• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.223-234
• /
• 2016

This study aimed to the adsorption-removal of high- radioactive iodide (I) contained in the initially generated high-radioactive seawater waste (HSW), with the use of AgX (Ag-impregnated X zeolite). Adsorption of I by AgX (hereafter denoted as AgX-I adsorption) was increased by increasing the Ag-impregnated concentration in AgX, and its concentration was suitable at about 30 wt%. Because of AgCl precipitation by chloride ions contained in seawater waste, the leaching yields of Ag from AgX (Ag-impregnated concentration : about 30~35 wt%) was less than those in distilled water (< 1 mg/L). AgX-I adsorption was above 99% in the initial iodide concentration ($C_i$) of 0.01~10 mg/L at m/V (ratio of weight of adsorbent to solution volume)=2.5 g/L. This shows that efficient removal of I is possible. AgX-I adsorption was found to be more effective in distilled water than in seawater waste, and the influence of solution temperature was insignificant. Ag-I adsorption was better described by a Freundlich isotherm rather than a Langmuir isotherm. AgX-I adsorption kinetics can be expressed by a pseudo-second order rate equation. The adsorption rate constants ($k_2$) decreased by increasing $C_i$, and conversely increased by increasing the ratio of m/V and the solution temperature. This time, the activation energy of AgX-I adsorption was about 6.3 kJ/mol. This suggests that AgX-I adsorption is dominated by physical adsorption with weaker bonds. The evaluation of thermodynamic parameters (a negative Gibbs free energy and a positive Enthalpy) indicates that AgX-I adsorption is a spontaneous reaction (forward reaction), and an endothermic reaction indicating that higher temperatures are favored.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.753-767
• /
• 2013

Soil contamination has continuously increased worldwide, thus the remediation for the contaminated soils has risen steadily. However, the consideration of ecological safety for the remediated soils and their agricultural uses has been very limited. Therefore, this study was to investigate the influences of selected environmentally-friendly agricultural materials, organic by-product fertilizer (OF), charcoal (CC), and biochar (BC), as soil conditioners for improving poor chemical properties of fuel-oil removed soil by land farming technique. Two different remediated soils, remediated soil A (RSA) and remediated soil B (RSB), were selected. Soil texture of both RSA and RSB was sandy loam. The chemical properties of RSA and RSB were as follows: soil pHs of 8.5 and 8.7, soil organic matter contents of 7.4 and 5.5g $kg^{-1}$, total nitrogen contents of 0.26 and 0.10g $kg^{-1}$, available phosphorus concentrations of 7.2 and 4.4mg $kg^{-1}$, and exchangeable calcium concentrations of 14.8 and $11.7cmol_c$ $kg^{-1}$, respectively. Results of the properties were not reached for the optimal values for cultivating crops that were recommended by National Academy of Agricultural Science at Rural Development Administration in Korea. However, after applying OF, CC, and BC, the chemical properties of soils were selectively improved, which were that soil organic matter content and available phosphorus concentration increased, whereas the soil pH were not changed. In particular, the chemical properties were positively changed more with the application of 5.0% biochar. Thus, continuous management of the remediated soils with applying the eco-friendly agricultural materials can improve the quality of reme-diated soils.

• YAKHAK HOEJI
• /
• v.50 no.5
• /
• pp.313-321
• /
• 2006

There are three kinds of liquid petroleum marker which is extracted by the basic or acidic, and both developer. Korean marker, Unimark 1494 DB (marker) have been spectrophotometrically analysed by the determination of absorbance at 582 nm after base extraction by Unimark 1494 DB Developer C-5 (developer). Some blue dyes which have same reactive radical of marker and can be changed deep blue color in base developer extraction (BDE), may be increased absorbance at 582 nm, but dyes or markers which can be increased the absorbance, were not unclear. In this experiment, effects of three dyes or marker such as Orimax Green 151 (the mixture of CI Solvent Yellow 16 and CI Solvent Blue 70), quinizarin and Orimax Blue 2N (CI Solvent Blue 35), and two solvent such as topasol (P-250) and lubricant (P-8) on the absorbance were studied by HITACHI Recording Spectrophotometer U-3300. It shows that all of them increased absorbance at 582 nm after BDE. Absorbance at 582 nm can be showed 0.0544 by Orimax Green 151 at the concentration of 3.96 mg/l, quinizarin at the concentration of 1.38 mg/l, and Orimax Blue 2N at the concentration of 2.73 mg/l in the artificial petroleum (normal diesel oil: topasol: lubricant=2 : 4: 4), respectively. Absorbance, 0.0544 indicates that concentration of marker is 1.64 mg/l in the reference curves, respectively. And also these results can be showed that the artificial petroleum have about 10% cheep fuel such as kerosene which have marker (16.0 mg/l). Absorbance of P-250 was 0.01361-0.22842 depending upon the purchasing date, and that of P-8 was 0.05644. pH of developer was 14.83, and so this result indicates that Unimark 1494 DB is a base extractable petroleum marker, phenylazophenol (US Patent No. 5,252,106). In the BDE, the slight color of Orimax Blue 2N, Orimax Green 151 and quinizarin in artificial petroleum changed to deep bright blue color, respectively. These result indicate that the absorbance at 582 nm by BDE may be increased not only by azo, diazo, amine and ketone (anthraquinone, coumarin) dyes or markers, but also the contaminants of P-250 and P-8 which have same as reactive radical of dyes or markers.

• Journal of Radiation Protection and Research
• /
• v.33 no.3
• /
• pp.113-120
• /
• 2008

In this study, The TRITGO code was introduced, which can predict the amount of tritium production, it's transport, removal, distribution and the level of contamination for the produced hydrogen by the tritium on the VHTR (very high temperature gas cooled reactor). The TRITGO code was improved so that the permeation to the IS Iodine Sulfide) loop for producing the hydrogen can be simulated. The contamination level of the produced hydrogen by the tritium was predicted by the improved code for the VHTR with 600MW thermal power. The contamination level for the produced hydrogen by tritium was predicted as 0.055 Bq/$H_2-g$. This level is three order of lower than the regulation value of 56 Bq/$H_2-g$ from Japan. From this study, the following results were obtained. it is important that the fuel coating (SiC layer) should be kept intact to prevent the tritium from releasing. Also it is necessary that the level of impurity such as 3He and Li in the helium coolant and the reflector consisting of the graphite should be kept as low as possible. It was found that the capacity of the purification system for filtering the impurities directly from the coolant will be the important design parameter.

• International Journal of Automotive Technology
• /
• v.5 no.4
• /
• pp.221-238
• /
• 2004

Wall interactions of direct injection spray were investigated using laser-sheet imaging, shadowgraphy, wetted footprint and phase Doppler interferometry techniques. A narrow-cone high-pressure swirl injector is used to inject iso-octane fuel onto a plate, which has three different impact angles inside a pressurized chamber. Heated air and plate conditions were compared with unheated cases. Injection interval was also varied in the heated case to compare dry- and wet- wall impingement behaviors. High-speed macroscopic Mie-scattering images showed that presence of wall and air temperature has only minor effect on the bulk spray structure and penetration speed for the narrow-cone injector tested. The overall bulk motions of the spray plume and its spatial position at a given time are basically unaffected until a few millimeters before impacting the wall. The surface properties of the impact surface, such as the temperature, the presence of a preexisting liquid film also have a small effect on the amount of wetting or the wetted footprint; however, they have strong influence on what occurs just after impact or after a film is formed. The shadowgraph in particular shows that the plate temperature has a significant effect on vapor phase propagation. Generally, 10-20% faster horizontal vapor phase propagation is observed along the wall at elevated temperature condition. For impingement onto a preexisting film, more splash and evaporation were also observed. Contrary to some preconceptions, there is no significant splashing and droplet rebounding from surfaces that are interposed in the path of the DI gasoline spray, especially for the oblique impact angle cases. There also appears to be a dense spray front consists of large sac spray droplets in the oblique impact angle cases. The bulk of the spray is not impacted on the surface, but rather is deflected by it The microscopic details as depicted by phase Doppler measurements show that the outcome of the droplet impaction events can be significantly influenced. Only droplets at the spray front have high enough Weber numbers for wall impact to wet, splash or rebound. Using the sign of vertical velocity, the time-resolved downward droplets and upward droplets are compared. The Weber number of upward moving droplets, which seldom exceeds unity, also decreases as the impact angle decreases, as the droplets tend to impact less and move along the wall in the deflected spray plume.

• Journal of Nutrition and Health
• /
• v.11 no.4
• /
• pp.31-38
• /
• 1978

Younghung-myun is located on a small island under the jurisdiction of Gyunggi province. The island occupying a total of approximately 40sq km is populated by 5,850 people. Two areas within the island were selected for this survey; 1) Nae 4-ri in Younghung-myun (mainly engaged in farming) 2) Nae 5-ri in Younghung-myun (mainly engaged in fishery) The survey was conducted for the period of 5-12 august 1978. Intake of foods and nutrients of all members in the households surveyed by means of questionnaire was computed based on number of meals a day. On the other hand, daily intake of nutrients by an individual was calculated by sex, age and type of work based on the conversion rate of RDA (Korean Recommended Dietary Allowances for Adult). The results obtained are summarized; 1. Status of food intake Average daily food intake of an individual in the surveyed areas was 1,018gm. Out of 1,018gm above, 490gm which represent 48% of the total intake were from cereals, grains or other vegetative products. Ratio of animal-origin foods was determined as only 16% of the total intake. These findings led us to the conclusion that people in the surveyed areas live heavily on vegetative foods. 2. Status of nutrients intake 1) Overall average intake of calorie by an individual in the surveyed areas was 2026.3Kcal per day. On the other hand, average calorie intake by adult persons was 2,491.3 Kcal per day, which is lower than 2,700 Kcal recommended by RDA by approximately 7.7%. Furthermore, it was observed that most of 2,491.3 Kcal obtained by adult persons was from such vegetative foods as cereals, grains, ect. 2) Overall average intake of protein by an individual in the areas surveyed was 52.2gm per dar. On the other hand, average protein intake among adult persons was 67.7gm a day, which indicates lower intake of protein than 80gm of RDA. It was also found that 84.3% of the protein intake by an adult person was of plant origin. 3) Overall average of fat intake by an individual in the areas surveyed was 18.9gm per day, whereas average fat intake among adult persons was 23. 2gm a day. It was brought to our attention that the average fat intake by adult persons is much lower than 36gm recom mended by RDA. 4) Average calcium intake among adult persons in the areas surveyed was 457.1mg per day, that is somewhat lower than 500mg in RDA. However, average iron intake among adult persons in the areas was slightly higher with 10.5mg a day than 10mg of RDA. 5) With exception with vitamin C, intake of all other vitamin groups, such as vit. A, vit. $B_1$, vit. $B_2$ and niacin, were lower among the inhabitants than recommended by RDA. 3. Economic status Average schooling years of food handlers was 6.5 years with average monthly income of \89,000 in the areas surveyed. Petroleum was used by majority of the households for fuel.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.293-301
• /
• 2010

Optical fiber cable, as a sensor, was installed on the wall of KAERI(Korea Atomic Energy Research Institute) Underground Research Tunnel(KURT) in order to monitor the physical stability of the tunnel, which was constructed for technical development and demonstration of radioactive waste disposal. This monitoring system has two simultaneous measurements of temperature and strain over time using Brillouin backscatter. According to the results of the monitoring from Jan. 2008 to Nov. 2009, there is no significant displacement or movement at the tunnel wall However, the cumulative volume of total strain increased slightly as time passes with the comparison of the reference observation, which was measured in Jan. 2008. The change in cumulative volume of total strain indicates that the strain level had been affected by saturation and de-saturation phenomena due to groundwater fluctuation at several points at KURT. This system is based on the distributed sensing technique concept, not point sensing. By using this system, a displacement can be detected with the range from $20{\mu}{\varepsilon}$ to $28,000{\mu}{\varepsilon}$ every 1m interval in minimum. A temperature variation can be monitored at every 0.5m interval with the resolution of 0.01 in minimum. Based on the study, this monitoring system is potentially applicable to long term monitoring systems for radioactive waste disposal project as well as other structures and underground openings.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.497-503
• /
• 2016

Flue gas desulfurization gypsum is produced from emission process of fossil fuel power plant to remove sulfur dioxide ($SO_2$) from exhaust gas. Production of flue gas desulfurization gypsum in Republic of Korea has been increasing due to the enforced regulations by government agency. Since flue gas desulfurization gypsum has characteristic that is similar to that of natural gypsum, there is a strong possibility for flue gas desulfurization gypsum to replace the role of natural gypsum. However, consumption of such material is still limited, only used for agricultural purposes or to make gypsum boards, it is necessary to expand the use of this material more aggressively. In this research, the chemical and mineralogical properties of flue gas desulfurization gypsum were investigated, and flue gas desulfurization gypsum with heat treatment was used to make cement paste. According to the results, it was found that flue gas desulfurization gypsum used in this experiment was a very high purity gypsum, and shown to have similar property to that of natural gypsum. Heat treating flue gas desulfurization gypsum above $100^{\circ}C$ was shown to bring beneficial effect on both compressive strength and drying shrinkage

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.2
• /
• pp.21-42
• /
• 1998

This paper aims at examining the regional comparison of the business organization of retailing in the Seoul and Taegu metropolitan areas, as an attempt to understand regional structure of retailing within metropolitan areas which represents the suburbanization. On the national level, retail sales have concentrated on larger metropolitan area, the Seoul metroplitan area, the first largest metropolitan area, having higher sales for population scale. While the Taegu metropolitan area, the third largest metropolitan area, appears to lower retail sales for population scale. In order to confirm such phenomenon, this paper is to analyze and to compare the industrial composition of retailing by industry in 1991 of Seoul with that of Taegu. And this paper is to analyze the regional comparison of business organization of retailing: the percents of establishments under four employees, of juridical establishments, of employees of ordinary times, the annual sales per establishment of retailing. And the characteristics of business organization of retailing by industry are analyzed by principal components analysis, and the explanation of the types with component in each district(city, county, ward) is analyzed by cluster analysis(Ward method). The data of 1991 were obtained from the statistics in the Report on Establishment Census(Vol.3 Wholesale and Retail Trade) published by the National Statistics Office. The results are as follows: 1. The composition of retailing by industry in Seoul metropolitan area by annual sales in 1991 is characterized as appeared very higher composition rates of retailing of textiles, clothing, footwear and apparel accessaries', ‘retailing of furniture, home furnishings and equipment’, retailing of jewellery and watches’, ‘retailing of printed matter and stationery’, ‘retailing of personal transport equipment and gasoline service stations’, and ‘general merchandise stores’. But in Taegu metropolitan area, ‘retailing of food, beverages and tobacco’, ‘retailing of drugs, cosmetics and other chemical goods’, 'retailing household fuel’, and ‘genernal retail trade, n.e.c.’appears very high. Therefore Seoul metropolitan area has larger business scale and retailing of shopping goods has developed than Taegu metropolitan area.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.1-9
• /
• 1995

This study was carried to investigate the biodegradability of phenol in the wastewater with the two sludge blanket-packed bed reactor in series. Each reactor had a dimension of 0.09 m i.d. and 1.5 m height and consisted of two regions. The lower region was a sludge blanket of 0.5 m height and the upper region was a packed-bed of 1 m height. The packed bed region was charged with ceramic raschig rings of 10 mm i.d., 15 mm o.d. and 20 mm length. The reactors were operated at 35$\circ$C and the hydraulic retention time(HRT) was maintained 24 hours. The synthetic wastewater composed of glucose and phenol as major components was fed into the reactor in a continuous mode with incereasing phenol concentration. In addition, the nutrient trace metals($Na^+, Mg^{2+}, Ca^{2+}, PO_4^{3-}, NH_4^+, Co^{2+}, Fe^{2+}$ etc.) were added for growing anaerobes. The phenol concentration of the effluent, the overall gas production, the composition of product gas, the efficiency of COD reduction and the duration of acclimation period were measured to determine the performance of the anaerobic wastewater treatment system as the phenol concentration of the influent was increased from 600 to 2400 mg//l. Successfully stable biodegradation of phenol could be achieved with the anaerobic treatment system from 600 to 1, 800 mg/l of the influent phenol concentration. The upper level of influent phenol loading was high enough to meet most of the practical requirement. The duration of acclimation increased with the phenol loading. At steady state of the influent phenol concentration of 1800 mg/l, the treatment performance indicated the phenol reduction efficiency of 99%, the COD reduction efficiency of 99% and the gas production rate of 37 l/day. At the influent phenol concentration of 2400 mg/l, however, the operation of the treatment system was noted unstable. While the concentration of methane in biogas decreased with increasing the influent phenol loading, the carbon dioxide was increased. However, the concentration of hydrogen was varied negligibly. The concentration of methane was high enough to be used as a fuel. As a result, it is suggested that anaerobic phenol wastewater treament was economical in the sense of energy recovery and wastewater treatment.