• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2492-2494
• /
• 2000

Design of Fuzzy cotroller consists of intuition of human expert, and any other information about how to control system. If the rules adequately control the system, the design work is done well. If the rules are inadequate, the designer must modify the rules. Through this procedure, the system can be controlled. In this paper, we designed simply a fuzzy controller based on human knowledge, but it has errors showing some vibrations. So we updated the optimal parameters of fuzzy controller using Neural Network algorithm.

• 한국지능시스템학회논문지
• /
• 제12권2호
• /
• pp.123-128
• /
• 2002

본 논문에서는 유전 알고리즘을 사용하여 생성된 제어규칙과 멤버쉽함수를 갖는 퍼지 교통 제어기가 교차로 관리를 위해 제시된다. 일반적인 퍼지 교통 제어기들은 사람에 의해 생성된 제어규칙과 멤버쉽함수들을 사용한다. 그러나 이 방식은 퍼지 제어 시스템을 설계하는데 최적의 해를 보장하지 못한다. 유전 알고리즘은 문제 영역에 관한 휴리스틱한 지식을 쉽게 획득하기 어려운 경우에 최적해를 구하는데 유용한 방법이다. 본 논문에서는 퍼지 교통 제어기들의 근사 최적 규칙과 멤버쉽 함수를 자동으로 결정하는데 유전 알고리즘을 사용한다. 제안된 방법의 효과는 교차로망 시뮬레이션을 통하여 입증하였다.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.551-561
• /
• 1992

A neural optimization network and fuzzy rules are proposed to control the redundant robot manipulators in an environment with obstacle. A neural optimization network is employed to solve the optimization problem for resolved motion control of redundant robot manipulators in an environment with obstacle. The fuzzy rules are proposed to determine the weights of neural optimization networks to avoid the collision between robot manipulators and obstacle. The inputs of fuzzy rules are the resultant distance and change of the distance and sum of the changes by differential motion of each joint. And the output of fuzzy rules is defined as the capability of collision avoidance of joint differential motion. The weightings of neural optimization networks are adjusted according to the capability of collision aboidance of each joint. To show the validities of the proposed method, computer simulation results are illustrated for the redundant robot of the planar type with three degrees of freedom.

• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.285-294
• /
• 2000

This paper shows that the proposed fuzzy-sliding mode control algorithm for a SCARA robot could reduce the chattering due to sliding mode control and is robust against a change of payload and parameter uncertainties. That is, the chattering can be reduced by changing control input for compensating disturbances into a control input by fuzzy rules within a pre-determined dead zone. The experimental results show that the chattering can be reduced more effectively by the fuzzy-sliding mode control algorithm than the sliding mode control with two dead zones. It is proved experimentally that the proposed control algorithm is robust to a change of payload. The proposed control algorithm is implemented to the SCARA robot using a DSP(board) for high speed calculations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.710-717
• /
• 1993

In this paper, we focus upon the design and applications of adaptive fuzzy-neuro controllers. An intelligent control system is proposed by exploiting the merits of two paradigms, a fuzzy logic controller and a neural network, assuming that we can modify in real time the consequential parts of the rulebase with adaptive learning, and that initial fuzzy control rules are established in a temporarily stable region. We choose the structure of fuzzy hypercubes for the fuzzy controller, and utilize the Perceptron learning rule in order to update the fuzzy control rules on-line with the output error. And, the effectiveness and the robustness of this intelligent controller are shown with application of the proposed adaptive fuzzy-neuro controller to control of the cart-pole system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2196-2198
• /
• 2002

Fuzzy controller design consists of intuition, and any other information about how to control system, into a set of rules. These rules can then be applied to the system. It is very important to decide parameters of IF-THEN rules. Because Fuzzy controller can make more adequate force to the plant by means of parameter optimization, which is accomplished by learning procedure. In this paper, we apply adaptive fuzzy controller designed to the Rotary Inverted Pendulum.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1370-1373
• /
• 1993

In controlling a system having many variables to control and multi objectives to satisfy such as a roof crane system, it is often difficult to obtain fuzzy If-Then rules in usual ways. As an alternative, we can more easely obtain rules in such a manner that we obtain each independent group of rules using partial variables for a partial objective. In this case, obtained rules can be conflicting with each other and conventional inference methods cannot handle such rules effectively. In this paper, we propose a roof crane controller with optimal velocity profile generator and a fuzzy logic controller with an inference method suitable for such conflicting rules.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.164-167
• /
• 2004

In the paper is proposed a hierarchical adaptive fuzzy controller for balancing and position control of the inverted pendulum system. Because balancing control rules of the pendulum and position control rules of the cart can be opposite, it is difficult to design an adaptive fuzzy controller that satisfy both objectives. To stabilize the pendulum at a specified position, the hierarchical adaptive fuzzy controller consists of a robust indirect adaptive fuzzy controller for balancing, a forced disturbance generator which emulates heuristic control strategy, and a supervisory decision maker for the arbitration of two control objectives It is proved that all the signals in the overall system are bounded. Simulation results are given to verify the proposed adapt i ye fuzzy control method.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.339-350
• /
• 2001

To overcome problems in tracking error related to the unmodeled dynamics in the high speed operation of industrial robots, many researchers have used sliding mode control, which is robust against parameter variations and payload changes. However, these algorithms cannot reduce the inherent chattering which is caused by excessive switching inputs around the sliding surface. This study proposes a fuzzy-sliding mode control algorithm to reduce the chattering of the sliding mode control by fuzzy rules within a pre-determined dead zone. Trajectory tracking simulations and experiments show that chattering can be reduced prominently by the fuzzy-sliding mode control algorithm compared to a sliding mode control with two dead zones, and the proposed control algorithm is robust to changes in payload. The proposed control algorithm is implemented to the SCARA (selected compliance articulated robot assembly) robot using a DSP (digital signal processor) for high speed calculations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.519-521
• /
• 1999

An adaptive fuzzy controller is constructed from a set of fuzzy IF-THEN rules whose parameters are adjusted on-line according to some adaptation law for the purpose of controlling the plant to track a given trajectory. Adaptive fuzzy controller of this paper is designed based on the Lyapunov synthesis approach The adaptive fuzzy controller is designed through the following steps: first, construct an initial controller based on linguistic descriptions(in the form of fuzzy IF-THEN rules) about the unknown plant from human experts; then, develop an adaptation law to adjust the parameters of the fuzzy controller on-line, the adaptive fuzzy controllers are used to control the inverted pendulum to track a given trajectory.