• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.255-262
• /
• 2013

본 논문에서는 아이소-지오메트릭 기법을 기반으로 민들린 후판에 대한 형상 설계민감도 해석법을 제시하였다. 아이소-지오메트릭 기법은 정확한 기하학적 형상의 표현, 요소 사이의 높은 연속성 등 바람직한 강점들을 가지고 있으며 궁극적으로는 해석해로의 빠른 수렴성과 정확한 설계민감도를 제공한다. 선형 형상함수를 사용하는 유한요소법과는 달리 아이소-지오메트릭 기법에서는 높은 차수의 NURBS 기저함수를 활용하여 CAD 형상의 법선벡터와 곡률을 정확하게 고려한다. 전단 잠김(Shear locking) 현상을 극복하기 위해서 선택적 감소적분(Selective reduced integration) 기법을 사용하였다. 이 간단한 방법은 복잡한 정식화 과정 없이 정확한 아이소-지오메트릭 형상 설계민감도 해석을 수행한다. 굽힘 문제에 대한 수치예제를 통하여 제안된 아이소-지오메트릭 해석과 유한요소 해석을 비교하였으며, 유한차분 설계민감도와 비교하여 아이소-지오메트릭 형상 설계민감도는 매우 정확함을 확인하였다.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.311-319
• /
• 2019

This paper proposes an acceleration of the multi-level fast multipole algorithm(MLFMA) by using a double interpolation method. The MLFMA has been primarily used to conduct scattering analysis of electrically large targets, e.g. stealth aircraft. In the MLFMA, radiation functions of each basis functions are first precomputed, and then aggregated. After transfer calculations for the aggregations, each interaction is disaggregated, and then received in the testing function. The key idea of the proposed method is to decrease the sampling rates of the radiation and receiving functions. The computational complexity of the unit sphere integration in terms of the testing functions is thus highly alleviated. The remaining insufficient sampling rate is then complemented by using additional interpolation. We demonstrate the performance of the proposed method through radar cross-section(RCS) calculations for realistic aircraft.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3123-3123
• /
• 2001

Near infrared (NIR) spectroscopy has become a widely used method in food and beverage analysis because of its speed, accuracy and the simplicity of sample preparation. One of the basic requirements of NIR instruments is a wide dynamic range if weak, or small, absorption changes or concentrations are to be measured. Thus the instrument must be sufficiently luminous, and efficient, to enable measurements to be made in a reasonably short time, as for some applications (e.g. sorting) short response times are essential. Diode lasers function the same way as lasers but linewidths are not as narrow as typical lasers. In this work an array of seven laser diodes (in the range of 750-1100 nm) with energy outputs of around hundred milliwatts each were combined with a fast diode array spectrometer (400-1100 nm, 1024 pixels, integration time from 3 ms) as detector. Measurements in transmission mode were performed in solutions of sugars in aqueous solutions and in deuteriumoxide. The feasibility of non-destructive measurements in transmission mode was investigated for different fruits and vegetables.

• 한국전자통신학회논문지
• /
• 제10권3호
• /
• pp.357-364
• /
• 2015

본 연구에서는 아날로그 메모리를 이용한 DC-DC 컨버터 제어기를 설계하였다. 이 방식은 기존의 폐루프 방식의 컨버터 제어기가 안고 있는 안정도 문제를 근본적으로 해결하는데 기여하게 될 것이다. 본 연구에서 아날로그 메모리는 컨버터의 출력과 이에 대응되는 최적의 시비율 판단을 위한 연상메모리를 구현하는데 이용된다. 메모리의 읽기 동작은 연상메모리의 최적 함수 선택을 위하여 절대값 회로와 승자전취 메커니즘 회로가 사용되며, 병렬의 고속 쓰기와 읽기 동작뿐만 아니라 고집적을 가능하게 하는 시스템 구성이 제안된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권12호
• /
• pp.2294-2314
• /
• 2011

The key issue in providing fast and reliable access on cloud services is the effective management of resources in a cloud system. However, the high variation in cloud service access rates affects the system performance considerably when there are no default routines to handle this type of occurrence. Adaptive techniques are used in resource management to support robust systems and maintain well-balanced loads within the servers. This paper presents an adaptive resource management for cloud systems which supports the integration of intelligent methods to promote quality of service (QoS) in provisioning of cloud services. A technique of dynamically assigning cloud services to a group of cloud servers is proposed for the adaptive resource management. Initially, cloud services are collected based on the excess cloud services load and then these are deployed to the assigned cloud servers. The assignment function uses the proposed proportional ordering which efficiently assigns cloud services based on its resource consumption. The difference in resource consumption rate in all nodes is analyzed periodically which decides the execution of service assignment. Performance evaluation showed that the proposed dynamic service assignment (DSA) performed best in throughput performance compared to other resource allocation algorithms.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.959-964
• /
• 2010

In this work, equilibrium molecular dynamics (MD) simulations in a microcanonical ensemble are performed to evaluate the friction coefficient of a Brownian particle (BP) in a Lennard-Jones (LJ) solvent. The friction coefficients are determined from the time dependent friction coefficients and the momentum autocorrelation functions of the BP with its infinite mass at various ratios of LJ size parameters of the BP and solvent, ${\sigma}_B/{\sigma}_s$. The determination of the friction coefficients from the decay rates of the momentum autocorrelation functions and from the slopes of the time dependent friction coefficients is difficult due to the fast decay rates of the correlation functions in the momentum-conserved MD simulation and due to the scaling of the slope as 1/N (N: the number of the solvent particle), respectively. On the other hand, the friction coefficient can be determined correctly from the time dependent friction coefficient by measuring the extrapolation of its long time decay to t=0 and also from the decay rate of the momentum autocorrelation function, which is obtained by time integration of the time dependent friction coefficient. It is found that while the friction coefficient increases quadratically with the ratio of ${\sigma}_B/{\sigma}_s$ for all ${\sigma}_B$, for a given ${\sigma}_s$ the friction coefficient increases linearly with ${\sigma}_B$.

• 지구물리
• /
• 제3권3호
• /
• pp.161-174
• /
• 2000

베이지안 역산(Bayesian inversion)은 불충분한 자료를 가지고 지하구조를 추정해야 하는 지구물리자료의 해석에 있어서 안정적이고 신뢰를 줄 수 있는 방법 중의 하나이다. 관측 자료가 측정 과정부터 불확실성을 함유하고 있으며, 역산에 이용되는 이론 자료 또한 모델의 매개변수화에 따른 각종 불확실성을 포함하고 있다. 따라서 지구물리 자료의 역산은 확률적으로 접근하는 것이 가장 바람직하며 베이지안 역산은 이에 대한 처리뿐만 아니라, 추정에 대한 신뢰도와 불확실성에 대한 이론적 근거를 제공한다. 그러나 대부분의 베이지안 역산이 고차원의 적분을 필요로 하므로 몬테 카를로 방법과 같은 대규모의 계산이 요구되는 방법에 의해 사후 확률분포가 구해지는 경우가 많다. 이는 특히 지구물리 자료와 같이 고도의 비선형 자료에 대하여 매우 적합한 접근 방법이기는 하지만, 점차 현장화, 고속화되어가는 자료의 해석 경향에 맞추어 간략하게 사후 확률분포를 근사한 수 있는 기법의 연구 또한 필요하다. 따라서 이 연구에서는 관측자료와 사전 확률분포가 정규분포에 의해 근사 될 수 있는 지구물리자료에 대한 베이지안 역산에 대해 논의 하고자 한다. 사전 확률분포의 작성을 위해 지구통계학적 기법이 이용되었으며, 관측자료의 통계적 불화실성을 추정하기 위해 교차 검사(cross-validation) 방법을 이용하여 공분산(covariance)을 유도하고 그것에 의한 우도 함수(likelihood function)를 작성하였다. 베이지안 해석을 위해 두 확률분포를 곱하여 근사적인 사후 확률분포를 얻을 수 있었으며, 이에 대해 최적화(optimization) 기법을 이용하여 최대 사후 확률(Maximum a Posterior)을 따르는 지하 구조를 얻을 수 있었다. 또한 사후 확률 분포의 공분산 항을 이용하여 지하 비저항 구조를 시뮬레이션 하여 불확실성분석을 수행하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.361.1-361.1
• /
• 2016

Due to their high sensitivity, fast response, small energy consumption and ease of integration, nanoelectromechanical systems (NEMS) have attracted much interest in various applications such as high speed memory devices, energy harvesting devices, frequency tunable RF receivers, and ultra sensitive mass sensors. Since the device performance of NEMS is closely related with the mechanical and flexural properties of the material in NEMS, analysis of the mechanical and flexural properties such as intrinsic tensile stress and Young's modulus is a crucial factor for designing the NEMS structures. In the present work, the intrinsic mechanical properties of highly stressed silicon nitride (SiN) beams are investigated as a function of the beam length using two different techniques: (i) dynamic flexural measurement using optical interferometry and (ii) quasi-static flexural measurement using atomic force microscopy. The reliability of the results is analysed by comparing the results from the two different measurement techniques. In addition, the mass density, Young's modulus and internal stress of the SiN beams are estimated by combining the techniques, and the prospect of SiN based NEMS for application in high sensitive mass sensors is discussed.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}