• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.365-370
• /
• 1998

The creep strain of the compression zone of concrete beams subjected to cyclic loading should be a significant factor in increasing strain and deflections. An analytical model which is similar to a previous one is presented to predict the increase in cyclic creep strain and the damage using the properties of the constituent materials: concrete and steel. The analytical expressions are compared with our experimental data. The effect of concrete-creep is accounted by the term En, Icr,n, and Mcr,n. In this study, it is proved that cyclic creep exponents 'n' in Cyclic Creep Model, according to the parameters -strength, range of stress- have the various values. It is hoped that with the availability of more experimental data and better understanding of some of the complex behavior, the model could be further improved.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.463-468
• /
• 2016

With the constant increase in network traffic, wireless operators are finding it more challenging to keep network hardware costs to a minimum. At the same time, the energy cost associated with operating a network has increased proportionally. Therefore, the search for higher network capacity is simultaneously accompanied by the search for a cost-efficient network deployment. In this paper, we show that a saving in transmitted signal energy can be achieved at the signal design level by deploying very specific signal processing techniques. Using an orthogonal frequency-division multiplexing signal for Long-Term Evolution networks as an example, we utilize a novel non-uniform companding quantizer to save a transmitted signal energy. Our results show that by using non-uniform quantization it is possible to further optimize 4G wireless networks.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.87-93
• /
• 2014

PURPOSES : To evaluate the feasibility of cut waste fishing net as a reinforced fiber for concrete. METHODS : Strength characteristics of fiber reinforced concrete using waste fishing net were investigated. The cut waste fishing nets with 4~5cm length were putted into the soil-cement and cement concrete for pavement slab. RESULTS : Compression and tensile strength of fiber reinforced concrete using waste fishing net were increased. CONCLUSIONS : It was concluded that cut waste fishing net can be used as a reinforced fiber for cement concrete. However, sometimes using cut waste fishing net leads to decrease the strength; therefore, further researches are needed for real project.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.12-14
• /
• 2006

This paper presents a novel scene change detection method using intra prediction mode and edge direction in H.264/AVC. When scene change occurs, there are less temporal correlation between frames, most of macro-blocks encoded in intra mode. Using this property, the method calculates the percentage of intra mode blocks in each predictive frame in order to get candidates of scene change frame. To further find scene change, we obtain edge histogram of each candidates by using eight prediction direction of intra prediction mode in H.264/AVC. We detect scene change frames with $\iota^1$-norm of edge histograms. The experimental results show that the method is efficient and robust.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3521-3526
• /
• 2016

Digital breast tomosynthesis (DBT) as a breast cancer screening modality, through generation of three-dimensional images during standard mammographic compression, can reduce interference from breast tissue overlap, increasing conspicuity of invasive cancers while concomitantly reducing false-positive results. We here conducted a systematic review on previous studies to synthesize the evidence of DBT efficacy, eventually 18 articles being included in the analysis. The most commonly emerging topics were advantages of DBT screening tool in terms of recall rates, cancer detection rates and cost-effectiveness, preventing unnecessary burdens on women and the healthcare system. Further research is needed to evaluate the potential impact of DBT on longer-term outcomes, such as interval cancer rates and mortality, to better understand the broader clinical and economic implications of its adoption.

• Journal of Korea Multimedia Society
• /
• v.20 no.7
• /
• pp.1148-1155
• /
• 2017

This study examined the storytelling characteristics of the super-compressed web drama "72 seconds". By analyzing all seasonal episodes of "72 seconds" and applying the various storytelling methodologies and related theories, this paper derived the main storytelling characteristics of "72 seconds" as follows. First, through the composition of the microscopic non-plot, the story value of empathy and fun is maximized, even though there is no dramatic composition compared to the general movie or drama. Second, by the specialization of everyday life, it leads to the transition from everyday experience to the new context. In other words, it provides a consensus through the cognitive expansion and interest by unfamiliarity of the ordinary experience to the audience. Third, based on the characteristics of super-compression and short theme, it utilizes fully stylistic narration like rapping. This makes the audience feel novel and further enhances the branding effect of content. And finally, based on various hybridity and variation, it uses remediation actively in all respects, especially comedy genre and comic factor.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.199-204
• /
• 2000

A low temperature differential model stirling engine is manufactured, and its operation characteristics are measured and analyzed by SIMPLE analysis model, in which heat transfer processes are simply considered. The heat transfer coefficients between working fluid and heat sources in the analysis are estimated by comparing the P-V diagrams by experiment and by analysis. This result may be very useful for further design and manufacture of model Stilting engines as well as real engines because it provides a comparatively correct predictions of the operation conditions and power output. It will be also conveniently used as an educational material for mechanical engineering students because it can be a nice example of optimal design process to decide the phase angle and compression ratio of engine design with a simple but realistic simulation.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.484-492
• /
• 2010

Magnetic switch is a kind of saturable inductor, which utilizes nonlinearity of the magnetization curve of ferromagnetic materials. The right understanding of the saturation phenomena, magnetic properties, voltage-time product, and switching characteristics of the magnetic switch is essential in designing the magnetic pulse compressor (MPC). In this paper, the historical background of research on the MPC, fundamental physical properties of the magnetic switches, and application fields of the MPC are presented. Further, an in-depth analysis of pulse compression in series and parallel MPCs is incorporated. As practical application examples, a series MPC used for water treatments and a parallel MPC used for pulsed electric field (PEF) inactivation of bacteria are cited.

• Journal of Chest Surgery
• /
• v.22 no.6
• /
• pp.1061-1069
• /
• 1989

A case of liposarcoma was reported in 52 year-old female. She had the operation history due to mediastinal lipoma at other Hospital before 26 months ago. Chest X-ray revealed a huge soft tissue mass- density at the entire right lung field, and left middle and lower lung field at admission. At the lateral film, the mass was located in the anterior and middle mediastinum. Transsternal bilateral thoracotomy was performed, followed by extirpation of liposarcoma, wedge resection of superior vena cava, angioplasty of superior vena cava, and then partial pericardiectomy. The post-operative treatment was 5500 rad irradiation. Post-operative course was uneventful, that was noticed by OPD follow-up for 10 months. Primary liposarcoma of the mediastinum is very rare tumor. This tumor grows to an enormous size, and symptoms are referable to compression of the contiguous intrathoracic structures. The treatment of choice is surgery in all cases. Such an approach serves to establish a tissue diagnosis, to relieve the patients* symptoms, and may results in a cure sometimes. Radiotherapy or/and chemotherapy seems to be ineffective, but should be further studied.

• Advances in Computational Design
• /
• v.1 no.2
• /
• pp.207-220
• /
• 2016

The aim of this study is to investigate the effect of stiffened element and edge stiffener in the behaviour and flexural strength of built-up cold-formed steel beams. An experimental and analytical analysis of CFS channel sections in four different geometries is conducted, including simple channel sections, a stiffened channel section with or without edge stiffeners. Nonlinear finite element models are developed using finite element analysis software package ANSYS. The FEA results are verified with the experimental results. Further, the finite element model is used for parametric studies by varying the depth, thickness, and the effect of stiffened element, edge stiffener and their interaction with compression flanges on stiffened built-up cold-formed steel beams with upright edge stiffeners. In addition, the flexural strength predicted by the finite element analysis is compared with the design flexural strength calculated by using the North American Iron and Steel Institute Specifications for cold-formed steel structures (AISI: S100-2007) and suitable suggestion is made.