• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.944-948
• /
• 2009

휴대전화는 현재 가장 사적인 이동통신 수단으로 범용인증가입모듈의 보급과 함께 그 개인화 특성이 극대화 되고 있다. 본 연구에서는 휴대전화의 기능 모형을 도출하고 이를 기능 관계 모델을 사용하여 휴대전화의 개인화 기능 관계 모델을 제시하고, 그 작업을 분석한다. 제품의 기능 사이의 관계를 보여줄 수 있는 기능 관계 모델을 도출하기 위해 기능, 작업, 작업의 흐름, 작업의 목적, 기능범주, 기능범주와 기능 간의 영향 등을 사용하였으며, 이를 사용하여 최신 휴대전화의 기능 관계 모델을 작성하였다. 최근 휴대전화 3 개 모델로 만든 기능 관계 모델은 320 여개의 기능과 21 개의 기능 범주가 도출된 기능 모형을 기반으로 만들어졌다. 이를 개인화 기능을 중심으로 기능 관계를 모델링하게 되면 개인화 기능을 위한 정보가 저장되고 사용되는 내/외장 메모리가 모델의 중심에 놓이게 되는 기능 관계 모델이 도출되고, 저장과 조회, 연동 및 검색 등이 주요 작업이 된다, 휴대전화에서 개인화 기능 강화를 위해서는 각 기능간의 관계에 해당하는 작업을 강화하는 것이 주요하다.

• 한국농공학회지
• /
• 제26권3호
• /
• pp.90-98
• /
• 1984

In this paper, the anthor made a basic study of the storage function model and examined several constants in applying the storage function model to flood run-off analysis by dealing with the data in the Supyung and Hoyng Syung watershed, the applicabilities of the storage function model are examined by searching this optimum model parameters in two watersheds. The results are summarized as follows, 1) The optimum values of the exponential constants, P, in the storage function model showed to be 0.77 to 0.87 in two watersheds observed, therefore it was confirmed that the storage fumction model was approaching to the surface runoff model. 2) It was confirmed that the interval of variation of the storage constant, K, Showed to be larger than that of the exponential constant, p. 3) Relative erros in the discharge obtained by using the storage function model and the SDFP mothod showed to be 20 and 17 percent respectively to the observed discharge, therefore it was confirmed that the applicability of the storage function model using the SDFP method are excellent for runoff analysis. 4) A simple method is proposed for estimating the lag time in the storage function model.

• 경영과학
• /
• 제14권1호
• /
• pp.131-149
• /
• 1997

Software cost estimation is an important both for buyers and sellers(developers). We reviewed domestic and foreign researches and practices on software cost estimation with function point method comprehensively, In this paper, we derived four promising alternative function point models. They are an IFPUG(International Function Point User Group)-based model(Model I), a shorthand model for client/sever software systems(Model II), a data-oricnted model for relatively large software projects(Model III), and a general- purpose function point model for non business application softwares as well as business applications(Model IV). Empirical data shows that Model I, II, and IV are very useful function point models. In particular, model II and IV look very useful models since they are concise and accurate. These models can be incorporated in a new improved guideline for software cost estimation. General opinion survey shows that Model I, II and IV are preferable. There are no significant differences in preference between buyers and sellers. The survey also shows that users think function point method is better than step(line of code)-oriented cost estimation methods in many ways including objectivity and estimation accuracy.

• 디지털산업정보학회논문지
• /
• 제7권4호
• /
• pp.7-14
• /
• 2011

Infinite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rate per fault (hazard function). This infinite non-homogeneous Poisson process is model which reflects the possibility of introducing new faults when correcting or modifying the software. In this paper, polynomial hazard function have been proposed, which can efficiency application for software reliability. Algorithm for estimating the parameters used to maximum likelihood estimator and bisection method. Model selection based on mean square error and the coefficient of determination for the sake of efficient model were employed. In numerical example, log power time model of the existing model in this area and the polynomial hazard function model were compared using failure interval time. Because polynomial hazard function model is more efficient in terms of reliability, polynomial hazard function model as an alternative to the existing model also were able to confirm that can use in this area.

• 경영과학
• /
• 제20권2호
• /
• pp.179-196
• /
• 2003

Function point model is the international standard method to measure the software size which is one of the most important factors to determine the software development cost. Function point model can successfully be applied only when the detailed specification of users' requirements is available. In the domestic public sector, however, the budgeting for software projects is carried out before the requirements of softwares ere specified in detail. Therefore, an efficient function point estimation method is required to apply function point model at the early stage of software development projects. The purpose of this paper is to compare various function point estimation methods and analyse their accuracies in domestic software projects. We consider four methods : NESMA model, ISBSG model, the simplified function point model and the backfiring method. The methods are applied to about one hundred of domestic projects, and their estimation errors are compared. The results can used as a criterion to select an adequate estimation model for function point counts.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.349-354
• /
• 1999

The transfer function was introduced to establish the prediction method for the DO concentration at the intaking point of Kongju Water Works System. In the mose cases we analyze a single time series without explicitly using information contained in the related time series. In many forecasting situations, other events will systematically influence the series to be forecasted(the dependent variables), and therefore, there is need to go beyond a univariate forecasting model. Thus, we must bulid a forecasting model that incorporates more than one time series and introduces explicitly the dynamic characteristics of the system. Such a model is called a multiple time series model or transfer function model. The purpose of this study is to develop the stochastic stream water quality model for the intaking station of Kongju city waterworks in Keum river system. The performance of the multiplicative ARIMA model and the transfer function noise model were examined through comparisons between the historical and generated monthly dissolved oxygen series. The result reveal that the transfer function noise model lead to the improved accuracy.

• 대한수학회논문집
• /
• 제33권3호
• /
• pp.973-983
• /
• 2018

Fuzzy linear regression model has been widely studied with many successful applications but there have been only a few studies on the fuzzy regression model with monotonic response function as a generalization of the linear response function. In this paper, we propose the fuzzy regression model with the monotonic response function and the algorithm to construct the proposed model by using ${\alpha}-level$ set of fuzzy number and the resolution identity theorem. To estimate parameters of the proposed model, the least squares (LS) method and the least absolute deviation (LAD) method have been used in this paper. In addition, to evaluate the performance of the proposed model, two performance measures of goodness of fit are introduced. The numerical examples indicate that the fuzzy regression model with the monotonic response function is preferable to the fuzzy linear regression model when the fuzzy data represent the non-linear pattern.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.1007-1015
• /
• 2003

In this paper we introduced a new score generating function for the rank dispersion function in a general linear model. Based on the new score function, we derived the null asymptotic theory of the rank-based hypothesis testing in a linear model. In essence we showed that several rank test statistics, which are primarily focused on our new score generating function and new dispersion function, are mainly distribution free and asymptotically converges to a chi-square distribution.

• 정보처리학회논문지D
• /
• 제15D권2호
• /
• pp.207-212
• /
• 2008

본 논문은 소프트웨어 비용추정 모델의 적합성을 평가하고, 가장 적합한 모델을 제시하였다. 먼저, 해당 모델의 함수를 변수변환시켜 선형식으로 만든다. 다음으로 실제 개발 소프트웨어의 비용 데이터가 모델의 선형식에 얼마나 적합한지로 모델의 성능을 평가한다. 모델 성능평가에는 절대오차 대신 상대오차 개념인 MMRE를 적용하였다. 기존의 소프트웨어 비용추정 모델은 Weibull, Gamma와 Rayleigh 함수를 따르고 있다. 본 논문에서는 성장곡선의 일종인 Gompertz 곡선 모델을 제안하였다. 추가로 다른 성장곡선들도 적합성을 검증하였다. 모델 성능평가 결과 Gompertz 성장곡선이 소프트웨어 비용추정 모델로 가장 적합한 성능을 보였다.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.51-58
• /
• 2011

In this paper, a function model of back-to-back PWM converters, based on the switching function, is developed for simplified simulation of power electronic application systems. For the function model, the PWM power switches are represented by dependent power sources. By using the proposed function model, the computer memory and the run time required for the simulation of power circuits can be significantly reduced. It is shown that the simulation results generated from the function models are almost the same as the ones obtained by using the switching power device model.