• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1657-1659
• /
• 2006

Success in moving ink jets into newer areas such as printing on to-be-defined flexible substrates or developing new functional fluids requires both process and fluid research and engineering. Today, leading-edge concepts are slow to be explored because of the expense and complexity of commercially available ink jet deposition systems, time and resources required to specify and acquire commercial ink jet systems and the expertise required to operate commercial ink jet systems.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.390-398
• /
• 2010

Aqueous gold nanoparticle dispersion was synthesized by chemical reduction method using diethanolamine as reducing agent and polyethyleneimine as dispersion stabilizer. The synthesis conditions for the stable dispersion of the gold nanoparticle suspension were determined by changing the amount of the reducing agent and dispersant during the wet chemical synthesis procedures. The face centered cubic lattice structure of the gold nanoparticles was confirmed by using X-ray diffraction and the morphologies of the nanoparticles were observed by transmission electron microscope. The synthesized gold nanoparticle dispersion was concentrated by evaporating the dispersion medium at room temperature followed by the addition of ethyleneglycol as humectant for the increase of the elastic properties to obtain gold nanoparticle inks for direct ink writing process. The line patterns were obtained with the gold nanoparticle inks during the writing procedures and the morphologies of the fine patterns were observed by scanning electron microscope.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.461-467
• /
• 2019

Ink-jet printing technology, which utilizes a digitalized design to print fine ink directly on a substrate, has been of interest in various industries due to its high efficiency and adaptability to various materials. Recently, active attempts have been made to apply ceramic materials having excellent heat resistance, light resistance, and chemical resistance to the ink-jet printing process. In this study, ceramic ink was synthesized by combining ceramic pigments with UV curable polymer. 3D printability at various contact angles between ceramic ink and substrate was analyzed in detail. Rheological properties of the synthesized ceramic ink were optimized to meet the requirements of the ink-jet printing process, and the contact angle of UV curable ceramic ink was controlled through surface treatment of the substrate. The potential for additive manufacturing of ceramic material using ink-jet printing was investigated by analyzing the effect of contact angle control on ceramic ink droplets and their 3D printability.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.209-213
• /
• 2006

Relationship between printability and rheological properties of UV flexographic (flexo) inks were investigated. UV flexo suspensions of carbon black in liquid medium having various binding materials such as acylate pre-polymer, di/multi-functional monomer, and diluents, were used as sample inks. Inks were characterized on a rheometer in terms of steady and dynamic behaviors. To understand the rheological properties of UV flexo inks, we must determine the specific rheological properties of chemical and/or physical interactions of their components (pigments, functional monomers, and pre-polymers). In particular, we discussed the influence of multi-functional monomers and the relationship between the rheological properties and transient networks formed by carbon black. In this study, we investigated the interrelationships between rheological properties of UV flexo inks and chemical and/or physical interactions of their components. To investigate correlations between the printability and the rheological behaviors induced by interfacial interactions between ink compositions, we carried out rheological tests of UV ink suspensions. The results were compared with printing tests so as to find out the relationship between printability and rheological properties of ink.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.22-31
• /
• 2002

In this paper, PVA(polyvinylalcohol), oxidized starch and SBR latex were used as binders for ink-jet printing papers, and their effects of the type and blending ratio of binders on ink-jet printing properties were compared. In case of coating color using PVA mainly used for a binder in ink-jet printing, spreading of printed letters decreased and excellent images were manifested resulting from strong hydrophilic of PVA. However, increasing solids content of coating color was somewhat limited because of the interaction of PVA and functional groups in silica as well as high molecular weight of PVA. When oxidized starch and SBR latex were mixed with PVA at desirable ratio to solve these problems, runnability in coating process was improved and good printing properties were shown. Gloss was improved when latex was used along with PVA as a binder because of the thermoplastic property of the latex. From this result, possibilities of high solids content and high gloss ink-jet printing papers were investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1466-1468
• /
• 2009

The preparation method of copper nanopowder by dry process for conductive ink was investigated. Inert gas condensation method was used to synthesize copper nanopowder. The produced powders was spherical and sized 10~100nm flowing the conditions. The results showed that input voltage and evaporation rate is critical variables for nano-sized copper powder.

• 한국식품영양학회지
• /
• 제20권3호
• /
• pp.311-316
• /
• 2007

This study was performed to develop a functional yellow layer cake with added cuttlefish ink, by evaluating its physiochemical properties and sensory qualities. Viscosity tended to increase, and height decrease, with the addition of cuttlefish ink. The sensory evaluation revealed the addition of cuttlefish ink in the cake. Specifically, at the 0.3% level color, flavor, and gumminess were enhanced. The brightness(L) of the crumb was highest in the in the control group, at 72.76, and decreased with increasing amounts of cuttlefish ink. The crust of the yellow layer cake was highest in the control group. Furthermore, redness(a) of the crumb was lowest in the control group. but for the crust, it was highest in the control group at crust. Yellowness(b) decreased with increasing amounts of cuttlefish ink for both the crumb and crust. The hardness, cohesiveness, gumminess, and chewiness of the yellow layer cake was highest in the control group.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.398-401
• /
• 2008

Inkjet printing is commonly used in the controlled deposition of solutions of functional materials in specific locations on a substrate, and it can provide easy and fast deposition of polymer films over a large area. which could become a way to manufacturer low cost solar cells. In the present study, inkjet printing technology is adopted to deposit functional layers of PEDOT/PSS solutions and P3HT/PCBM blends for organic solar cell. The results show that merging of separately deposited ink droplets into a continuous, pinhole-free organic thin film could be achieved by a balance between ink property and substrate treatment. As a result, a power conversion efficiency of 2.0% has been accomplished a solar cells applying inkjet technology.

• Tissue Engineering and Regenerative Medicine
• /
• 제15권6호
• /
• pp.761-769
• /
• 2018

BACKGROUND: Bioprinting has recently appeared as a powerful tool for building complex tissue and organ structures. However, the application of bioprinting to regenerative medicine has limitations, due to the restricted choices of bio-ink for cytocompatible cell encapsulation and the integrity of the fabricated structures. METHODS: In this study, we developed hybrid bio-inks based on acrylated hyaluronic acid (HA) for immobilizing bio-active peptides and tyramine-conjugated hyaluronic acids for fast gelation. RESULTS: Conventional acrylated HA-based hydrogels have a gelation time of more than 30 min, whereas hybrid bio-ink has been rapidly gelated within 200 s. Fibroblast cells cultured in this hybrid bio-ink up to 7 days showed >90% viability. As a guidance cue for stem cell differentiation, we immobilized four different bio-active peptides: BMP-7-derived peptides (BMP-7D) and osteopontin for osteogenesis, and substance-P (SP) and Ac-SDKP (SDKP) for angiogenesis. Mesenchymal stem cells cultured in these hybrid bio-inks showed the highest angiogenic and osteogenic activity cultured in bio-ink immobilized with a SP or BMP-7D peptide. This bio-ink was loaded in a three-dimensional (3D) bioprinting device showing reproducible printing features. CONCLUSION: We have developed bio-inks that combine biochemical and mechanical cues. Biochemical cues were able to regulate differentiation of cells, and mechanical cues enabled printing structuring. This multi-functional bio-ink can be used for complex tissue engineering and regenerative medicine.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.187-192
• /
• 2013

노즐을 이용한 인쇄 기법은 주로 전자 소자의 봉지를 위한 접착제의 인쇄분야에 적용되어 왔다. 노즐 인쇄를 통한 기능성 물질의 필름 형성은 커다란 도전이 될 수 있다. 본 논문에서는 노즐을 이용한 유기 잉크의 인쇄 특성을 실험을 통하여 알아보았다. 본 연구의 노즐 인쇄 실험에서 패턴을 형성하기 위한 잉크는 유기 발광 물질인 TAPC를 사용하였다. 인쇄된 패턴 폭은 잉크 공급 유량의 증가와 기판의 온도의 상승에 따라 증가하였다. 또한 인쇄된 패턴은 건조 후 커피링 형상을 나타내었다.