• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.156-166
• /
• 2005

The purpose of this study is to present proper VE application methods to euly design phases. Since VE methodology is more effective on early stage of design phase, the study focused on application of VE methodology in early stage of design process. With the examination of past studies, obstacles of VE application in domestic construction industry are defined. To solve these problems, this paper presents (1) subdivision of VE execution time, (2) an appropriate VE targeting method for construction industry, (3) a resonable and practical function analysis process, and (4) modified design-VE job plan.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1945-1954
• /
• 2017

In recent years, several LCL filter design methods for different converter topologies have been published, many of which use analytical expressions to calculate the ideal converter AC voltage harmonic spectrum. This paper presents the LCL filter design methodology but the focus is on presentation and validation of the non-iterative filter design method for a grid-connected three-phase two-level PWM-VSC. The developed method can be adapted for different converter topologies and PWM algorithms. Furthermore, as a starting point for the design procedure, only the range of PWM carrier frequencies is required instead of an exact value. System nonlinearities, usually omitted from analysis have a significant influence on VSC AC voltage harmonic spectrum. In order to achieve better accuracy of the proposed procedure, the system nonlinear model is incorporated into the method. Optimal filter parameters are determined using the novel cost function based on higher frequency losses of the filter. An example of LCL filter design for a 40 kVA grid-connected PWM-VSC has been presented. Obtained results have been used to construct the corresponding laboratory setup and measurements have been performed to verify the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3976-3982
• /
• 2013

This paper presents a temperature analysis of the chaotic behavior in the voltage controlled CMOS chaotic circuit. The circuit is based on a simple nonlinear function block which is needed for chaotic signal generation. It consists of a NFB (nonlinear function block), a level shifter and non-overlapping two-phase clock for sample and hold. By SPICE simulation, chaotic dynamics such as frequency spectra and bifurcations according to the temperature variations were analyzed. And, it was showed that the circuit can generate discrete chaotic signals within control voltage in the range from 1.2 V to 2.3 V in a specific temperature condition of $25^{\circ}C$.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.56-66
• /
• 1998

During solidification or welding of alloys, the solute redistribution brings out microsegregation. The microsegregation causes the formation of non-equilibrium second phases, shrinkage and porosity degrading mechanical/chemical properties Therefore, it has been required to predict microsegregation quantitatively. To predict the degree of microsegregation, more exact and appropriate computer simulation technique has been actively used during last two decades. To predict the degree of microsegregation in weld metal, an advanced two dimensional model was suggested. In the new model, both primary and secondary arm regions were defined for the analysis region. The growth in the primary arm regina was assumed to be a planar for effective calculation. Especially, for the growth of a secondary arm, a simple and effective mathematical function was established to show the growing pattern, the solute diffusion in the solid phase was calculated by finite difference method (FDM). The solid-liquid interface movement was considered to be in local equilibrium state. The experiments for welding of 310S stainless steel were carried out in order to examined the reasonability and feasibility of this model. The concentration profiles of the solute predicted by this model were compared with those obtained from experimental works.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.254-261
• /
• 1999

An optimal design code for centrifugal pumps has been developed to determine geometric and fluid dynamic variables under appropriate design constraints. The optimization problem has been formulated with a nonlinear objective function to minimize one, two or all of the fluid dynamic losses, the net positive suction head required and the product price of a pump stage depending on the weighting factors selected as the design compromise. The optimal solution Is obtained by means of the Hooke and Jeeves direct search method. The performance analysis Is based on the mean streamline analysis using the present state-of-the-art loss correlations. The optimized efficiency and design variables of centrifugal pumps are presented in this paper as a function of non-dimensional specific speed in the range, $0.5{\leq}N$, ${\leq}1.3$. The diagrams presented herein can be used efficiently in the preliminary design phase of centrifugal pumps.

• Steel and Composite Structures
• /
• v.28 no.1
• /
• pp.99-110
• /
• 2018

In this paper, a new size-dependent quasi-3D plate theory is presented for wave dispersion analysis of functionally graded nanoplates while resting on an elastic foundation and under the hygrothermaal environment. This quasi-3D plate theory considers both thickness stretching influences and shear deformation with the variations of displacements in the thickness direction as a parabolic function. Moreover, the stress-free boundary conditions on both sides of the plate are satisfied without using a shear correction factor. This theory includes five independent unknowns with results in only five governing equations. Size effects are obtained via a higher-order nonlocal strain gradient theory of elasticity. A variational approach is adopted to owning the governing equations employing Hamilton's principle. Solving analytically via Fourier series, these equations gives wave frequencies and phase velocities as a function of wave numbers. The validity of the present results is examined by comparing them with those of the known data in the literature. Parametric studies are conducted for material composition, size dependency, two parametric elastic foundation, temperature and moisture differences, and wave number. Some conclusions are drawn from the parametric studies with respect to the wave characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.732-739
• /
• 2005

The determination of sound pressure radiated from periodic plate structures is fundamental in the estimation of noise level in aircraft fuselages or ship hull structures. As a robust approach to this problem, here a very general and comprehensive analytical model is developed for predicting the sound radiated by a vibrating plate stiffened by periodically spaced orthogonal symmetrical beams subjected to a sinusoidally time varying point load. In this these, we experiment with the numerical analysis using the space harmonic series and the SYSNOISE for measuring the vibration mode and character of response caused by sound radiation with adding the harmonic point force in the thin isotropic plate supported by the rectangular lattice reinforcement. We used the reinforcements, beams of open type section like the style of 'ㄷ' letter; the space of the beams were chosen to be 0.2m, 0.3m, 0.4m. We studied the behavior of sound pressure levels, analysis of vibration mode between support points, connection between frequency function and sound pressure levels, and connection between position function and sound pressure levels.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.7 no.1
• /
• pp.51-65
• /
• 2024

Purpose: This study is to propose the establishment and direction of a public health-medical cooperation system for rehabilitation medical services for people with physical and brain disabilities in Gangneung, Korea. Research design, data and methodology: The study focused on 30 individuals with these disabilities registered. Data was collected from December 20, 2021, to December 31, 2021, through structured surveys administered by researchers visiting disability-related facilities, utilizing convenience and random sampling methods. Descriptive statistics and cross-analysis were applied for analysis. Results: Specifically, among respondents with physical disabilities, a total of 20 needs were identified, with 'Visiting health services' (25.0%) and 'Oral health services' (20.0%) ranking highest. The survey results regarding visit-based rehabilitation services for disability support showed a high demand, emphasizing the necessity of service provision tailored to the needs of recipients, focusing on disability prevention, health management, and motor function recovery, rather than solely medical or therapeutic concepts. Conclusions: Gangwon National University Hospital, as the regional referral hospital in Gangwon, should collaborate with Gangwon Province Rehabilitation Hospital to provide prompt acute rehabilitation services. Moreover, cooperation and collaboration with Gangneung Asan Hospital, the tertiary hospital in the region, are essential to ensure continued acute and recovery phase rehabilitation therapy for a certain period in the Gangneung area.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1281-1285
• /
• 2004

A line of Japanese quail selected for increased body weight for 15 generations (C) and an unselected control line (K) were used to examine the impact of selection for body weight on the growth curve of Japanese quail. In addition, the effect of sex on the growth curve in each line was also studied, namely females of C (CF), males of C (CM), females of K (KF) and males of K (KM). The monophasic and diphasic growth models were studied for adequacy in describing growth curves of quail in both sexes of the C and K lines. The monophasic function provided almost the same growth rate for both sexes in both lines. However, the growth rates calculated by means of the diphasic function differed between sexes for both lines, except for those calculated for C during the second growth phase. While there were 2-3 days difference between sexes in age at maximum gain in both lines with a monophasic model, the difference between sexes in the age at maximum gain in both lines became greater according to the diphasic model. There were 5 and 7 days difference between sexes in the age at maximum gain in line C for the first and second growth phases, respectively. A difference between sexes of 18 and 11 days in the age at maximum gain for the first and second phases, respectively, was estimated for line K when the diphasic function was fitted. The use of diphasic functions provides more detailed information on growth patterns. The results showed that the use of the diphasic function was better because it provided greater insights into understanding the biology of growth.

• Archives of design research
• /
• v.20
• /
• pp.75-85
• /
• 1997

After the second world war the vulgar functionalism, which was called as the international style, was developed in the interest of the post capitalistic society. The vulgar functionalism reflected only inhuman commercialism and brought to psycho-mental and social problems. By the result in the mid-sixties the criticism movement of the functionalism had began as a king of the 68-movement in the german architecture and design scene. And it went on in the seventies, and had a decisive influence on the forming of the extended functionalism. The extended functionalism is bases on the definition of functions in the using process of the mass production and consumption society. Those functions, viz. Practical Function, Theoretical Function, Ecological Function, (formal-) Aesthetical Function, Indicating Function, Symbolical Function, have been the core criteria in the analysis and developing phase of the todays' german design scene.