• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.72-80
• /
• 2013

This study is to develop and evaluate an AFS and an ARS controllers to enhance lateral stability of a vehicle. A sliding mode control (SMC) and a fuzzy logic control (FLC) methods are applied to calculate the desired additional steering angle of AFS equipped vehicle or desired rear steer angle of ARS equipped vehicle. To validate AFS and ARS systems, an eight degree of freedom, nonlinear vehicle model and an ABS controllers are also used. Several road conditions are used to test the performances. The results showed that the yaw rate of the AFS and the ARS vehicle followed the reference yaw rate very well within the adhesion limit. However, the AFS improves the lateral stability near the limit compared with the ARS. Because the SMC and the FLC show similar vehicle responses, performance discrimination is small. On split-${\mu}$ road, the AFS and the ARS vehicle had enhanced the lateral stability.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.671-672
• /
• 2008

Hybrid intelligent technique is used in ship steering control. It can make full use of the advantage of all kinds of intelligent algorithms. This provides an efficient way for this paper. An RBF neural network and GA optimization are employed in a fuzzy neural controller to deal with the nonlinearity, time varying and uncertain factors. Utilizing the designed network to substitute the conventional fuzzy inference, the rule base and membership functions can be auto-adjusted by GA optimization. The parameters of neural network can be decreased by using union-rule configuration in the hidden layer of the network. The ship control quality is effectively improved in case of appending additional sea state disturbance. The performance of controller is evaluated by the system simulation using Matlab.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2351-2353
• /
• 1998

This paper suggests the wheel controller for PWS(Power Wheeled Steering) mobile robot. The proposed controller consists of two parts. To control each motor, the sliding mode controller implemented. This method has robustness about modeling error and disturbance, so the velocity tracking is well guaranteed in the presence of varying load. The design of a fuzzy cross-coupling controller for a PWS mobile robot is described here. Fuzzy cross-coupling control directly minimizes the tracking error by coordinating the motion of the two drive wheels. The fuzzy cross-coupling controller has excellent disturbance rejection and therefore is advantageous when the robot is not loaded symmetrically. The capability of the proposed controller was verified through the computer simulation.

• Journal of Navigation and Port Research
• /
• v.35 no.5
• /
• pp.359-363
• /
• 2011

In this paper, automatic control system for the Manta UUV are constructed for the diving and steering maneuver. PID controller and Fuzzy controller are adopted in this system. Based on the 6DOF dynamic equation, simulation program has been developed using the Matlab. Using this program, depth control system and heading control system with tidal current are evaluated.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.7
• /
• pp.313-317
• /
• 2001

This paper proposed a fuzzy logic cross coupled controller which can enhance the path tracking performance of optically guided AGV(Automated Guided Vehicle). The AGV follows the guide path, it cannot be avoid the deviation from the path due to the inevitable error and the deviation must be corrected. Optically guided AGV used in industrial area is controlled by On-Off controller generally, the experimental AGV has three optical sensors in front body. In this structure, we could not know the leaving distance accurately and steering angle from the guided line, so AGV could not be controlled properly with conventional controller in the case of increasing or decreasing velocity. If we mount additional sensors the AGV, we could know the leaving distance and steering angle from the guided line and proper error compensating methode can be applied. But because cost of sensors are high, the cost of total system is increasing. So, in this paper, to improve the tracking performance of AGV which has the minimum number of sensors and fuzzy logic cross coupled controller is proposed. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.301-310
• /
• 2000

An autonomous tractor system was developed and its performance was evaluated. The system consisted of a tractor system of and a remote control station. The tractor and the remote control station communicated each other via wireless modems. The tractor had a DGPS(differential global positioning system), sensors, a controller and a modem. The DGPS collected position data and the tractor status was estimated. The information of tractor status and sensors was transferred to the remote control station. Then, the control station determined the control data such as steering angles using a fuzzy controller. The fuzzy controller used the information from the DGPS, sensors, and GIS(geographic information system) data. The control data were obtained by remote signal processing at the control station The control data for autonomous operation were transferred to the tractor controller. The performances of an autonomous tractor were evaluated for various speeds, different initial positions and different initial headings. About 1.3 seconds of time lag was occurred in transferring the tractor status data and the control data. Compensation the time lag, about 27cm deviation was observed at the speed of 0.5m/s and 37cm at the speed of 1m/s. Error caused mainly by the time lag and it would be reduced by developing a full-duplex radio module for controlling the remote tractor.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.69-77
• /
• 2009

In this study an ANFIS-based trajectory tracking motion control algorithm is proposed for autonomous garage and parallel parking of a model car. The ANFIS controller is trained off-line using data set which obtained by Mandani fuzzy inference system and thereby the processing time decreases almost in half. The controller with a steering delay compensator is tuned through simulations performed under MATLAB/Simulink environment. Experiments are carried out with the model car for garage and parallel parking. The experimental results show that the trajectory tracking performance is satisfactory under various initial and road conditions

• Journal of the Korean Institute of Navigation
• /
• v.23 no.2
• /
• pp.1-9
• /
• 1999

A trailer truck is a major equipment for transporting containers, and its driving is difficult due to two degrees of freedom which exist in the joint part between truck and trailer. Especially Backing a trailer truck to a parking home is a difficult exercise for all but the most skilled truck drivers. Normal driving instincts lead to erroneous movements. When watching a truck driver backing toward a parking home, one often observes the driver backing, going forward, backing again, going forward, etc., and finally backing to the desired position along the parking home. This paper discusses the design of the controller to control the steering of a trailer truck while only backing up to a parking home from an initial position. In this paper, we propose a backing up control system for a container trailer truck using fuzzy theory where the primitive fuzzy control rules are macroscopically designed using an expert's knowledge, and the control rules are regulated by LIBL(Linguistic Instruction Based Learning) to enable to back up successfully the trailer tuck to a parking home from arbitrary initial position. The validity of the proposed parking control system is shown by applying it to some initial positions on the simulator for container trailer truck.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2756-2759
• /
• 2000

In this paper. A PID motion controller based on the fuzzy concept is discussed for nonholonomic mobile robot. The difficulties in controlling such a Mobile robot vehicle lies in the fact that it usually has only two degrees of freedom for motion control in a tracking mode. It makes the control of speed and steering possible to decompose the error between the reference posture and the current posture. The Gyro compass is used to measure the position of robot. The proposed nonholonomic mobile robot is shown to follow the reference trajectory and compensate the dynamics. Simulation results are provided to validate the proposed controller. Experiments have been used to verify the effectiveness and robustness of the motion controller.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.801-804
• /
• 2003

The autopilot system of vessel is proposed to take service safety sorority, to elevate service efficiency, to decrease labor and to improve working environment. Ultimate purpose of it is to minimize the number of crew by guaranteeing economical efficiency of shipping service. Recently, the research is being achieving to compensate various nonlinear parameters of vessel and apply it is course keeping control, track keeping control, roll-rudder stabilization, dynamic ship positioning and automatic mooring control etc. using optimizing control technique. Relation between rudder angle controlled by steering machine of vessel and ship-heading angle, and load condition of ship are nonlinear, which affect various parameters of shipping service. The speed and direction of waves, velocity and quantity of wind, which also cause the non-linearity of it. Therefore the autopilot system of ship requires the robust control algorithm can overcome various non-linearity. On this paper, we design the autopilot system of ship, which overcome nonlinear parameters and disturbance of it using Fuzzy Algorithm, evaluate the proposed algorithm and its excellence through simulation