• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2020

The objective was to study the efficiency of Houttuynia cordata extract colorants as eco-friendly and functional dye for wool fabrics. Effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated. Also, antimicrobial activity and deodorization performance were evaluated. The Houttuynia cordata colorants showed good affinity to wool fabrics and produced YR Munsell color. The optimum condition of dyeing was 2.0% of colorants concentration(o.w.b.) at 100℃ for 60 minutes under pH 5.3. Regardless of the mordant type and mordanting method, mordants improved dye uptake and the increase in dye uptake by Fe mordant was higher than that of Al mordant. Al post-mordanting and Fe mordanting changed the color of dyed fabrics with Y Munsell color. The colorfastness of un-mordanted and Al post-mordanted fabrics were excellent above grade 4. Bacteria reduction rate(Staphylococcus aureus) of wool fabrics dyed with Houttuynia cordata colorants was excellent at 98.2%. Also, the deodorization was good at 81%. The results show Houttuynia cordata colorants can be used as a functional natural dye for wool fabrics.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.35-36
• /
• 2023

Safety management of steel frame members is a very important part to maintain safety and function. However, precise inspection is not possible for steel frame members due to finishing materials and insulation materials, leading to poor inspection. For steel members, an insulating spray coating method is used for high thermal conductivity. The insulation spray method is not only uneconomical, but also has the disadvantage of spoiling the aesthetics. In addition, VOCs are released from paints used in spraying, so a solution is needed. In this study, heating paint was used to improve the disadvantages of the insulation spray coating method and the high thermal conductivity of steel frame members. In addition to this, in order to reduce VOCs generated from the paint, active clay was added to produce a functional exothermic paint, and then the experiment was conducted. As the amount of activated clay increased, the film thickness increased, and the VOCs emission and thermal conductivity decreased.

• Journal of architectural history
• /
• v.14 no.3 s.43
• /
• pp.89-102
• /
• 2005

Frank Lloyd Wright and Mies van der Rohe are two of the most influential architects in modern architecture. In spite of the different values in their architectural lives, the design of high-rise building had been a continuous matter of primary concern for them. The purpose of this study is to compare the architectural characteristics of the two master architects in terms of building form, structure, function, and envelop skin. glass. Both of them shared with the principle of organic architecture even in the design of high-rise buildings. However, the specific approaches to realize it in high-rise buildings are significantly different. Although they emphasized the integration of building form and structure, Wright regarded the reinforced concrete structure as an organic form-giver, while Mies introduced the steel skeleton structure only as an efficient and flexible building frame. As primary finishing materials for high-rise buildings, glass was used for functional purpose by Wright, but for visual purpose by Mies.

• Textile Coloration and Finishing
• /
• v.14 no.3
• /
• pp.1-10
• /
• 2002

Tencel fabric cationized with chitosan can be effectively dyed with anionic dyes. To investigate the change of dyeing properties of cationized Tencel fabric, some experiments were performed under the several dyeing conditions with acid and reactive dyes. Whiteness index decreased with the increment of crosslinking agent concentration. The cationized Tencel fabric was dyed well by anionic dye such as acid dye, the dyeability of reactive dye was improved by addition of a little salt without alkali. The dye fixation on the cationized Tencel fabric was increased with chitosan concentration without electrolyte and alkali. The dyeability of Tencel treated with chitosan was better than controlled Tencel, especially under the acidic conditions. According to the number and the types of functional group of reactive dyes, dye affinity of the modified Tencel fabric varied and wash fastness of acid dye was better than reactive dye.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.195-200
• /
• 2011

Silicone-coated fabric were treated by oxygen low temperature plasma to improve the adhesion. The surface of silicone-coated fabric was modified with gaseous plasma of several discharge power in the presence of oxygen gas at 1Torr pressure. Oxygen plasma treatment introduces oxygen-containing functional groups and micro-pittings on the silicone-coated fabric surface. The treated fabrics with oxygen low temperature plasma were measured by contact angle analyzer and XPS(X-ray photoelectron spectroscopy), and interfacial adhesion was measured by T-peel test. The surface of fabric was investigated by SEM photographs. The chemical and physical modification of the surface wettabillity by plasma treatment can increase the adhesion.

• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.43-48
• /
• 2009

This paper surveys the mechanical properties of nylon high tenacity coarse yarn and fabric for military and technical textiles. For this purpose, 6 kinds of yarns and 2 kinds of fabrics are prepared. The yarn physical properties such as yarn count, thermal shrinkages, and tensile properties are measured and discussed with the characteristics of the domestic and imported yarns. And, the physical and mechanical properties of these fabrics are also measured and discussed with the usage of these fabrics in the military and technical textiles fields. Hereafter, the differences of physical properties between domestic and foreign yarn specimens for high functional military and technical fabrics are estimated through this study.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.359-366
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at$95^\circ{C}$ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.1-1
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at 95℃ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• Textile Coloration and Finishing
• /
• v.14 no.6
• /
• pp.313-318
• /
• 2002

Chitosan is known to be an excellent biocompatible natural polymer. Recently, with a growing interest of health and environment, chitosan which is good in no harmful effect on human body and environment, has been watched as the finish treatment of hygiene and pleasantness. The purpose of this study is to develop multi functional fabrics by chitosan added on acrylic acid grafted cotton fabrics. Therefore physical properties such as moisture regain, air permeability, whiteness, static voltage and tensile strength of chitosan added on acrylic acid grafted cotton fabrics were investigated. The results are as follows ; According to increased chitosan's concentration, grafting yield was decreased. Therefore thickness of film by treated chitosan added on acrylic acid grafted cotton fabric became thin. FT R spectra of chitosan add on acrylic acid grafted cotton fabric clearly showed peaks of COOH and $NH_2$, Moisture regain, static voltage of chitosan add on acrylic acid grafted cotton fabrics were increased than control. Air permeability, whiteness and tensile strength were decreased than control.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.57-64
• /
• 2003

Poly(ethylene-co-vinyl acetate)(EVA) microspheres were prepared by a thermally induced phase separation. The microsphere formation occurred by the nucleation and growth mechanism in the metastable region. The diluent used was toluene. The microsphere formation and growth was followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by SEM observation and particle size analyzer, became broader when the polymer concentration was higher, the content of vinyl acetate in EVA copolymer was higher, and the cooling rate of EVA copolymer solution was lower.