• 한국정보처리학회논문지
• /
• 제4권10호
• /
• pp.2485-2492
• /
• 1997

오늘날 자동차의 급격한 증가에 따른 교통 체증을 완화시키기 위해 효율적인 교차로 신호 제어기의 필요성이 대두되고 있다. 최근에는 신호등의 주기를 적응적으로 제어하기 위하여 퍼지 논리가 도입되었다. 일반적인 퍼지 제어 방식은 녹색신호에 교차로로 진입하는 차량 수와 적색신호 동안 대기하는 차량 수를 퍼지 제어의 입력 변수로 사용하여 확장시간을 조정한다. 그러나 이 방법은 가변 교통량을 갖는 교차로에는 부적합하다. 본 논문에서는 대칭적인 소속함수를 갖는 기존의 퍼지 논리 제어기들보다 적은 수의 제어규칙들을 가지면서도 교통 흐름을 보다 잘 반영하는 비대칭적인 소속함수를 갖는 새로운 퍼지 논리 제어기를 제안한다. 제안된 방법의 효율성은 단일 교차로 시뮬레이션을 통해 테스트되었다. 실험결과는 제안된 방법이 평균 지체시간, 통과 대수, 포화도면에서 우수한 성능을 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1228-1230
• /
• 1992

The permanent magnet synchronous motor(PMSM) is receiving Increased attention for servo drive applications in recent years because of its high torque to inertia ratio, superior power density and high efficiency. By vector-controll method, PMSM has the same operating characterics as seperately excited dc motor. The drive system of servo motor is requested to have an accurate response for the reference input and a quick recovery for the disturbance such as load torque. However, when the unknown disturbances and parameter variations are imposed on the permanent magnet synchronous motor(PMSM), the drive system is significantly effected by them. As a result, the drive system with both a fast compensation and a robustness to a parameter variations is requested. This paper investigates the possibility of applying the fuzzy logic controller(FLC) using Multi-Rule Base In a servo motor control system. In this paper, The five Rule Bases(1 to 5) are selected to recover the state error caused by the disturbance in steady state. In the initial operating mode. Rule Base 0 is used. To show the validity of the proposed fuzzy logic controll system, the computer simulation results are provided.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2099-2101
• /
• 2001

In general, the thermal control system has nonlinearity and the time delay, futhermore, it is difficult to design the free size controller, because the external environmental disturbances, such as rapid temperature change. Many researchers in this field are preferring to adapt the fuzzy logic control methods. But it is noted that the actuator identification of M.F.'s used in FLC is very difficult. Therefore in this paper, an implementation technique of thermal control system using RVEGA based optimal fuzzy control was proposed. It's superiority and exaction in controller design processes hardware in implementation were proved through a series of simulations and experimentations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2389-2413
• /
• 2015

High data rates in long-term evolution (LTE) networks can affect the mobility of networks and their performance. The speed and motion of user equipment (UE) can compromise seamless connectivity. However, a proper handover (HO) decision can maintain quality of service (QoS) and increase system throughput. While this may lead to an increase in complexity and operational costs, self-optimization can enhance network performance by improving resource utilization and user experience and by reducing operational and capital expenditure. In this study, we propose the self-optimization of HO parameters based on fuzzy logic control (FLC) and multiple preparation (MP), which we name FuzAMP. Fuzzy logic control can be used to control self-optimized HO parameters, such as the HO margin and time-to-trigger (TTT) based on multiple criteria, viz HO ping pong (HOPP), HO failure (HOF) and UE speeds. A MP approach is adopted to overcome the hard HO (HHO) drawbacks, such as the large delay and unreliable procedures caused by the break-before-make process. The results of this study show that the proposed method significantly reduces HOF, HOPP, and packet loss ratio (PLR) at various UE speeds compared to the HHO and the enhanced weighted performance HO parameter optimization (EWPHPO) algorithms.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.187-192
• /
• 2004

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules. The proposed SOFC scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Performance of the SOFC is illustrated by simulation and experimental results for robot with eight joints.

• 조명전기설비학회논문지
• /
• 제17권2호
• /
• pp.49-57
• /
• 2003

천정크레인 설비의 자동화에 사용될 수 있는 반진동 제어알고리즘을 제안하였다. 제안하는 제어알고리즘은 1) 복잡한 비선형계통 제어에 유용한 것으로 알려진 보상 FLC를 갖는 FCL, 2) 화물의 진동을 적게 하도록 가속도, 속도, 위치 기준 궤적을 발생하는 기준패턴발생기, 3) 속도, 위치 오차를 궤환하는 가속도 궤환제어기로 구성된다. 특히, 제안한 알고리즘은 화물의 진동각 정보를 제어에 활용하지 않으므로 고가의 진동각 센서가 필요 없다는 특징을 갖는다. 시뮬레이션에 의한 연구와 모형 크레인에 대한 실험 연구에 의해 제안하는 알고리즘의 유용성을 보인다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.201-206
• /
• 2003

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed fir a hierarchical control structure consisting of basic level and high level that modify control rules. The proposed SOFC scheme is simple in structure, fast in computation and suitable for implementation of real-time control. Performance of the SOFC is illustrated by simulation and experimental results for robot with eight joints.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.460-463
• /
• 2000

Fuzzy logic control(FLC) has been studied extensively and has been applied in various applications. The most popular control strategy takes the Fuzzy Proportional-Integral(FPI) form while systematic methods have been developed to derive the fuzzy rules and membership functions the choice of the scaling factors remains an open problem, In this paper an analytical FPI scaling factor determining method is derived based on the functional equivalence of the PI and FPI controllers. Simulation have been carried out with a brushless DC motor drive system as test-bed the obtained results drive system as test-bed the obtained results have verified that the derived method is applicable to both the initial choice and further tuning of the FPI scaling factors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.176.1-176
• /
• 2001

Conventional researches almost have been focused on the one dimensional inverted pendulum. Recently, Sprenger et al[2] have researched a two dimensional inverted pendulum Observing human's action to control an inverted pendulum, one can recognize that human uses a three dimensional metier including the up and down motion. In this paper, we propose a fuzzy logic controller(FLC) of a new three dimensional inverted pendulum system. We derive a dynamic equation of the mechanism including a 3-axis cartesian robot and a inverted pendulum. We propose a design method of a fuzzy controller of the yaw and pitch angles of a inverted pendulum. In the design, the redundant degree-of-freedom(DOF) of the robot ...

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.102-107
• /
• 2000

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In tile synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules.