• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.485-497
• /
• 2013

The factor of safety is the most common measure of the safety margin for slopes. When the traditionally defined factor is used in kinematic approach of limit analysis, calculations can become elaborate, and iterative methods have to be used. To avoid this inconvenience, the safety factor was defined in terms of the work rates that are part of the work balance equation used in limit analysis. It was demonstrated for two simple slopes that the safety factors calculated according to the new definition fall close to those calculated using the traditional definition. Statistical analysis was carried out to find out whether, given normal distribution of the strength parameters, the distribution of the safety factor can be approximated with a well-defined probability density function. Knowing this function would make it convenient to calculate the probability of failure. The results indicated that the normal distribution could be used for low internal friction angle (up to about $16^{\circ}$) and the Johnson distribution could be used for larger angles ${\phi}$. The data limited to two simple slopes, however, does not allow assuming these distributions a priori for other slopes.

• 동의생리병리학회지
• /
• 제20권5호
• /
• pp.1111-1116
• /
• 2006

Medical science is an area of study that focuses on maintaining health and treating disease. However, modern medicine focuses on treating disease and neglects methodology of maintaining health. Although the definition of heal this defined by the World Health Organization (WHO) and as the concept of harmonizing Yin and Yang in Korean medicine, there is no specific details regarding the definition. Thus, the following conclusion was obtained after the concept of health is viewed through Yin-Yang(陰陽), Vital Essence(精), Qi(氣), and Healthy Person(平人). Although Yin and Yang have opposite properties, they work very closely, maintaining the overall balance and harmony. Secondly, Vin and Yang would each function by the effects of one another, and the body could maintain normal physiological activities through this function. Thirdly, it maintains normal physiological state through the ascending Kidney-Water and descending Heart-Yang(水升火降). Fourthly, Vital Essence is divided into the congenital Essence(先天之精) and the acquired Essence(後天之精) in which the former is related with reproduction and the latter, nourishing. Fifthly, Qi is resistant to pathogens and related with the physique so that Qi and physique should be balanced. Sixthly, Healthy Person is the state where the exchange of Qi-Blood is active.

• 시스템엔지니어링학술지
• /
• 제18권1호
• /
• pp.46-57
• /
• 2022

In this paper, we proposed the DFMEA Implementation Method for safety design of Weapon System. First, we presented the process for DFMEA. And then, the case analysis of OOO missile was performed in accordance with the process presented. After defining the system requirements of OOO missile, failure definition scoring criteria was set. In order to clarify the definition of failure, the failure was classified into safety, reliability, maintainability and others. After performing the function analysis, the relationship matrix analysis was performed to identify the failure mode according to the function without omission. After clarifying the failure classification, mode of failure, cause of failure and effect were analyzed to calculate the severity, occurrence and detection values. After the action priority was judged, the recommended action according to the failure classification was identified for the determined action priority. The results of this study can be used as a relevant basis for the design reflection and resource re-allocation of stakeholders.

• 간호행정학회지
• /
• 제12권4호
• /
• pp.574-586
• /
• 2006

Purpose: This paper is intended to provide a clauses of scope of nursing practice with nursing act. Method: This was a planning study. The provision of scope of nursing practice is constructed through critical review of literatures and regulations. The validity of the legal definition was tested through expert and staffs in affiliates of Korean Nurses Association review. Result: 'Nursing is an activity that assesses and diagnoses the reaction of an individual, family, and community for health promotion and maintenance, illness prevention and rehabilitation and to provide intervention and evaluate the results. This practices are done through nursing knowledge and skills. The nursing practices include basic nursing services (general hygiene, environment and safety control, emotional and physical comfort, examination and surgery related care, systematic observation and reporting about patients, activity and organ function maintenance), practice of doctor's regimen, consulting and education to patients, reference, collaboration and management with other health personnel, public health activity by regulation. And nursing standards are set by a separate code. Conclusions: The result of this study can be used to offer for nursing act. So, This legal definition will be constantly discussed and extended to reflect actual nursing practice.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3159-3168
• /
• 2014

비점오염원 관리를 위한 독립호우의 결정은 월류수 처리시설의 설계에서 필수적이다. 비점오염원의 관리를 위해서는 총량을 결정해야만 하는데 이를 위해서는 결정된 독립호우에 의해 1회 평균강우량, 평균강우강도, 평균지속시간 등의 강우특성의 분석이 실시되어야만 한다. 독립호우의 결정은 무강우 지속시간의 산정(Interevent Time Definition, IETD)에 따라 분리할 수 있으며 이를 결정하기 위한 기존의 분석방법에는 자기상관 분석, 변동계수 분석, 연강우 평균발생횟수 분석 등이 있다. 본 연구에서는 기존의 IETD 분석방법에 따라 무강우시간을 산정한 후 방법별 문제점을 고찰하고 새로운 IETD 결정방법으로 지수함수 검정방법을 제안하였다. 또한, 검정방법을 통하여 결과값의 적절성을 검토하였다.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제30권2호
• /
• pp.199-223
• /
• 2016

본 연구의 목적은 중학교 1, 2학년 학생들이 함수 개념을 통합적으로 이해하고 있는지를 알아보는데 있다. 함수 개념의 통합적 이해란 함수에 관한 다양한 상황과 표현을 함수의 정의와 유기적으로 연결하여 이해하는 것을 의미한다. 본 연구를 위하여 청주시에 소재한 A와 B 중학교 1, 2학년 학생 160명을 대상으로 선정하여 함수 개념의 통합적 이해 정도를 조사하였다. 통합적 이해의 관점에서 중학교 교과서와 다른 참고문헌을 참고하여 검사지를 개발한 후 현장 교사들과 전문가의 검토를 받아 수정 보완하였다. 연구 결과는 다음과 같다. 첫째, 함수 상황을 표와 식으로 번역하는 것보다 그래프로 번역하는 것을 어려워하였다. 둘째, 함수 여부의 판단에 대한 정답률은 학생들에게 익숙한 상황에서는 비교적 높았지만, 익숙하지 않은 상황에서는 낮게 나타났다. 셋째, 학년, 함수 상황에 따라 함수 판단에 대한 근거가 차이가 있다. 익숙한 상황에 대해서는 1학년은 정의, 2학년은 식의 관점으로 함수여부를 판단하려는 경향을 보였다. 또한 익숙하지 않은 상황에서는 정의와 식보다는 규칙성과 변화의 관점에서 함수를 판단하려는 경향이 나타났다. 넷째, 다양한 상황이나 표현을 일관되게 정의와 연결시킨 학생은 1학년이 12명(14.6%)이고 2학년은 한 명도 없었다. 즉 대부분의 학생들은 함수 개념을 통합적으로 이해하지 못한 것으로 나타났다.

• 정보학연구
• /
• 제8권3호
• /
• pp.1-10
• /
• 2005

Cosine and Sine function is widely used for the arithmetic, translation, object drawing, Simulation and etc. of Computer Graphics in Natural Science and Engineering. In general, Cordic Algorithm is effective method since it has relatively small size and simple architecture on trigonometric function generation. However profitably it has those merits, the problem of operation speed is occurred. In graphic display system, the operation result of object drawing is quantized and has the condition that is satisfied with rms error less than 1. So in this paper, the proposed generator is composed of partition operation at each ${\pi}/4$ and basic Cosine, Sine function generator in the range of $0{\sim}{\pi}/4$ using the lower order of Tayler's series in an acceptable error range, that enlarge the range of $0{\sim}2{\pi}$ according to a definition of the trigonometric function for the purpose of having a high speed Cosine, Sine function generation. And, division operator using code partition for divisor three is proposed, the proposed function generator has high speed operation, but it has the problems in the other application parts with accurate results, is need to increase the speed of the multiplication.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제57권4호
• /
• pp.477-491
• /
• 2018

In this paper we study in-service teachers' and pre-service teachers' recognition the domain in the problem concerning the continuity of a function. By a questionnaire survey we find out that most of in-service teachers and pre-service teachers are understanding the continuity of a function as explained in high school mathematics textbook, in which the continuity was defined by and focused on comparing the limit with the value of the function. We also notice that this kind of definition for the continuity of a function makes them trouble to figure out whether a function is continuous at an isolated point, and to determine that a given function is continuous on a region by not considering its domain explicitly. Based on these results we made several suggestions to improve for in-service teachers and pre-service teachers to understand the continuity of a function more exactly, including an introduction of a more formal words usage such as 'continuous on a region' in high school classroom.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.76-82
• /
• 2003

This paper establishes some integral equalities formulated by zeros located in the convergence region of a Laplace transformable function. Using the definition of the Laplace transform, it shows that Laplace transformable functions have to satisfy the integral equalities in the time-domain, which can be applied to the understanding of the fundamental limitations on the control system represented by the transfer function. In the unity-feedback control scheme, another integral equality is derived on the output response of the system with open-loop poles located in the convergence region of the output function. From these integral equalities, two sufficient conditions related to undershoot and overshoot phenomena in the step response, respectively, are investigated.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2527-2534
• /
• 2002

An efficient method is proposed for the design of six-bar function generators with complex design tasks. Especially, the desired functions are defined for the entire motion ranges of the input variables. The design problem is defined as a nonlinear optimization problem. A concept of a weighted structural error is introduced for the definition of the objective function. Also simple branch identifiers are incorporated to eliminate the branch problems commonly encountered in a typical linkage synthesis problem. Two example problems of designing a Watt-II type double dwell mechanism and a Stephenson-III type double beat-up mechanism are demonstrated with numerical results. Constraints such as on the Grashof conditions and on the transmission angles are included for practical solutions.