• 대한기계학회논문집
• /
• 제10권4호
• /
• pp.558-567
• /
• 1986

본 논문에서는 출력만의 측정에 의해 실험적 모우드 해석을 하기 위한 구체적 인 절차를 제시하고 선반의 오무드 해석에 적용하였다. 먼저 이 방법의 타당성을 조 사하기 위해 가진기로 가진력을 가하면서 입출력을 모두 기록한 후 출력만에 의한 해 석결과와 입출력을 모두 이용하는 주파수 응답함수법에 의한 결과들을 비교하였으며, 엄밀한 의미에서 가진력을 측정하기 하기 어려운 상황인 실제선삭작업중에 출력인 가 속도 신호만을 측정하여 본 방법을 적용하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.16-19
• /
• 2010

본 논문에서는 송신국과 릴레이에서의 오류확률을 고려한 복호 후 전달 릴레이(DF: Decoded and Forward) 시스템에 대하여 정확한 비트 오류율 분석을 수행하고자 한다. 성능 분석에서는 복호 후 전달 릴레이 시스템의 노드들 간의 채널을 상호 독립적인 레일리 페이딩 채널로 가정하고 변조 방식으로는 BPSK(Binary Phase Shift Keying)를 사용한다. 우선, 정확한 평균 오류율 분석을 위하여 송신국-수신국 링크와 릴레이-수신국 링크 결합시 릴레이노드의 복호결과 오류 유무에 따라 수신 SNR(Signal to Noise Ratio)을 각각 유도하고 복호결과가 오류일 때 수신 SNR이 양수인 경우와 음수인 경우를 고려하여 그에 대한 PDF(Probability Density Function)를 계산한다. 그리고 각각의 경우에 대한 평균 오류율을 유도하였다. 또한 모의실험 결과와의 비교를 통하여 제안된 성능 분석 기법의 정확성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.698_699
• /
• 2009

본 논문은 정적 편심과 회전자 도체 봉 파손에 대해서 각각 특성 해석을 한 후, 두 고장이 복합된 상태를 특성 해석하였다. 해석 대상 전동기는 coupled magnetic circuits 방법으로 모델링 하고, 시뮬레이션하였다. 특성 해석에 필요한 중요 파라미터인 인덕턴스는 winding function 이론으로 계산하였다. 시뮬레이션 결과 중에서 고정자 전류를 전류 신호 분석 기술로 특성 해석을 하였다. 특성 해석 결과에서 고장 상태가 변하면 특정 주파수의 크기가 변하는 것을 알 수 있었다. 복합 고장에서는 정적 편심은 아래쪽 측 대역 성분의 크기를 증가시키고, 회전자 도체 봉 파손은 기본 특이 주파수 주변에 기생 성분을 만드는 것을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.147-149
• /
• 2007

This paper presents design results of anultra-small actuator for auto focus or optical zoom function of mobile phone cameras. The consideration of the actuator is tubular type having a large hole in its center to arrange some optical lenses. The stator consists of 3-phase windings, and the mover is designed to an Nd injection permanent magnet(PM) which magnetized with multi-pole polar pattern. From the numerical analysis that taking into account the magnetizing pattern of the PM, the thrust of the designed actuator is about 40mN with the outer diameter of 7mm.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1615-1623
• /
• 2009

In order to develop reliable on-site partial discharge (PD) pattern recognition algorithm, we introduce Type-2 Fuzzy Neural Networks (T2FNNs) optimized by means of Particle Swarm Optimization(PSO). T2FNNs exploit Type-2 fuzzy sets which have a characteristic of robustness in the diverse area of intelligence systems. Considering the on-site situation where it is not easy to obtain voltage phases to be used for PRPDA (Phase Resolved Partial Discharge Analysis), the PD data sets measured in the laboratory were artificially changed into data sets with shifted voltage phases and added noise in order to test the proposed algorithm. Also, the results obtained by the proposed algorithm were compared with that of conventional Neural Networks(NNs) as well as the existing Radial Basis Function Neural Networks (RBFNNs). The T2FNNs proposed in this study were appeared to have better performance when compared to conventional NNs and RBFNNs.

• 한국실내디자인학회논문집
• /
• 제14권5호
• /
• pp.177-184
• /
• 2005

It is expected that the need of a social welfare hall gradually arise in our community, since we regard the meaning of social welfare as a right which all of the people should have as guardians of the weakest members. Today, ambiguous guidelines on architectural plan of the social welfare hall, which are still not suitable for function and role of this hall, and are not corresponded with architectural design from the early design phase, are proposed in our design competition, because these kinds of halls have not been often built according to functional requirements of the social welfare. Therefore, this study proposes an architectural strategy that should be considered before designing a new social welfare hall, through an analysis of spatial usage in operation programs of various newly-built halls in Korea.

• Structural Engineering and Mechanics
• /
• 제38권4호
• /
• pp.503-516
• /
• 2011

Uncertainty in concrete properties, including concrete modulus of elasticity and modulus of rupture, are predicted by developing a microstructural homogenization model. The homogenization model is developed by analyzing a concrete representative volume element (RVE) using the finite element (FE) method. The concrete RVE considers concrete as a three phase composite material including: cement paste, aggregate and interfacial transition zone (ITZ). The homogenization model allows for considering two sources of variability in concrete, randomly dispersed aggregates in the concrete matrix and uncertain mechanical properties of composite phases of concrete. Using the proposed homogenization technique, the uncertainty in concrete modulus of elasticity and modulus of rupture (described by numerical cumulative probability density function) are determined. Deflection uncertainty of reinforced concrete (RC) beams, propagated from uncertainties in concrete properties, is quantified using Monte Carlo (MC) simulation. Cracked plane frame analysis is used to account for tension stiffening in concrete. Concrete homogenization enables a unique opportunity to bridge the gap between concrete materials and structural modeling, which is necessary for realistic serviceability prediction.

• 대한수학회지
• /
• 제38권4호
• /
• pp.807-842
• /
• 2001

This paper summarizes recent development of analytical and algorithmical results for stationary FIFO queues with multiple Markovian arrival streams, where service time distributions are general and they may differ for different arrival streams. While this kind of queues naturally arises in considering queues with a superposition of independent phase-type arrivals, the conventional approach based on the queue length dynamics (i.e., M/G/1 pradigm) is not applicable to this kind of queues. On the contrary, the workload process has a Markovian property, so that it is analytically tractable. This paper first reviews the results for the stationary distributions of the amount of work-in-system, actual waiting time and sojourn time, all of which were obtained in the last six years by the author. Further this paper shows an alternative approach, recently developed by the author, to analyze the joint queue length distribution based on the waiting time distribution. An emphasis is placed on how to construct a numerically feasible recursion to compute the stationary queue length mass function.

• 천문학회보
• /
• 제39권2호
• /
• pp.101.1-101.1
• /
• 2014

The fluctuation of VLBI visibility phase can be occurred, predominantly caused by the irregular distribution and motion of water vapor in the atmosphere at high frequencies (>1GHz). This radio-seeing effect shows up on filled-aperture telescopes as an anomalous refraction (AR). This can be shown as if the antenna pointing-offset increases, in other words the apparent displacement of radio sources from its nominal position happens. We carried out the single-dish observations on KVN sites in order to check the effect of AR from 2010 to 2014. Orion KL, U Her, and R Leo were observed with 1second sampling time at 22.235GHz and 43.122GHz simultaneously. Each source was observed with the tracking mode for 30 minutes per a source. We analyzed the structure function, power spectrum and Allan variance of the data according to a day and a night, a season and observatories. Finally, we can infer that the AR effect depends on the atmospheric environment, especially tropospheric turbulence.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.304-312
• /
• 2010

The function of IRCM(Infrared Countermeasures) jamming is to cause the missile to miss its intended target by disturbing the seeker tracking process. This paper analyzes the jamming effect of IRCM jamming for a stationary reticle seeker. The phase error containing the azimuth angle information of target is analyzed for the intensity, frequency and duty ratio variation of the jammer pulse signal. We confirmed that the more the jammer frequency is similar to the spinning frequency of the stationary seeker, the more jamming effect is high.