• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.79-87
• /
• 2017

The open bite malocclusion is a common clinical entity and has multifactorial causes. Development of effective treatment plan and management is dependent on proper diagnosis. The skeletal open bite patient requires a coordinated orthodontic and orthognathic surgical approach to achieve stable occlusion, acceptable esthetics, and improved function. But in case of open bite with severely decayed dentition, restoration in the entire dentition is necessary. Using the facial analysis and diagnostic wax-up, the most effective treatment was prosthetic rehabilitation. The provisional restorations were fabricated to satisfy esthetic and functional requirements, which result in the uniformly distributed occlusal force, anterior and canine guidance. The inter-arch relationship, labio-dental harmony, and the soft tissue aspect, which is important to estimate the longevity were evaluated. Definitive restorations of monolithic zirconia were made by replicating provisional restorations by using the latest CAD/CAM technology. They were delivered to the patient and clinical follow-up observation was satisfactory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1571-1578
• /
• 1999

In this paper, we present the Modulator Channel Card and VLSI chip for the Radio Transceiver Unit (RTU) of direct sequence code division multiple access (DS-CDMA) Wireless Local Loop (WLL) System. The Modulator Channel Card is designed and implemented using ASIC's, FPGA's and DSP's. The ASIC, compliance with Common Air Interface specification proposed by ETRI, has 40K gates which is designed to operate at 32MHz, and is fabricated using $0.6\mu\textrm{m}$ CMOS process. The ASIC carries out for I- or Q- phase data channel signal processing at a time, where each data channel processing consists of channel coding, block interleaving, scrambling, Walsh modulation, Pseudo-Noise (PN) spreading, and baseband filtering. The Modulator Channel Card has been integrated as a part of RTU of WLL system and is confirmed that it meets all functional and performance requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1704-1709
• /
• 2010

A small number of countries are leading the world in the development of advanced weapon systems. In general, the access to the information on the design of advanced systems is limited. As such, when similar weapon systems need to be developed, a special methodology must be considered to catch up with both the technological and information barriers. In this paper, we study a design methodology based on the combination of the reverse engineering and the design structure matrix (DSM) approach. The methodology begins by analyzing the advanced system by reverse engineering and produces a set of design results in the form of physical architecture, functional architecture and system requirements. The design results are further enhanced by applying the DSM clustering. As a result, one can get an improved design result. As a target system, a guided missile system was considered.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.211-235
• /
• 2004

Component based design is perceived as a key technology for developing advanced real-time systems in a both cost- and time effective manner. Already today, component based design is seen to increase software productivity, by reducing the amount of effort needed to update and maintain systems, by packaging solutions for re-use, and easing distribution. Nowdays, a thousand and one companies in If(Information Technology) industry such as Sl(System Integration) and software development companies, regardless of scale of their projects, has spent their time and endeavor on developing reusable business logic. The component software is the outcome of software developers effort on overcoming this problem; the component software is the way propositioned for quick and easy implementation of software. In addition, there has been lots of investment on researching and developing the software development methodology and leading If companies has released new standard technologies to help with component development. For instance, COM(Component Object Model) and DCOM(Distribute COM) technology of Microsoft and EJB(Enterprise Java Beans) technology of Sun Microsystems has turned up. Component-Based Development (CBD) has not redeemed its promises of reuse and flexibility. Reuse is inhibited due to problems such as component retrieval, architectural mismatch, and application specificness. Component-based systems are flexible in the sense that components can be replaced and fine-tuned, but only under the assumption that the software architecture remains stable during the system's lifetime. In this paper, It suggest that systems composed of components should be generated from functional and nonfunctional requirements rather than being composed out of existing or newly developed components. about implements and accomplishes the modeling for the Product Control component development by applying CCD(Contract-Collaboration Diagram), one of component development methodology, to MRP(Material Requirement Planning) System

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.145-150
• /
• 2007

The spacer grid set is a component in the nuclear fuel assembly. The set supports the fuel rods saftely. Therefore, the spacer gl1d set should have sufficient strength for the external impact forces. The fretting wear occurs between the spring of the fuel rod and the spacer grid due to tile flow-induced vibration. The conceptual design of the spacer grid set is performed based on the Independence Axiom of axiomatic design. Two functional requirements are defined and corresponding design parameters are selected. The overall flow of the design is defined according to the application of axiomatic design. The design for the impact load is carried out by using nonlinear dynamic analysis to determine the length of the dimple. Topology optimization is carried out to determine a new configuration of the spring. The fretting wear is reduced by shape optimization using the homology theory. In the design to reduce the fretting wear, the deformed shape of the spring should be the same as that of the fuel rod. This condition is transformed to a function and considered as a constraint in the shape optimization process. The fretting wear is expected to be reduced due to the homology constraint. The objective function is minimizing the maximum stress to allow a slight plastic deformation. Shape optimization results are confirmed through nonlinear static analysis because the contact area becomes wider.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.564-573
• /
• 2018

External environment of enterprises are rapidly changing brought about mainly by global competition, cost and profitability pressures, and emerging new technology. In particular, frequent change of customer requirements is a tough challenge to manufacturing company. To cope with these challenges, a production planning and scheduling (PP&S) function might be established to provide accountability for both customer service and operational efficiency. PP&S deals with short-term decision making in the production process of whole supply chain. The task of PP&S is to seek a balance between customer orders and limited resources. At present, many PP&S software solutions have been utilized in many enterprises to generate a realistic production plan and schedule efficiently. The aim of this paper is to analyze the PP&S functionalities and its system architecture from the perspective of SCM (Supply Chain Management), and propose the PP&S solution classification framework to facilitate the comparison among various solutions.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.2
• /
• pp.218-227
• /
• 2005

Ocean resources have a very important role to meet the requirements of the people's leisure activities in a limited country, so fishing villages and fishing ports are getting more and more important as a source of supply to satisfy the demands as time goes on. There are various and far-reaching approaches to the fishing villages and fishing ports. However, studies to present the over-all direction of development policy for fishing villages and fishing ports have been short; especially the studies which have been dealing with Busan were verified to be very short relatively. As a result of survey, both officials in charge and residents in fishing villages have an enough understanding of what problems the development of fishing villages have and it's direction of development and spreading effects. In the part of the policy of developing fishing ports, officials answered that insufficient synthetic estimation was main problem in developing the fishing ports, while residents had a high recognition that local fishing ports and small scale fishing ports have had poor progress relatively. In the analysis of difference between two group about the spreading effects of developing fishing villages and fishing ports, they had affirmative opinions rather than negative ones without exemption. As mentioned above, it is a right direction to develop the existing fishing ports as well as new fishing ones to the multi-functional synthetic fishing ports. The specialized development should be made so that the special quality of coastal resources, which fishing villages have, will be made the best use of.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.30-39
• /
• 2020

As 5G mobile communication services are provided, efforts are being made to provide various services to users with ultra-low latency. This raises interest in edge computing, which can provide high performance computing services near users instead of cloud computing at the network core. This paper presents an efficient operation and management scheme of a micro data center, which is an essential equipment for realizing edge computing. First, we present the functional structure and deployment plan of edge computing. Next, we present the requirements for the micro data centers for edge computing and the operation and management scheme accordingly. Finally, in order to efficiently manage resources in the micro data centers, we present resource management items to be collected and monitored, and propose a performance indicator to measure the energy efficiency.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.686-697
• /
• 2005

The current challenge with which most shipyards are faced is to reduce the design time and the time-to-delivery benefits of new information technologies such as ERP, APS, and SCM system. These technologies should integrate the information that flows in the enterprise wide activities. First of all we should maintain control of ship design and product data such as bill of material, product structure, drawing, 30 modeling and manufacturing information for the integration. The product data management (POM) system copes with these requirements. All the product data is stored in POM database and vaults in a structured manner and all the changes of product data are monitored, controlled and recorded. This study discusses how POM system can be implemented in shipyard. The procedure is surveyed to apply a POM system for the ship design data management. This study also presents several examples in order to make a practical guidance for ship POM implementation. Proposed studies can be useful for shipyards planning to adopt POM systems in enterprise wide manner.

• Journal of Korean Society of Archives and Records Management
• /
• v.18 no.2
• /
• pp.163-188
• /
• 2018

How do we create a next generation Records Management System? Under a rapidly changing system development environment, the records management system of public institutions has remained stable for the past 10 years. For this reason, it seems to be the key cause of the structural problem of the Records Management System, which makes it difficult to accommodate user requirements and apply a new recording technology. The purpose of this study is to present a redesigned model for a next-generation records management system by analyzing the status of the electronic records management. This study analyzed "A Study on the Redesign of the Next-Generation Electronic Records Management Process," records management technology of advanced records management system, and a case of an overseas system. Based on the analysis results, the improvement direction of the records management system was analyzed from several aspects: functional, software design, and software distribution. This study thus suggests that the creation of a microservice architecture-based (MSA) and an open source software-oriented (OSS) records management system should be the focus of next-generation record management.