• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.41-48
• /
• 2008

Functional analysis of air transport mission is conducted to establish the performance requirements of the commercial transport designs. The analysis process begins by making a top-down analysis to the aircraft system level mission functions. Correctly interpreting the top-level performance requirements is the first step in designing and building an aircraft system. Each function and sub-function is allocated and examined to the aircraft level and flight operations phase to optimize the system performance and design requirements, such that these lower-level requirements can be traced back to the top-level requirements they are designed to fulfill. Special attention is given to making sure all interfaces, both internal and external, are addressed. The results are also in good resources of functional hazard assessment involved in certification processes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.499-501
• /
• 2011

The phase noise spectrum distribution of COMS Communication transponder was measured and analyzed in the view point of transmission scheme. The effects of phase noise are also analyzed according to the transmission methods. The phase noise of COMS communication transponder may be increased because of utilization of ka-band. So the effects of phase noise will be increased in conditions of high-order transmission mode. The phase noise characteritics are measured for COMS communication transponder with MSM function and the effects for phase noise are analyzed in this paper.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.3
• /
• pp.53-59
• /
• 2000

A received signal in mobile communication environments exhibits variation in both amplitude and phase due to the multipath fading. Therefore we analyzed the performance of DS/CDMA(Direct Sequence/code Division Multiple Access) DPSK(Differential Phase Shift Keying) system for the variations of PLL(Phase Locked Loop) gain with Tikhonov probability density function, assuming that the phase difference between transmitter and receiver signals is phase error. As a result, it is discovered that the performance of system could be improved by the control of PLL gain in compared with the DPSK system which does not consider the phase error. If the PLL gain is 1dB, the difference of two systems is 4.8dB and 0.4dB at 7dB. and if 30dB, it coincides. From above, it

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.79-83
• /
• 2002

We present a method to improve encryption level by use of a rotational term in the double random-phase-mask(RPM) encryption system. Encrypted optical images are recorded in a photorefractive LiNbO$_3$:Fe crystal and reconstructed by using a phase conjugated reading beam. The encryption level for the analog image is analyzed by use of visibility function.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.2
• /
• pp.85-93
• /
• 1993

The rise of a large gas bubble or slug in a Micro Two-Phase Closed Thermosyphon with a thin wire insert has been analiged by the potential flow theory. The effect of the interfacial surface tension is explicitly accounted by application of the Kelvin-Laplace equation and solved for the bubble shape. The solution is expressed in terms of the Stokes stream function which consists of an infinite series of Bessel functions. The conditions of the bubble movement in a Micro Two-Phase Closed Thermosyphon were theoretically ascertained.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.11
• /
• pp.3695-3705
• /
• 1996

We designed the hot wind tunnel to reproduce the conditions of utility boiler and carried out its performance test, in order to investigate the particulate two-phase flow behaviour, the fouling and heat transfer characteristics to the heat exchanger. The hot wind tunnel introduces the control system to control the temperature in the test section. The particle is injected into the hot gas stream. The fouling probe (cylindrical tube) is positioned normal to the particulate gas-particle two-phase flow and cooled by the air. The temperature of gas and cooling air, and temperature in the fouling probe are measured as a function of time, giving the local and averaged heat transfer and fouling factor. The shape of particulate deposition adhered to the fouling probe is also observed.

• Journal of the military operations research society of Korea
• /
• v.24 no.2
• /
• pp.57-74
• /
• 1998

This paper is aimed to propose an testing and evaluation strategy and plan in Military Information Systems, especially focusing on development an“New-generation Wargame Model”. Through this research, we concluded that the effective and efficient testing/evaluation strategy/plan can aid the productivity, maintainability, availability, etc., of the Militray Information Systems. Highlights of the proposed testing and evaluation strategy and plan for Military Information Systems are as follows. First, in the unit and module integration testing phase, hybrid of black-box and white-box testing techniques are available for Military Information Systems and progressive approach for module integration phase should be considered because of the complexity. Second, in the system testing phase, integrated module should be tested with respect to the function and performance that should be satisfied with the user requirements, specifications, risk analysis, etc., Third, in the acceptance testing phase, reliability, interoperability, maintainability, availability, integrity, etc., must be considered in the actual or mini-operational environments for testing efficiently and effectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.274-285
• /
• 1992

Among various Power converters, a variable voltage variable frequency (VVVF) three-phase PWM inverter is regarded as most promising power converter due to its capabilities, which permits the control of voltage, frequency and harmonic contents in a single power stage employing only on DC source. As a modulating technique of the PWM inverter, the regular sampling technique has rendered possible the on-line computation and generation of PWM control waveforms with a reasonably high switching frequencies. In this paper, microprocessor based three-phase regular samping PWM inverter with real-time control algorithm and control circuits for driving three phase AC motor has been developed. Harmocic components of PWM waveform were analized theoretically in terms of Bessel function series and then calculated by digital computer and observed with spectrum analyzer.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.574-578
• /
• 2004

In this paper, a nonlinear feedback system is analyzed for a surface micromachined resonant accelerometer. For this, a brief illustration of the plant dynamics is given. In the analysis, the periodic signal in the nonlinear feedback loop is obtained by the limit cycle point, which is best approximated via the describing function method. Considering the characteristic feature of plant dynamics, a simple phase shifted relay with finite slope is designed for the nonlinearity implementation. With a describing function for random plus sinusoidal input, we analyzed the effect of a white Gaussian noise on oscillation frequency. Finally, simulation and experimental result is given.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.112-113
• /
• 2019

Recently, supplementary cementitious materials such as blast-furnace slag, fly ash and silica fume have been widely used as substitutes for cementitious materials. In this study, the deformation behavior of compressive loading of C₃S paste with 50% fly ash was analyzed by X-ray scattering data and pair distribution function analysis. The obtained results were compared with 131-day-old pure C₃S paste. The Ca(OH)₂ of the C₃S-FA paste showed almost complete elastic behavior, consistent with the deformation behavior of the r-range of 20 to 40, and the C-S-H phase contributed to the range of PDF r-range of less than 20. In addition, C-S-H of C₃S-FA showed greater deformation resistance than C₃S paste.