• 제목/요약/키워드: Full arch

검색결과 138건 처리시간 0.022초

DCC 모형에서 동태적 상관계수 추정법의 효율성 비교 (Performance Comparison of Estimation Methods for Dynamic Conditional Correlation)

  • 이지호;성병찬
    • 응용통계연구
    • /
    • 제28권5호
    • /
    • pp.1013-1024
    • /
    • 2015
  • 본 논문에서는 다변량 DCC(dynamic conditional correlation) GARCH 모형에서 동태적 상관계수를 추정하기 위한 대표적 방법인 쌍별 추정법과 다차원 추정법의 효율성을 비교한다. 이를 위하여 금융 시장의 변동성을 반영하는 다변량 시계열을 생성하고 이에 대한 DCC GARCH 모형을 수립 및 추정하는 시뮬레이션을 실시하였다. 또한 KOSPI 200 섹터지수를 이용하여 포트폴리오를 구성하고 이의 변동성 추정 및 VaR 계산을 통하여 동태적 상관계수 추정에 대한 정확성을 평가하였다. 그 결과로서, 전반적으로 다차원 추정법이 쌍별 추정법보다 우수함을 발견하였다. 특히, 다차원 추정법에서 상대적으로 상관관계가 낮은 시계열을 추가할수록 쌍별 시계열에 대한 동태적 상관계수 추정의 정확성을 높여줌을 발견하였다.

Lunar Effect on Stock Returns and Volatility: An Empirical Study of Islamic Countries

  • MOHAMED YOUSOP, Nur Liyana;WAN ZAKARIA, Wan Mohd Farid;AHMAD, Zuraidah;RAMDHAN, Nur'Asyiqin;MOHD HASAN ABDULLAH, Norhasniza;RUSGIANTO, Sulistya
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권5호
    • /
    • pp.533-542
    • /
    • 2021
  • The main objective of this article is to investigate the existence of the lunar effect during the full moon period (FM period) and the new moon period (NM period) on the selected Islamic stock market returns and volatilities. For this purpose, the Ordinary Least Squares model, Autoregressive Conditional Heteroscedasticity model, Generalised Autoregressive Conditional Heteroscedasticity model and Generalised Autoregressive Conditional Heteroscedasticity-in-Mean model are employed using the mean daily returns data between January 2010 and December 2019. Next, the log-likelihood, Akaike Information Criterion and Schwarz Information Criterion value are analyzed to determine the best models for explaining the returns and volatility of returns. The empirical results have deduced that, during the NM period, excluding Malaysia, the total mean daily returns for all of the selected countries have increased mean daily returns in contrast to the mean daily returns during the FM period. The volatility shocks are intense and conditional volatility is persistent in all countries. Subsequently, the volatility behavior tends to have lower volatility during the FM period and NM period in the Islamic stock market, except Malaysia. This article also concluded that the ARCH (1) model is the preferred model for stock returns whereas GARCH-M (1, 1) is preferred for the volatility of returns.

Clinical comparison of intraoral CMOS and PSP detectors in terms of time efficiency, patient comfort, and subjective image quality

  • Kamburoglu, Kivanc;Samunahmetoglu, Ercin;Eratam, Nejlan;Sonmez, Gul;Karahan, Sevilay
    • Imaging Science in Dentistry
    • /
    • 제52권1호
    • /
    • pp.93-101
    • /
    • 2022
  • Purpose: This study compared the effectiveness of complementary metal-oxide semiconductors (CMOS) and photostimulable phosphor (PSP) plates as intraoral imaging systems in terms of time efficacy, patient comfort, and subjective image quality assessment in real clinical settings. Materials and Methods: Fifty-eight patients (25 women and 33 men) were included. Patients were referred for a full-mouth radiological examination including 1 bitewing radiograph (left and right) and 8 periapical radiographs for each side (left maxilla/mandible and right maxilla/mandible). For each patient, 1 side of the dental arch was radiographed using a CMOS detector, whereas the other side was radiographed using a PSP detector, ensuring an equal number of left and right arches imaged by each detector. Clinical application time, comfort/pain, and subjective image quality were assessed for each detector. Continuous variables were summarized as mean±standard deviation. Differences between detectors were evaluated using repeated-measures analysis of variance. P<0.05 was accepted as significant. Results: The mean total time required for all imaging procedures with the CMOS detector was significantly lower than the mean total time required for imaging procedures with PSP (P<0.05). The overall mean patient comfort scores for the CMOS and PSP detectors were 4.57 and 4.48, respectively, without a statistically significant difference (P>0.05). The performance of both observers in subjectively assessing structures was significantly higher when using CMOS images than when using PSP images for all regions (P<0.05). Conclusion: The CMOS detector was found to be superior to the PSP detector in terms of clinical time efficacy and subjective image quality.

심한 치아 마모 환자의 수직 교합고경 증가를 동반한 하악 편악 수복 증례 (Mandibular full-arch rehabilitation with increased vertical dimension of a patient with severe tooth wear)

  • 김현진;김종진;백진;차현석;이주희
    • 구강회복응용과학지
    • /
    • 제38권3호
    • /
    • pp.162-170
    • /
    • 2022
  • 심한 치아 마모를 가진 환자의 경우 수직 교합고경 상실에 대한 평가가 필요하다. 적절한 수직 교합고경을 설정하여 환자의 악간 관계를 안정적으로 회복시켜야 한다. 환자는 77세 여성으로, 아래 앞니가 아프고 어금니가 없어서 불편하다는 주소로 내원하였다. 초진 시 전반적인 치아 마모가 관찰되었으며, 하악 전치의 치아 마모로 인한 치수의 병적 변화가 관찰되었다. 진단 및 평가 후 교합고경의 상실은 관찰되지 않았으나 보철 수복을 위한 악간 공간 부족이 확인되었다. 수직 거상을 동반한 하악 구강회복술을 시행하였으며, 심미적, 기능적으로 만족할 만한 결과를 얻었기에 보고하는 바이다.

높은 아치형 지중강판 구조물의 시공 중 거동 분석 (Behaviors of the High-profile Arch Soil-steel Structure During Construction)

  • 이종구;조성민;김경석;김명모
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.71-84
    • /
    • 2003
  • 지중강판 구조물은 강판부재 내에 발생하는 휨모멘트에는 매우 취약하기 때문에 그 주변을 양질의 흙으로 뒷채움하여 주변 흙과의 상호작용에 의하여 상부에 작용하는 하중을 지지한다. 그러나, 구조물 측면을 뒷채움할 때나 최소토피고를 확보하지 못한 상태에서 활하중이 작용할 때에는 강판부재내에 과도한 모멘트가 발생할 수 있다. 현재 설계기준에서는 허용변형량을 제시하여 시공 중에 과도한 변형이 발생하는 것을 방지하고 있으며 Duncan(1979)과 McGrath 등(2001)은 강도해석법을 제안하여 시공 중에 발생하는 모멘트를 강판의 소성강도 이내로 제한하고 있지만, 허용변형량은 경험적으로 규정한 값이고 강도해석에 의한 구조 안정성 검토는 유한요소 해석결과를 바탕으로 제안되었기 때문에 이들에 대하여 실험적 검증이 필요하다. 이 연구에서는 높은 아치형 구조물에 대한 실규모 현장시험을 실시하여 시공 중 거동과 활하중에 대한 하중지지 거동을 분석하였다. 시험결과를 바탕으로 시험시공 구조물의 허용변형량을 '높이의 1.45%' 로 추정할 수 있었는데 이는 설계기준의 허용값인 '높이의 2%' 보다 작은 값이었다. 또한, 계측결과를 Duncan과 McGrath 등이 제안한 강도해석결과와 비교하여 Duncan은 성토하중에 의한 모멘트는 과소평가하고 활하중 모멘트는 과대평가 하지만 McGrath 등은 두 값을 모두 실제와 근접하게 예측함을 알 수 있었다. 그러나, 두 방법에 의한 소성힌지에 대한 안전율은 실제 안전율과 잘 일치하여 두 방법 모두 시공 중에 작용하는 활하중에 대한 구조 안정성을 적절히 평가할 수 있음을 확인하였다.나 길항력(6.4 ㎜)은 남아있었다. 또한 분자량 10kDa 이하의 분획에서는 chitinase 활성은 없으나 길항력(5.2㎜)은 나타내었고, 80℃에서 열처리하여도 길항력(5.0mm)이 남아있어 효소 이외 다른 생리활성물질이 존재함을 확인하였다.rin, (+)-taxifolin 3-O--$\beta$-D-glucopyranoside, (+)-catechin 및 benzoic acid의 함량은 건조 및 처리 온도가 증가할 수록 감소하는 양상을 나타내었다.tier taste and the Doenjang with P. japonica Powder had the least sweet taste. In the flavor and overall Preference, the Doenjang with P. japonica powder was the lowestEX>로 측정되었고, 계사내 지붕의 표면 온도는 최고 $29^{\circ}C$가 측정되었다. 계사 내 표면 온도 및 닭의 표면 온도는 계사내 공기온도의 영향을 많이 받는 것으로 나타났다.ill in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times

치과위생사의 방사선 촬영업무의 확대에 대한 문헌적 고찰 (A literature review on expansion of dental hygienists' radiography operations)

  • 최영숙;김진경;장종화;박용덕
    • 한국치위생학회지
    • /
    • 제9권2호
    • /
    • pp.111-124
    • /
    • 2009
  • This study analyzes through the review of literature and laws the exposure time, clinical frequency, and radiation exposure of intraoral and extraoral radiography as well as of panoramic radiography performed by dental hygienists in dental clinics, compares the dental radiology curriculums of radiological science and dental hygiene departments, and proposes the expansion of dental hygienists' radiography operations. The radiology curriculums were compared between the radiological science and dental hygiene departments of colleges. For new analysis by radiography for dental diagnosis, the exposure time, radiation absorbed dose, effective dose, and number of days of natural radiation were compared by the type of oral radiation films and radiographical techniques proposed by domestic and international studies. The exposure time of panoramic radiography is 15 seconds and it takes about two minutes for completion, whereas the exposure time of the standard radiography is 0.2~0.8 seconds and it takes 10 times longer for completion of the radiography of full mouth than the panoramic radiography. The standard radiography can cause distortions of radiation at severely curved parts of dental arch and palatopharyngeal reflex. However, panoramic radiography can be performed even for lock jaw patients, causes less inconvenience to patients and is much simpler than the standard radiography. The percentage of dental clinics where radiography is performed by dental hygienists was 92.0%, and the percentage of standard film radiography by dental hygienists was 98% whereas the percentage of panoramic radiography by dental hygienists was 92%. For the absorbed dose which is an indicator of radiation exposure, the When the effective dose which is an indicator of the danger of radiation exposure was converted to the number of days of natural radiation, it was 3.3 days for panoramic radiography, but 13.9 days for the full mouth standard radiography by bisecting angle technique which was 4.2 times longer than the panoramic radiography. There were two colleges that had a dental radiology course with two credits in the departments of radiological science. The credits for dental radiology courses in the department of dental hygiene ranged varied by college, ranging from 3 to 8; on average, the theory course was 2.2 credits and the practice course was 2.02 credits. To summarize the above results, the percentage of dental clinics where panoramic radiography is performed by dental hygienists under the guidance of dentists is high. Panoramic radiography has become an essential facility for dental clinics. It is faster than standard film radiography and less dangerous due to low radiation exposure. Panoramic radiography is a simple mechanical job that does not require training of oral radiography by radiotechnologist. Because panoramic radiography is one of major operations which must be performed at all times in dental clinics, it must be designated as intraoral technique rather than extraoral technique, or legalized for inclusion in the scope of operations of dental hygienists.

  • PDF

재하시험과 유한요소해석에 의한 플라스틱 필름 온실의 거동특성 분석 (Evaluation on the Behavioral Characteristics of Plastic Greenhouse by Full-scale Testing and Finite Element Analysis)

  • 류희룡;이응호;조명환;유인호;김영철
    • 생물환경조절학회지
    • /
    • 제21권4호
    • /
    • pp.459-465
    • /
    • 2012
  • 부재 교차 결합부 조건에 따른 초기강성은 고정 조건인 경우와 비교하여 반고정 조건인 경우 33% 작게 나타났으나 부재 교차 결합부 특성에 의하여 재하지점과 3m 떨어진 지점에서는 9% 크게 나타났다. 즉, 고정 조건인 경우 구조물 전체로 하중이 분산되어 재하지점과 떨어진 지점에서는 상대적으로 반고정 조건 구조물의 강성이 높게 나타났다. 기초 조건에 따른 초기 강성은 강관 삽입 기초의 경우에는 고정기초 조건과 비교하여 31% 크게 나타났으며, 휨강성은 20% 높게 나타났다. 인터페이스 요소(beam interface element, BIE) 및 지반요소(3-D solid element)를 사용하여 재하시험 결과를 기반으로 각종 계수를 산정하고 시험조건과 동일하게 수치모델링하여 유한요소해석을 수행한 결과 실험결과와 유사한 구조거동을 나타냈다. 그러나 극한하중 조건에서는 비선형 특성의 발현 등에 의하여 다소 상이한 결과 값을 보였다. 이상의 결과로부터 플라스틱 필름 온실의 설계 및 구조성능 평가에서 절점 및 지점 조건에 대한 임의 또는 과다한 이상화는 구조물의 성능 평가에 적지 않은 영향을 줄 수 있음을 알 수 있었다. 한편 플라스틱 필름 온실은 세장한 부재로 구성된 유연한 철골 구조물이므로 구조성능 산정에 있어서 좌굴과 함께 대변형 및 지반의 비선형 특성 등을 충분히 고려해야 할 것으로 판단된다.

치조골 상실에 따른 상악 치아군 저항중심의 변화에 관한 유한요소해석 (Finite-element analysis of the shift in center of resistance of the maxillary dentition in relation to alveolar bone loss)

  • 성상진;김인태;국윤아;전윤식;김성훈;모성서
    • 대한치과교정학회지
    • /
    • 제39권5호
    • /
    • pp.278-288
    • /
    • 2009
  • 효과적인 교정치료계획의 수립을 위하여 치열군의 저항중심의 위치에 대한 평가는 필수적이다. 이번 연구의 목적은 상악 치열군(4전치, 6전치, 14치아)에서 치조골 손실에 따른 저항중심의 위치변화를 조사해보고자 하였다. 상악 전치열 14개 치아와 치주인대 및 0 mm, 2 mm, 4 mm 손실된 치조골의 3차원 유한요소 모델을 제작하였고 각 치아군(4전치, 6전치, 14치아)별로 치관부를 협측, 설측호선 및 splint wire로 고정하여 치아군 모델을 제작한 후 상악 중절치의 절단연 중점에서 연장된 splint wire에 4전치와 6전치군에는 200 g, 14치아군에는 400 g의 후방 견인력과 압하력을 적용하여 저항중심의 수직적, 수평적 위치를 분석하였다. 4전치군에서 저항중심의 수직 위치는 치조골 0 mm, 2 mm, 4 mm 손실에 따라 중절치의 절단연에서 치근방향 13.5 mm, 14.5 mm, 15 mm, 수평 위치는 후방 12 mm, 12 mm, 12.5 mm, 6전치군에서는 치근방향 13.5 mm, 14.5 mm, 15.5 mm, 후방 14 mm, 14 mm, 14.5 mm, 14치아군에서는 치근방향 11 mm, 13 mm, 14.5 mm, 후방 26.5 mm, 27 mm, 25.5 mm에 위치하였다. 모든 치아군에서 저항중심은 치조골 손실에 따라 치근첨 방향으로 이동하였으나, 치조정과의 거리는 가까워졌고, 4전치군과 6전치군에서 저항중심은 치조골 손실에 따라 후방으로 이동하였으나, 14치아군에서는 치조골 2 mm 손실 시에는 후방으로 이동하였으나, 4 mm 손실 시에는 전방으로 이동하였다.

삼국시대(三國時代) 병기체제(兵器體制)의 연구(硏究) (This Study of the Arms Used in the Three Kingdoms)

  • 김성태
    • 헤리티지:역사와 과학
    • /
    • 제34권
    • /
    • pp.20-58
    • /
    • 2001
  • In order to unravel the characteristics of arms used in the 'Three Kingdoms,' Kokuryo, Silla and Paikje. the classification and the developing procedures of the arms should be first discussed. At first, the basic arms of the soldiers of Three Kingdoms were iron swords, iron spearheads, and bows. During that period, swords attached a ring pommel were commonly used. But after 5A. D. a sword with a decoration pommel appeared. Infantry generally used iron spearheads. From the late 4A. D. the long spearheads were broadly used in cavalry battles. In the late 6A. D. infantry mainly used long spearheads, and this resulted in the foundation of long spearheads units. There were two kinds of bows: Short Bow whose arch is small and Long Bow whose arch is long. It is known that the Short Bow was widely used in Kokuryo and Paikje up to 5A. D. In the early era, infantry used Long Bow, yet it was vastly used after 6A. D. when a castle's strategical value was great and defending a castle was. significant. Above mentioned, as basic combat weapons, iron spearhead and bow were fundamental. In particular, the spearhead was the essential weapon to a soldier. Yet, arrow gun and hook-shape cutters were important weapons. Especially, after 6A.D., when a castle became strategically pivotal in military, the arrow gun became the important weapon. This resulted in the foundation of arrow gun units. Hook-shape cutters were used to snatch horsemen or to climb up to fall the castle. Yet, the cutter was not the Three Kingodoms' basic weapon. In addition, the three stages of arms development in the Three Kingdoms are formation stage, development stage, and settlement stage. The formation stage was the period when premitive military unit appeared in the Three Kingdoms. It ranged from 1B. C. to the mid 3A. D. At that time according to regions. there were two weapon systems operating: North area including Kokuryo and the northern part of Paikje and South area including Silla, Kaya and the southern part of Paikje. ln North area a sword with a ring attached at the end of the holder, iron spear with neck and mid-size flat holder and iron arrowhead with an extension to fix, were used. In this period, during a war calvary units were mostly used and their weapon systems seemed possibly to succeed in that of Kochosun. In the development stage, when LoLang's influence on surroundings became weak, Koguryo, Paikjae and Silla had directly contacted each other. In the late 3A.D. to the early 6A.D., Silla achieved a drastic improvement in weapon system. This was the period when Kokuryo played a leading role in arms race. Kokuryo's arms manufacturing techniques passed onto Silla, Kaya and Paikje. In combat strategy a joint operation between infantry and calvary prevailed even if their military tactics were different. In a calvary battle heavily armed horsemen played import roles at this period. The horsemen and even horses were heavily guarded with iron armors. After all, the appearance of fully armed horsemen implies the very need of powerful destructive forces in weapon system. At that time, basic weapons were a big sword with a ring attached at the end of the holder, swallow's tail-shape spear with neck, and iron spearhead with neck and an extension. The settlement stage began at the mid 6A.D., when it was the revolutionary period in the arms development history. Of course, actual proofs and picture documents were not sufficient enough to penetrate full scale of the weapon system. But, according to historical circumstances and historic records, it is very certain that this period was the peak in arms development. In this period special military units, such as infantry-calvary companies, Archery units and Long spear units, that executed particular duties with special weapons, were founded. This became the characteristics of the settlement stage.

천단 및 막장면 수평보강에 의한 토사터널 보강효과 - 실대형실험 (Reinforcing Effects around Face of Soil-Tunnel by Crown & Face-Reinforcing - Large Scale Model Testing)

  • 권오엽;최용기;우상백;신종호
    • 한국지반공학회논문집
    • /
    • 제22권6호
    • /
    • pp.71-82
    • /
    • 2006
  • NATM 터널의 갱구부와 갱내의 연약층 구간에는 굴착 보조공법으로 대부분 강관이나 유리섬유보강(Fiber-glass Reinforced Plastic)관에 의한 그라우팅공법이 적용되고 있다. RPUM이나 UAM으로 알려져 있는 이러한 공법으로 굴착전 막장면 천단을 선보강하여 굴착 시 주변지반의 안정을 확보할 수 있다. 특히 지반이 연약하여 자립이 어려운 경우 최근에는 막장면 천단 뿐 아니라 막장면 수평보강을 실시하여 터널 및 주변지반의 안정성을 확보하는 추세에 있다. 이러한 막장면 천단 및 수평보강 형태에 따른 보강효과는 현재 일부 수치해석적 방법과 실내 축소모형실험에 의해 연구된 바 있으나, 이러한 연구들은 복잡한 경계조건을 필요로 할 뿐 아니라 실제 터널굴착 및 보강단계를 적절히 모사할 수 없는 단점이 있다. 따라서 본 연구에서는 실제 RPUM시공을 재현하는 실대형 모형실험을 행하였다. 본 실험은 대형 토조를 제작하고 단계별 굴착과 상재하중을 재하하여 사질토지반 내 터널 천단보강 및 막장면 수평보강형태(무보강, 천단보강, 천단보강+막장면 수평보강, 막장면 수평보강)에 따른 막장면 주변지반 보강효과를 살펴보았다. 실험결과, 막장면 수평보강만으로도 주변지반 침하와 터널 반경방향 변위에 대한 상당한 억제효과를 확인할 수 있었다. 굴진방향과 평행한 종방향의 연직응력 변화를 측정한 결과 막장면 전방 $0.5D{\sim}1.0D$ 지반에 응력이 집중되어 막장면 선행보강의 필요성이 입증되었다. 천단보강재인 FRP관의 축력과 휨모멘트를 측정한 결과 대부분이 막장면으로부터 0.75D 위치에서 최대값이 측정되어 천단보강재 최소길이는 1.0D이상이 되어야 할 것이다. catalase와 peroxidase는 SOD나 APX는 달리 단일 밴드 또는 주요 밴드가 있고 높은 활성을 보여 정제시 유리하게 작용할 것으로 보인다. prospects will be also discussed.behaviors to ferromagnetic behavior was observed. Tunneling barrier called "decay length for tunneling" for the films having the thickness of Co layer from 1.4 to 1.6 nm was measured to be ranged from 0.004 to 0.021 ${\AA}$$\^$-1/.문에 기업간 관계를 연구하는 측면에서는 탐험적 연구성격이 강하다. 더 나아가 본 산업의 주된 연구가 질적이고 기업내부만을 연구했던 것에 비교하면 시초적이라고 할 수 있다. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너만의 시각을 검증했기 때문에 해석에서 유의할 필요가 있다. 또한 타당성확보 노력을 기하였지만 측정도구 면에서 엄격한 개발과정을 준수하지는 못했다