인 유통물류 바코드 표준인 GS1-128을 적용 확장하여 바코드체계를 설계하고 자동인식기술을 연계하여 발전된 정보환경을 만들 수 있다. 본 연구에서는 생물자원 자동인식 기반을 제공하기 위하여 필요한 바코드 요구사항을 정의하고 GS1-128을 기반으로한 생물자원 바코드체계를 제시하였으며, 동일한 바코드문자의 표현영역에 보다 많은 정보를 기록하면서도 작은 면적에 표현 가능한 바코드체계를 설계한 것이다.

• 연구논문집
• /
• 통권22호
• /
• pp.47-54
• /
• 1992

A problem of relevant interest to some industries is that of optimum two-dimensional layout. The objective of this work is to allocate the shapes on a sheet in such a way to minimize the amount of waste. A nesting software has been developed to help user arrange the 2D parts effectively. It provides various functions, e.g., transformation, distance-check, NC post-processor, etc. This software is developed in X window system with C langusge. Final goal of this software is generating NC code data of the 2D parts on the sheet that can be directly used in NC machines.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.305-309
• /
• 2005

A computer code was developed to simulate all three stages of the injection molding process ? filling, packing and cooling by finite element method. The constitutive equation used here was compressible Leonov model. The PVT relationship was assumed to follow the Tait equation. The flow-induced birefringence was related to the calculated flow stresses through the linear stress-optical law. Based on the simulation, the Taguchi method was used to investigate the influences of injection molding conditions on the birefringence of a center gate disk. In addition, the optimal processing conditions were selected to minimize the birefringence and the birefringence difference along the positions of the disk.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.143-148
• /
• 1999

G code has to be made after changing the drawing information to DXF file, the converting file. When the information is changed, the converted file had the unnecessary time of rapid feed during working and the large DATA capacity. It need for arranging the information ordered irregularly. This CAM program based AutoCAD can be decreased uncomfortableness in contrast to use of each system. Also it can be increased productivity by arranging information. And it can be used easily for the beginner of the minor enterprises. its program can be decreased system error between others by using one system and increased work efficiency by using DCL.

• Bulletin of the Korean Chemical Society
• /
• 제15권11호
• /
• pp.953-957
• /
• 1994

Pseudospectral Hartree-Fock(PSHF) gradient calculations with $6-31G^{**}$ basis set have been carried out to determine the structure of D-Asparagine molecule $(C_4N_2O_3H_8)$ with improved grids and with the BFGS method. The modified PSHF method, despite partial optimization of the gradient code, turned out to be still faster than the conventional ab initio method, GAUSSIAN 90 program by more than twice. The optimum geometry of D-Asparagine obtained by the PSHF method is in good agreement with those calculated by the GAUSSIAN 90 program (within 0.0036 ${\AA}$ for bond lengths, 0.8 degrees for bond angles, and 1.6 degrees for torsional angles) except for three torsional angles. Here, rather large discrepancy of these three torsional angles (5-6 degrees) is attributed to the small differences in the optimum bond lengths and angles between the PSHF and GAUSSIAN 90 calculations.