• Textile Coloration and Finishing
• /
• v.19 no.1 s.92
• /
• pp.12-16
• /
• 2007

Exhaustion increase using cationic dyes on polyamide fibers are not easy work due to the limited amounts of the functional end groups(-COOH) in the substrates. Therefore, to enhance dye exhaustion, polyamide fibers are required to be modified onto desired surface properties of the fibers using anionic bridging agent. In this study, synthetic tanning agent for pre-treatment finishing and cationic dye(berberine chloride) for dyeing of polyamide fibers were used. For surface modification, polyamide fibers were pre-treated with synthetic tanning agent at various concentrations and temperatures. The increased concentration and temperatures of synthetic tanning agents had resulted in exhaustion increase. The modified polyamide substrates skewed increased cationic dyeing exhaustions and the corresponding dyeing results from treated samples represented higher exhaustion properties than those of non-treated counterpart. The increased dyeing effects of cationic dye can be attributed to the supplied ionic interaction and electrostatic attraction sites on the surface of polyamide substrates.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.53-54
• /
• 2006

Recently with increasing interest in the operation of life cycle, building remodeling business is spreading like a fashion. Keeping pace with the trend, the present project carried out the remodeling of an existing neighborhood facility into a religious facility based on the concepts of remodeling, reform and renovation. Basic requirements were overcoming spatial limitations, solving structural problems, meeting various functional needs, and securing a spatial size, and the project designed the interior of the building according to these requirements suggested by the owner. To overcome the low floor height of the existing space, the main sanctuary on the 1st floor had the ceiling in the form of a slant and installed indirect lighting into the resulting gaps, maximizing the depth and width of the space visually. The subsidiary sanctuary on the first basement was finished with red bricks, forming an arch using the bricks, to create religious atmosphere. However, considering the low floor height as in the 1st floor and the ceiling even lowered by the arch structure, the arch was formed threefold and the radius of the curvature of the arch was enlarged to secure a spacious feeling. The outer appearance was finished with granite on existing structure to save the cost of construction. In addition to the use of the finishing material, the structure of the arch and the frame of the opening part and the finishing of the walls were expressed with uneven surface in order to avoid the plainness of the appearance.

• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.1-9
• /
• 1997

This paper was carried out to introduce flame retardant and antibiotic properties to polyester(PET) and polyester/cotton(P/C) blend fabrics. PET and P/C blend fabrics were treated by a paddry-cure method in the aqueous solutions of the finishing agents(JA 6034, JA 6050, DC-5700). The corona discharge technique was applied to increase the polar group of the polymer surface. The characteristics of the treated fabric were investigated by means of scanning electron microscope (SEM) and electron spectroscopy for chemical analysis(ESCA), and water penetration time, limiting Oxygen index(LOI), and K/S value were also measured. Wettability of the fabrics was increased considerably with the corona discharge treatment. ESCA was used to elucidate the surface chemical composition of the fabrics treated with the corona discharge. Relative Ols intensity increased and oxygen was incorporated in the form of -C-O-, -C=O, and O=C-O on the polymer surface. The current study indicated that corona discharge treatment was effective for modifying the polymer surface.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.51-56
• /
• 2020

This study aims to pursue the multi-functional textile finishing method to detoxify chemical warfare agent by simply treating the well-known antimicrobial agent, chitosan, to cotton fabric. For this purpose, DFP(diisopropylfluorophosphate) was sele cted as a chemical warfare agent simulant and cotton fabric was treated with 0.5, 1.0, and 2wt% chitosan solution in 1wt% acetic acid. DFP decontamination properties of the chitosan treated cotton fabrics were evaluated and compared with the untreated cotton fabric. The chitosan treated cotton fabrics showed better DFP decontamination than the untreated cotton. Decontamination properties of the chitosan treated cotton fabrics improved with the increased chitosan solution used. Especially, the cotton fabrics treated with 2wt% chitosan solution showed 5 times more DFP decontamina tion than the untreated cotton fabrics. This suggested that the chitosan treated fabric has potential to be used as a material for protective clothing with chemical warfare agent detoxifying and antimicrobial properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.67-71
• /
• 2000

The history of the paper industry has shown a strong technological evolution which has been an essential factor in achieving low cost, high quality paper products and in sustaining the strength of the industry. In the last decades paper machine development has been rapid. This has helped to establish paper as a "low cost" material. In future, the pressure from the competing media will only accelerate the technological efforts to improve cost and functional'||'&'||'not;ity of paper. In addition, in the future, technological advances will be combined with innovation in busi'||'&'||'not;ness concepts. Certain production methods are likely to be developed which will distribute current process stages outside the paper mill. Papermakers can begin to reduce their invest'||'&'||'not;ment risk by subcontracting large-scale base paper production but taking responsibility for the higher value finishing process stages. Finishing will be more closely integrated with the final use. The role of technology supplier to the paper industry will naturally evolve to reflect all these changes. Metso is already actively collaborating downstream in the different paper-related business chains. This collaboration will be crucial for implementation of new business and technology innovations in P'||'&'||'P industry and Metso will certainly benefit from its catalyst role in this transition.

• Textile Coloration and Finishing
• /
• v.10 no.3
• /
• pp.43-49
• /
• 1998

Polyvinyl chloride (PVC) sheets were treated with corona discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PVC surfaces were subsequently used as initiators for the graft polymerization of acrylic acid or acrylamide in an aqueous solution. Introduction of acrylic acid and acrylamide on the PVC sheet could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. The water contact angle$(90^\circ)$ of PVC sheet was constant, irrespective of time, while corona-treated and functional monomer-grafted PVCs were slowly increased with time, showing the rearrangement of surface polar groups in air condition. The water contact angle of PVC sheet$(90^\circ)$ was decreased by corona treatment$(78^\circ)$, and further decreased by the grafting of acrylic acid$(55^\circ)$ and acrylamide$(56^\circ)$ , indicating increased hydrophilicity of the modified surfaces. The half-life periods of surface voltage on acrylic acid- (62 sec) and acrylamide-grafted PVC (147sec) were significantly decreased when compared to those on PVC (3,115 sec) and corona-treated PVC (463sec). These results mean that acrylic acid- and acrylamide-grafted PVCs could be used as the antistatic sheets.

• Journal of Korean Traditional Oncology
• /
• v.27 no.1
• /
• pp.37-48
• /
• 2022

Objective: Insomnia is a very common symptom and has a great effect on the quality of life in cancer patients. This study was conducted to identify the effects of the aroma therapy on insomnia in cancer patients. Methods: The study was performed with one group in before-after test design. The subjects were 15 cancer patients with insomnia selected by convenience sampling in Daegu. The aroma therapy consists of 10-minute sessions twice a week over 6 weeks. The PSQI (Pittsburgh Sleep Quality Index), ISI (Insomnia Severity Index) were measured at baseline and at 3 and 6 weeks, after 6 weeks after finishing treatment. STAI (State-Trait Anxiety Inventory), FACT-G (Functional Assessment Cancer Therapy-General), HRV (Heart Rate Variability) were measured at baseline, post-treatment and after 6 weeks after finishing treatments. Results: Fifteen patients (mean age 50.93 ± 7.29 years), with breast, ovarian or gastric cancer, participated this study. At post-treatment, PSQI (from 14.18 ± 2.64 to 6.18 ± 3.03), ISI (from 19.00 ± 3.19 to 8.18 ± 5.14), FACT-G (from 55.65 ± 11.20 to 66.91 ± 12.33), and STAI (from 40.36 ± 8.10 to 34.73 ± 9.81, from 45.64 ± 6.07 to 39.73 ± 9.37) scores improved significantly over baseline(p<0.001). Conclusion: Aroma therapy improved insomnia, anxiety and quality of life on cancer patients.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.138-139
• /
• 2020

With the rapid progress of industrialization, indoor air quality is a very important factor for modern people who spend most of their day indoors. The recent issue of fine dust and radon on the portal site's popularity search shows that interest in indoor air quality has increased. Fine dust causes respiratory diseases, and radon causes severe lung cancer. The new material was tested using plant activated carbon, palm activated carbon and bamboo activated carbon. Both palm activated carbon and bamboo activated carbon are porous materials and generate smooth physical adsorption. As a result of the experiment, both the activated carbon tends to gradually decrease in strength and fluidity as the replacement ratio increases. The reason for this is that both activated carbons have the property of absorbing moisture, so it is judged that the strength is lowered by absorbing moisture necessary for curing. In the case of fluidity, it is judged that the fluidity is reduced by absorbing the moisture required for the flow. In the future, if the problem of the color of the finished cured body is compensated, it will be possible to manufacture a functional finishing board to replace the existing interior finishing material.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.75-82
• /
• 2008

The optimum extraction conditions of green tea used for a bath were investigated for application to textiles. The stability of the extracts and content of active ingredients were analyzed as well. The extraction was more effective in water and methanol than in ethanol. The optimum extraction temperature was determined as $80^{\circ}C$ in water and $60^{\circ}C$ in methanol. The solid extracts were obtained about 7% in water and 9% in methanol on the weight of dry green tea. The extracts were more stable in acid and neutral conditions than in alkaline region. From the analysis of contents of active ingredients, about 20% of effective catechins was appeared to be contained in the extract solid, which was thought to be available for application to textiles.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.231-238
• /
• 2017

There are many kinds of elements and processes for the development of high quality bedding products like fiber, high-temperature heat treatment, dyeing process, tenter drying with softening agent and multiple final finishing. Especially we examined the mechanical characteristic properties of fabrics according to different yarn types. The critical physical properties of the yarn consisting the pile knitted fabrics were obtained for the development of the hi-grade bedding items. The material property and the exhaustion behaviour of the developed pile knitted fabrics composing of different yarns were measured and observed. The physical properties of the developed fabric were evaluated through the material property analysis of the yarn, the physical nature of the pile knitted fabrics and the data of the exhaustion performance; tensile strength, tensile elongation, tearing strength, cross section of yarn types, dyeing properties etc. And then high-class of bedding items were knitted using the double raschel machine to make the pile knitted fabrics.