• Korean Journal of Materials Research
• /
• v.32 no.7
• /
• pp.326-331
• /
• 2022

AZ31 magnesium alloy was used to manufacture a thin plate using a melt drag method. The effects of roll speed, molten metal temperature, and molten metal height, which are the basic factors of the melt drag method, on the surface shape, the thickness of the thin plate, Vickers hardness, and microstructure of the thin plate were investigated. It was possible to manufacture AZ31 magnesium alloy thin plate at the roll speed range of 1 to 90 m/min. The thickness of the thin plate, manufactured while changing only the roll speed, was about 1.8 to 8.8 mm. The shape of the solidified roll surface was affected by two conditions, the roll speed and the molten metal height, and the Vickers hardness of the manufactured magnesium alloy thin plate value ranged from Hv38~Hv60. The microstructure of the thin plate produced by this process was an equiaxed crystal and showed a uniform grain size distribution. The grain size was greatly affected by the contact state between the molten metal and the solidification roll, and the amount of reactive solids and liquids scraped at the same time as the thin plate. The average grain size of the thin plate fabricated in the range of these experimental conditions changed to about 50-300 ㎛.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.3
• /
• pp.25-33
• /
• 2022

Due to the standardized urban development since the industrial era, many urban spaces have experienced non-placeness. Recently, although interest in urban landscape, history, and cultural elements has been increasing, landscape management and control measures are being implemented mainly in large cities due to the low status of rural areas in the country. From this point of view, this study tried to lay the foundation for basic research in related fields by classifying the characteristics and types of streetscapes located near large cities, and to suggest directions that should be considered when managing streetscapes in the future. As a result of the analysis of landscape adjectives, the village felt secluded due to the low density compared to the city street overall, but it did not have a unique image of the region. Three factors were derived through factor analysis, and preference was affected in the order of aesthetic, regularity, and uniqueness. In addition, the research site was classified into three types through cluster analysis, and it was confirmed that the differences by type were due to aesthetics and naturalness. On the other hand, the uniqueness is generally low in all regions, so it seems that fundamental countermeasures are needed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1516-1539
• /
• 2022

This article shows a set of physical information fusion IoT systems that we designed for smart buildings. Its essence is a computer system that combines physical quantities in buildings with quantitative analysis and control. In the part of the Internet of Things, its mechanism is controlled by a monitoring system based on sensor networks and computer-based algorithms. Based on the design idea of the agent, we have realized human-machine interaction (HMI) and machine-machine interaction (MMI). Among them, HMI is realized through human-machine interaction, while MMI is realized through embedded computing, sensors, controllers, and execution. Device and wireless communication network. This article mainly focuses on the function of wireless sensor networks and MMI in environmental monitoring. This function plays a fundamental role in building security, environmental control, HVAC, and other smart building control systems. The article not only discusses various network applications and their implementation based on agent design but also demonstrates our collaborative information fusion strategy. This strategy can provide a stable incentive method for the system through collaborative information fusion when the sensor system is unstable in the physical measurements, thereby preventing system jitter and unstable response caused by uncertain disturbances and environmental factors. This article also gives the results of the system test. The results show that through the CPS interaction of HMI and MMI, the intelligent building IoT system can achieve comprehensive monitoring, thereby providing support and expansion for advanced automation management.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.1
• /
• pp.23-32
• /
• 2009

This study was conducted to generate fundamental data required by food coordinators and food space creators for planning and directing table settings. The results of this study were then used to suggest an ideal model of table settings for Korean-style food equipped with simple, sophisticated, and practical characteristics. Specifically, this study evaluated the importance of hygiene (safety, cleanness, arrangement), decoration (dignity, form, stylishness, presentation of food on plates), naturalness (seasonal beauty, comfortableness, natural beauty), and modernity (modern style, chic style, urban style). These factors were evaluated according to the preference of the table setting and the characteristics of the meeting, which fit various meal cultures, times, places, and objectives. The results of this study indicate that people prefer hygiene and decoration for family meetings (bansang setting), hygiene and modernity for friendly meetings (simple buffet setting), hygiene and decoration for company meetings (simple buffet setting), and hygiene and decoration for academic meetings (tea party). Hygiene and decoration were highly evaluated in most cases, which indicates that individuals at meetings for special purposes give weight to the meeting's atmosphere, but also consider the hygiene and cleanliness of the food.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.411-414
• /
• 2015

The purpose of this study is to conduct a comparative analysis between Korea and the United States of the supply process of unit modular housing at both the factory production phase and the transportation and lifting phase, as part of an attempt to invigorate the unit modular housing market in Korea. Unlike the practice in the United States, one of Korea's unique characteristics is that the floor is constructed with reinforced concrete and hot water heating system. To do this, the wet method in Korea is used that includes concrete placement, curing and constructing hot water floor heating system at the factory production phase, which results in a longer production time and also requires the lifting of heavier loads. In the United States, interior and exterior finishing works of modular housing are performed by different companies, and the distance between the unit module factory and the construction site is quite far. This kind of dualized production structure may cause confusion when it comes to schedule management, procurement management, and stock management. Moreover, problems caused by external environmental factors such as wind and rainfall were reported in the course of long-distance transportation. The results of this case comparison are expected to provide fundamental data that will reduce the amount of trial and error in the unit module production, transportation and lifting work in Korea, which has a comparatively small number of unit modular housing cases.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.301-306
• /
• 2023

Attention is a fundamental aspect in the cognitive process of human. Cognitive system of human body requires to focus on selected information among a vast amount of information from sensory organs. It has widely studied that various environmental factors affected the level of attention; however, few researches have aimed to the effect of direct cryotherapy. In this research, level of attention was studied comparing sub-indexes of FAIR test between groups with different duration of direct cryotheapy to the back of neck. FAIR test is a evaluation tool for visual attention consisting of three sub-indexes. Selective attention, accuracy of attention, and persistence of attention can be independently analyzed by FAIR test. In the analysis of selective attention, cryotherapy for 5 to 20 minutes showed higher result than cryotherapy for 40 minutes. In the analysis of persistence of attention, cryotherapy for 5 to 15 minutes showed higher result than cryotherapy for 40 minutes. Overall, selective attention and persistence of attention turns out to be maximized between 5 to 20 minutes of cryotherapy and tends to decrease afterwards. However, accuracy of attention does not seem to be affected by the duration of cryotherapy. Correlation between selective attention and the skin temperature by cryotherapy tends to be negative supporting the findings by ANOVA and post-hoc test. Correlation between persistence of attention and the skin temperature showed similar results.

• Biomedical Science Letters
• /
• v.29 no.3
• /
• pp.95-102
• /
• 2023

The inner ear constitutes a complex organ responsible for auditory perception and equilibrium. It comprises diverse cellular entities operating collaboratively to perceive and transmit sensory information to the brain. Inner ear disease is a sophisticated and multifactorial scenario substantially impacting the quality of life of affected individuals. Gaining insights into the developmental process of the inner ear is crucial for diagnosing and treating inner ear diseases, which can lead to hearing loss and impaired balance. Recent research in inner ear development and associated pathophysiology has focused on several pivotal domains, including identifying new genes and signaling pathways involved in inner ear development, using stem cells for inner ear regeneration, and developing novel therapies for inner ear diseases. Recent advances in genetics research have shed new light on the fundamental etiologies of inner ear diseases, with a growing body of evidence suggesting that genetic mutations might exert a pivotal influence on the development and progression of this condition. In this review, we have delved into certain common genetic mutations linked to inner ear disorders. We also discussed ongoing research endeavors and future directions for understanding the genetic mechanisms underlying this condition and potential therapeutic avenues.

• Korean Journal of Culture and Social Issue
• /
• v.11 no.spc
• /
• pp.57-67
• /
• 2005

This paper attempted to explore the plausible reasons why change activities to build up organizational trust might be often short-lived, even though it can become the most valuable social capital for an organization. Based upon a reference data collected from a large company in various methods, retrospective rationalization, difficulties embedded in the processes of realizing the five bases of organizational trust (such as openness, consistence, fairness, consideration, and pride), and top management's negative conviction were identified and discussed as fundamental reasons for the distrust in the usefulness of organizational trust. In addition, middle managers' overcautiousness about their superiors' feeling and organizational cynicism as contributing factors for the distrust in the form of vicious circle were discussed.

• CELLMED
• /
• v.14 no.2
• /
• pp.6.1-6.6
• /
• 2024

The prevalence of respiratory diseases is increasing due to social and environmental factors such as increased environmental pollution and air pollution, and among them, chronic obstructive pulmonary disease (COPD) in particular has a high mortality and morbidity rate worldwide. As a result, medical expenses are rapidly increasing, creating a social and economic burden. In response to this, there is a need to discuss ways to reduce the risk from diseases and manage them appropriately, and the most basic starting point in this process is how these chronic lung disease patients are treated in actual clinical settings and how to improve the quality of treatment. There is a need to look into whether there are effective drugs. Western treatment for chronic obstructive pulmonary disease is basically a disease in which the airway narrows, so bronchodilators are used to widen the bronchi, and corticosteroids and antibiotics are mainly used to relieve the inflammatory response in the lungs. However, since the mainly used Western medicine does not serve as a fundamental therapeutic drug and contains many side effects, there is a need for drugs that improve the quality of life of patients and are more effective in managing symptoms as symptomatic prescriptions. Therefore, Western and Oriental medicine treatments are needed. The purpose is to suggest better treatments through comparative analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.3
• /
• pp.528-550
• /
• 2024

Warehousing demand prediction is an essential part of the supply chain, providing a fundamental basis for product manufacturing, replenishment, warehouse planning, etc. Existing forecasting methods cannot produce accurate forecasts since warehouse demand is affected by external factors such as holidays and seasons. Some aspects, such as consumer psychology and producer reputation, are challenging to quantify. The data can fluctuate widely or do not show obvious trend cycles. We introduce a new model for warehouse demand prediction called MAGRU, which stands for Multi-layer Attention with GRU. In the model, firstly, we perform the embedding operation on the input sequence to quantify the external influences; after that, we implement an encoder using GRU and the attention mechanism. The hidden state of GRU captures essential time series. In the decoder, we use attention again to select the key hidden states among all-time slices as the data to be fed into the GRU network. Experimental results show that this model has higher accuracy than RNN, LSTM, GRU, Prophet, XGboost, and DARNN. Using mean absolute error (MAE) and symmetric mean absolute percentage error(SMAPE) to evaluate the experimental results, MAGRU's MAE, RMSE, and SMAPE decreased by 7.65%, 10.03%, and 8.87% over GRU-LSTM, the current best model for solving this type of problem.