• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1275-1276
• /
• 2015

Full wave electromagnetic simulation or fabricated models of an antenna are used to predict its radiation characteristics. In this work estimation of radiated power of an antenna based on its electrical model is presented. The computed radiated power using the electrical model have good agreement with the radiated power results obtained through the full wave electromagnetic simulation of the antenna model. The presented approach offers the advantage of saving of computation time of the full wave EM simulation.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.18-25
• /
• 2005

본 연구에서는 뒷전, 전단류와 초기교란의 상호작용에 의한 불안정파의 생성 기제의 분석과 뒷전 산란현상을 고차의 전산공력음향학을 이용하여 모사하였다. 수치적 알고리즘은 Hybrid 기법에 기초하였으며, Simple Linearized Euler Equation과 Full Linearized Euler Equation의 결과를 비교를 통해 정상류 구배항이 불안정파의 생성에 중요한 역할을 함을 볼 수 있었다. 또한 Full Navier-Stokes Equation을 이용한 결과와 비교함으로써, Full Linearized Euler Equation은 뒷전의 초기 근접장에서 불안정파를 해석하는데 있어서 Full Navier-Stokes Equation 보다 효율적임을 알 수 있다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3724-3731
• /
• 2022

It is important for an ICRF full wave code to simulate the SOL (Scrape Off Layer) plasma as well as the core inside of the LCFS (Last Closed Flux Surface) for the precise prediction of the coupling between the antenna and the core plasma in tokamaks. To this end, a two dimensional full wave code based on a Fourier spectral algorithm has been developed. The spectral algorithm and procedures are described and the simulation results for the minority heating in KSTAR are reported including electric field, power absorption and power flux.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1149-1152
• /
• 1999

A gain controllable precision full-wave rectifier for the measurements of small-signal voltage is presented. It consists of gain controllable inverter superdiode and noninverter superdiode. The results of simulation with PSpice and experiment on breadboard show that the proposed rectifier has the characteristic of precise rectification and amplification for small signal voltage.

• 전자공학회논문지C
• /
• 제36C권11호
• /
• pp.18-28
• /
• 1999

RFIC 설계를 위한 새로운 패키지(SOP, Small Outline Package) 등가 회로 모델을 제시한다. RF 영역의 패키지에서 패들(paddle)은 이상적인 그라운드(ground)로 동작하지 못하며 패들과 MMIC 다이(die) 사이의 커플링(coupling) 문제 및 손실에 의한 기생 효과로 인해 MMIC 회로에 심각한 영향을 준다. 패키지의 전기적 효과에 대한 새로운 등가 회로 모델과 파라미터(parameter) 추출 방법을 SOP 패키지를 예로 들어 제시한다. 제시한 모델의 정확성은 상용 full-wave solver와 제시한 모델을 HSPICE 시뮬레이션하여 구한 5-파라미터를 상호 비교함으로써 모델의 정확성을 평가하고 모델이 약 8㎓까지 full-wave 해석 결과와 일치함을 보인다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.471-477
• /
• 2014

In this paper, a modeling and co-simulation methodology is proposed to predict the radiated electromagnetic interference (EMI) from on-chip switching I/O buffers. The output waveforms of I/O buffers are simulated including the on-chip I/O buffer circuit and the RC extracted on-chip interconnect netlist, package, and printed circuit board (PCB). In order to accurately estimate the EMI, a full-wave 3D simulation is performed including the measurement environment. The simulation results are compared with near-field electromagnetic scan results and far-field measurements from an anechoic chamber, and the sources of emission peaks were analyzed. For accurate far-field EMI simulation, PCB power trace models considering IC switching current paths and external power cable models must be considered for accurate EMI prediction. With the proposed EMI simulation model and flow, the electromagnetic compatibility can be tested even before the IC is fabricated.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.94-102
• /
• 2013

선형 배열 안테나의 구조가 배열 안테나의 중심을 기준으로 대칭 구조인 점을 이용하여 효율적으로 배열 안테나의 빔 주사각에 따른 방사패턴을 계산할 수 있는 mirror AEP (active element pattern) 방법을 제안한다. Mirror AEP 방법은 AEP 방법과 비교하여 배열 안테나의 방사패턴을 계산하기 위하여 필요한 full-wave 전산모의를 이용하여 구하는 소자의 AEP 수를 약반으로 줄일 수 있기 때문에 계산 시간을 약 반으로 줄일 수 있다. 배열 안테나를 구성하는 단위 안테나 소자의 방사패턴이 대칭인 경우에는 mirror AEP 방법으로 계산한 방사패턴과 full-wave 전산모의를 이용하여 구한 방사패턴과의 차이가 넓은 빔 주사각 범위에서 매우 작았다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.241-247
• /
• 2018

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding and sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using a highly advanced Modeling & Simulation (M&S) system of the Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was conducted and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.59-65
• /
• 2021

In this paper, the transmission characteristics of the multi-layered composite material with wire mesh and honeycomb core for aircraft applications have been analyzed with the proposed method. The proposed method converts the conductive wire mesh into effective layer, while for the dielectric honeycomb core, effective permittivity has been derived based on volume fraction with the proposed method. The proposed method has been verified through comparison with full-wave simulation and revealed excellent. In addition, the calculation time of the proposed method is a few order of magnitude faster in comparison with the full-wave simulation.

• 전력전자학회논문지
• /
• 제15권5호
• /
• pp.394-400
• /
• 2010

본 논문에서는 Buck Converter 동작 원리를 Full -Bridge Inverter에 적용한 전자식 안정기를 제안하였다. 전자식안정기는 EMI 필터, 수동 PFC, Full-Bridge Inverter로 2-stage로 구성되어 있다. PFC는 신뢰성 확보를 위해 수동 PFC를 사용하였다. Full-Bridge Inverter는 High Side와 Low Side 스위치의 구동 주파수를 각각 고주파와 저주파로 구동하여 Buck Converter의 동작을 구현 하였다. 램프를 저주파수 구형파로 구동하여 음향공명현상을 피하게 되었으며, 고주파수 스위칭으로 인덕터의 부피를 줄였다. 제안한 방법은 시뮬레이션과 실험을 통해 증명하였다.