• 한국전자거래학회지
• /
• 제24권3호
• /
• pp.53-71
• /
• 2019

소프트웨어 시스템이 복잡하고 대규모화 되어감에 따라 새로운 기능을 제공하기 위해 소프트웨어 컴포넌트 또는 모듈을 재사용하는 방법을 요구하고 있다. 본 논문에서는 서비스 제공자와 서비스 사용자에게 SOA와 MSPL을 결합하여 가변성 서비스를 제공하고 재사용하여 웹 시스템 개발 방법을 제시하였다. 제시한 방법은 서비스 제공자 관점에서, 재사용 가능한 가변성 서비스를 휘처 식별 가이드라인을 적용하여 신택스 기반, 기능기반과 행위기반 방법으로 휘처로 식별하고 구현하여 재사용 자산으로 관리하였다. 그리고 사용자 관점에서 서비스를 구조적으로 조합하고 재구성하는 방법으로서 워크플로우를 모델링하여 서비스를 구성하여 웹 시스템을 구현하였다. 본 논문에서 구축한 웹 시스템의 재사용을 기능점수로 측정한 결과 재사용의 증가와 유사프로젝트에 적용해 비용 절감 효과를 검증하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.16-20
• /
• 2006

In this paper, we investigated the effects of short-term oxygen plasma treatment of semiconducting silicone layer to improve interfacial performances in joints prepared with a insulating silicone materials. Surface characterizations were assessed using contact angle measurement and x-ray photoelectron spectroscopy (XPS), and then adhesion level and electrical performance were evaluated through T-peel tests and electrical breakdown voltage tests of treated semi-conductive and insulating joints. Plasma exposure mainly increased the polar component of surface energy from $0.21\;dyne/cm^2$ to $47\;dyne/cm^2$ with increasing plasma treatment time and then leveled off. Based on XPS analysis, the surface modification can be mainly ascribed to the creation of chemically active functional groups such as C-O, C=O and COH on semi-conductive silicone surface. This oxidized rubber layer is inorganic silica-like structure of Si bound with three to four oxygen atoms ($SiO_x,\;x=3{\sim}4$). The oxygen plasma treatment produces an increase in joint strength that is maximum for 10 min treatment. However, due to brittle property of this oxidized layer, the highly oxidized layer from too much extended treatment could be act as a weak point, decreasing the adhesion strength. In addition, electrical breakdown level of joints with adequate plasma treatment was increased by about $10\;\%$ with model samples of joints prepared with a semi-conducting/ insulating silicone polymer after applied to interface.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1777-1783
• /
• 2013

This study aims to implement an instrumentation system measuring and analysing real-time data of information flow between respective subunits composing train control system as the performance evaluation method for wireless communication based urban railway train control system under development for a Korean model. It analyses system functional requirements regarding subsystems composing wireless communication based train control system and test items for functions presented in each specification and examines data and measurement point for measuring according to test items in order to implement an instrumentation system. And, it clearly defines requirements of an instrumentation system to avoid malfunction or error in operation of train control system. It reviews data processing method and display method for effective analysis of data flow between respective subunits with measured data, designs and makes an instrumentation system. Ultimately, it applies to a performance test of train control system and makes sure an instrumentation system in normal working order.

• Reproductive and Developmental Biology
• /
• 제41권2호
• /
• pp.41-50
• /
• 2017

Until today, success in germline cells and tissue cryopreservation is limited mainly due to the poor understanding of the complex physiological processes can lead to cell damage during cryopreservation. Germline cells, from both male and female, have unique ability to differentiate into one or more cell lines and thus it becomes a crucial point to store them in subzero temperature with the minimal damage of their functional properties and maximum recovery of unchanged and viable cells when thawed. In the past three decades, a vast research has been performed using various different animal models which in fact have led to development of new methodologies and optimization of older one. However, successful use of animal model has provided the opportunity in research with human germline cells and tissues preservation, but not in all the cases. Therefore, the use of new cryo-protective chemicals and modified protocols have been often found in different groups of researchers based on the types, physical structures, utility and animal species of the specimens to be cryopreserved. This review discusses about the basics of different types of cryopreservation methodologies and commonly used optimized protocols and cryoprotectants for germline cells and tissues preservation.

• 한국치위생학회지
• /
• 제16권5호
• /
• pp.759-766
• /
• 2016

Objectives: The purpose of the study was to investigate the impact of dental fear on the oral health related quality of life in teenagers. Methods: A self-reported questionnaire by Likert 5 point scale was completed by 900 high school students in J area from March 10 to April 20, 2014. The questionnaire consisted of general characteristics of the subjects, dental fear survey, and oral health related quality of life. Data were analyzed by t-test and One-way ANOVA using SPSS 12.0 program. Results: Oral symptoms had no significant differences in mother's education and family economic status. Emotional well-being factors had no significant difference in age, religion, school performance, and family economic strength. Dental fear was closely related to emotional well-being, Oral symptoms, social stabilities, functional limit and mental stabilities. Explanation power of the model was 29.1%. Conclusions: It is very important to explain the dental fear procedure to teenagrers before dental surgery and this will enhance the oral health related quality of life in teenagers.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.780-790
• /
• 1996

The endodontically treated tooth is generally restored with post and core, owing to the brittleness and the loss of large amount of tooth structure. Although there have been lots of studies about the endodontically treated teeth, the three-dimensional quantitative studies about the stress distribution of them are in rare cases. In this study, it was assumed that the coronal portion of the upper incisor had extensively damaged. After the root canal therapy it was post cored, and restored with PFG crown. The three-dimensional model, in which the root was supported with a normal alveolar bone, was constructed. Force was applied to the centric stop point with the angle of 135 degrees to the long axis of the tooth. Force was assumed to be 250N as functional maximum bite force of upper central incisors. The results analyzed with three-dimensional finite element method were as follows : 1. Stress was concentrated on the middle portion of the labial side dentin and the apical portion of the dentin. 2. Stress in the post was more concentrated on the post apex. 3. The displacement of the post at the post-cement interface was almost symmetrical la-bio-lingually. 4. It assumed that restoring extensively damaged tooth with a post-core and PFG crown is an adequate method of restoration.

• 대한인간공학회지
• /
• 제30권1호
• /
• pp.41-53
• /
• 2011

Objective: The purpose of this paper is to introduce new research trends of human error and accident modeling and to suggest future promising research directions in those areas. Background: Various methods and techniques have been developed to understand the nature of human errors, to classify them, to analyze their causes, to prevent their negative effects, and to use their concepts during design process. However, it has been reported that they are impractical and ineffective for modern complex systems, and new research approaches are needed to secure the safety of those systems. Method: Six different perspectives to study human error and system safety are explained, and then seven recent research trends are introduced in relation to the six perspectives. The implications of the new research trends and viable research directions based on them are discussed from a cognitive systems engineering point of view. Results: Traditional methods for analyzing human errors and identifying causes of accidents have critical limitations in complex systems, and recent research trends seem to provide some insights and clues for overcoming them. Conclusion: Recent research trends of human error and accident modeling emphasize different concepts and viewpoints, which include systems thinking, sociotechnical perspective, ecological modelling, system resilience, and safety culture. Application: The research topics explained in this paper will help researchers to establish future research programmes.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3521-3524
• /
• 2010

MTH1880 is a hypothetical protein derived from Methanobacterium thermoautotrophicum, thermophilic methanogen. The solution structure determined by NMR spectroscopy showed that it has a novel $\alpha+\beta$-fold with a highly acidic ligand binding pocket. Since MTH1880 maintains its ultra-stable structural characteristics at both high temperature and pressure, it has been considered as an excellent model for studying protein folding. To initiate the structural and folding study of MTH1880 in proving its unusual stability, we performed the site directed mutagenesis and biochemical analysis of MTH1880 mutants. Data from circular dichroism and NMR spectroscopy suggest that the point mutations perturbed the structural stability of protein even though the secondary structure is retained. This study will provide the useful information in understanding the role of participating residues during folding-unfolding process and our result will be used in designing further folding experiments for hyper-thermopile proteins like MTH1880.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.121-127
• /
• 2003

Wave overtopping is one of the most important hydraulic responses of breakwater because it significantly affects its functional efficiency, the safety of transit and mooring on the rear side, wave transmission in the sheltered area, rear side armor stones and to some extent, the structural safety itself. In this study, hydraulic model tests has been carried out to investigate the influence of berm's size on overtopping rate by maximum overtopping rate and mean overtopping rate. The hydrodynamic characteristics of berm breakwater by the overtopping rate can be summarized as follows: 1. It is better to use maximum overtopping rate than to use mean overtopping rate for design of coastal structures in the point of view of stability. 2. When construct berm to decrease energy of waves that it was needed to make breaking conditions of wave on the berm. 3. Under the relative length of berm was over 0.13 overtopping rate was significantly decreased. 4. Overtopping rate affected significantly by the relative length of yhe berm than height of the berm.

• 대한한의학원전학회지
• /
• 제21권1호
• /
• pp.153-162
• /
• 2008

Three Eum and Three Yang[三陰三陽] is a way of studying the changing of nature from a Eum(陰) and Yang(陽) point of view, Juhakhae(周學海) divides this into two dimensions. The first is the concept of dividing the exterior part of the body excluding the organ into 6 divisions as Eumyang(陰陽) of front and rear characteristic. The second is the concept of dividing the systematic bio-activity of the central organ into another 6 dimensions. The former concept is illustrated in the body as a certain meridian controlling a certain field of the body, while the latter is presented as a certain organ performing an activity of Gi(氣). Three Eum and Three Yang[三陰三陽] is not based on fixed substances. but it is a thought process model of observing the structural-functional changes of the body in disease state. Therefore, by understanding Three Eum and Three Yang[三陰三陽] of field and activity of Gi(氣) respectively and comprehensively putting these into practice, we will be able to approach the essence of the disease state in a more precise manner.