• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.509-518
• /
• 1995

A study for the flame stability and the combustion characteristics of coaxial diffusion flame was conducted. The fuel employed was natural gas. The experimental variables were rim thickness of fuel tube, blockage ratio of the outer diameter of fuel tube to the inner diameter of air tube, and momentum ratio of fuel to air. It was consequently found that the stability in the neighborhood of the fuel rim depended on the rim thickness, especially in the case of above 3 mm, and that the stable region of the flame extended remarkably due to the formation of recirculation zone above rim. The effect of the blockage ratio on the flame stability was found to be minor in the case of above 3 mm of rim thickness. Between the momentum ratio 2 and 3, the stable flame zone was widely established as well good combustion. With increasing the fuel-air momentum ratio, axial velocity, turbulence intensity, and Reynolds stress increased.

• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.81-88
• /
• 2005

본 논문은 단일 태양전지판으로 구성된 통신해양기상위성(COMS)에 대하여 모멘텀 덤핑에 소요되는 연료량을 분석하였다. 먼저 하루 중 일정한 시간에 모멘텀 덤핑을 수행할 경우를 가정하여 최적의 시간을 선정하는 작업을 수치해석적인 접근을 통하여 수행하였고 요구되는 연료량을 분석하였다. 또한 모멘텀 덤핑에 소요되는 연료량을 절감하기 위하여 남북위치유지 시점과 모멘텀 덤핑시점을 근사적으로 일치시키는 방안을 제안하였다. 마지막으로 제안된 기법의 유효성을 분석하기 위하여 궤도 시뮬레이션을 수행하였다.

• 한국분무공학회지
• /
• 제27권4호
• /
• pp.181-187
• /
• 2022

For carbon neutrality, direct-injection hydrogen engines are attracting attention as a future power source. It is essential to estimate the transient injection rate of hydrogen for the optimization of hydrogen injection in direct injection engines. However, conventional injection rate measurement techniques for liquid fuels based on the injection-induced fuel pressure change in a test section are difficult to be applied to gaseous fuels due to the compressibility of the gas and the sealing issue of the components. In this study, a momentum flux measurement technique is introduced to obtain the transient injection rate of gaseous fuels using a force sensor. The injection rate calculation models associated with the momentum flux measurement technique are presented first. Then, the volumetric injection rates are estimated based on the momentum flux data and the calculation models and compared with those measured by a volumetric flow rate meter. The results showed that the momentum flux measurement can detect the injection start and end timings and the transient and steady regimes of the fuel injection. However, the estimated volumetric injection rates showed a large difference from the measured injection rates. An alternative method is suggested that corrects the estimated injection rate results based on the measured mean volumetric flow rates.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.64-71
• /
• 2005

효과적인 초음속 연소를 위해 연료와 공기의 빠른 혼합이 필요하며, 혼합 향상을 위해 연료분사 방식에 대한 여러 연구들이 수행되어 왔다. 본 연구에서는 길이-깊이 비가 4.8, 후면 경사각이 $22.5^{\circ}$인 개방형 공동 모델을 사용하였으며, 마하수 1.92에서 운동량비에 따른 분사구 주변의 유동 특성 및 연소실 내 압력 분포를 슐리렌 가시화와 압력 측정을 사용하여 파악하였다. 운동량비는 연료의 침투거리와 분사지역의 유동에 큰 영향을 끼친다.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.117-124
• /
• 2001

This paper presents turbulent characteristics of an impinging F-O-O-F type injector in which fuel ad oxidizer impinge on each other to atomize under the different momentum ratio. Water was used as an inert simulant liquid instead of fuel and oxidizer. The droplet size and velocity in the impinging spray flow field were measured using a PDPA. The gradient of the spray half-width(b$_2$) along the long-axis direction declined throughout the entire spray flow field with increasing the momentum ratio from 1.19 to 6.48. However, the gradient of the half-width(b$_1$) along the short-axis direction decreased with increasing the momentum ratio. The turbulence intensity and turbulent kinetic energy were converged into the center of the center of the initial region with increasing the momentum ratio. As the momentum ratio increased from MR=1.19 to MR=6.48, the turbulent shear stress decreased. The results of this study can be used for the design of an impinging type injector for liquid rackets.

• 한국추진공학회지
• /
• 제13권4호
• /
• pp.9-15
• /
• 2009

스크램제트 엔진의 연소기 내부 유동은 초음속이므로 유동의 잔류시간과 혼합율의 증대가 효과적인 연소를 가능하게 하는 주요 요인으로 작용한다. 본 연구에서는 연료-공기 혼합기로써 L/D=4.8인 개방형 공동 모델을 사용하였고, 공동 앞에서의 경사 연료 분사 시 분사구 주위와 공동 주위의 유동특성을 살펴보기 위하여 레이저 슐리렌 기법과 압력측정을 실시하였다. 측정에 사용된 레이저 슐리렌은 10 ns의 매우 짧은 광원 지속시간을 보유하여 공동부근의 비정상 유동 현상을 효과적으로 관찰할 수 있었다. 압력측정은 연료 분사비 J(운동량비)를 변화시켜 가며 측정하였으며, 운동량비에 따른 연소기 내부 주요 압력상승 지점의 변화를 살펴 볼 수 있었다.

• 한국연소학회지
• /
• 제17권4호
• /
• pp.30-37
• /
• 2012

The flame lengths and NOx emission characteristics of syngas $H_2$/CO turbulent non-premixed jet flames were investigated. The flame length which is the main parameter governs NOx emission was studied for various syngas compositions. The flame length was compared with previous correlation between Froude number and flame height and it shows that they have good agreements. It was confirmed that the turbulent jet flames herein investigated are in the region of buoyancy-momentum transition. NOx emission was reduced with increased Reynolds number and CO contents in syngas fuel and with decreased fuel nozzle diameter which is attributed by decreased flame residence time. Previous EINOx scaling based on flame residence time of $L_f^3/(d_f^2U_f)$ satisfies only the jet flame in momentum-dominated region, not buoyancy-momentum transition region. The simplified flame residence time ($L_f/U_f$) was adopted in modified EINOx scaling. The modified scaling satisfies the jet flames not only in momentum-dominated region but in buoyancy-momentum transition region. The scaling is also satisfied with $H_2$/CO syngas jet flames.

• 한국연소학회지
• /
• 제9권1호
• /
• pp.1-10
• /
• 2004

The results of a series of experiments executed by using two pilot-scale oxy-fuel burners are presented. The oxy-fuel burners are designed for maximum capacity of 50,000kcal/hr, 200,000kcal/hr and installed in the test furnace. The effects of turn-down ratio, excess oxygen ratio, nozzle exit velocity, injection angle, and swirl vane angle on the combustion characteristic are investigated. Temperature distributions are measured using R-type and Molybdenum sheathed C-type thermocouple at various points of the flame. The results showed that maximum temperature and mean temperature increase with the increase of turn-down ratio and momentum. The maximum flame temperature was increased about 35% compared to the case of equivalent air operated condition. In addition, optimum burner type, excess oxygen ratio and nozzle characteristics are obtained for this oxy-fuel glass melting furnace.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.281-284
• /
• 2008

스크램제트 엔진의 연소기 내부 유동은 초음속이므로 유동의 잔류시간과 혼합율의 증대가 효과적인 연소를 가능하게 하는 주요 요인으로 작용한다. 본 연구에서는 연료-공기 혼합기로써 개방형 공동 모델을 사용하였고, 공동 앞에서의 경사 연료 분사 시 분사구 주위와 공동 주위의 유동특성을 살펴보기 위하여 레이저 슐리렌 기법과 압력측정을 실시하였다. 레이저 슐리렌은 10 ns의 광원 지속시간으로 공동 부근의 비정상 유동 현상을 효과적으로 관찰 할 수 있었다. 또한, 압력측정은 연료 분사 J(운동량비)를 변화시켜 가며 측정하였으며, 운동량비에 따른 연소기 내부 주요 연소발생 지점의 변화를 살펴 볼 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.376-385
• /
• 2002

Spray impingement and fuel film formation models with cavitation have been developed and incorporated into the computational fluid dynamics code, STAR-CD. The spray/wall interaction process was modeled by considering the effects of surface temperature conditions and fuel film formation. The behavior of fuel droplets after impingement was divided into rebound, spread and splash using the Weber number and parameter K(equation omitted). The spray impingement model accounts for mass conservation, energy conservation, and heat transfer to the impinging droplets. The fuel film formation model was developed by integrating the continuity, momentum, and energy equations along the direction of fuel film thickness. Zero dimensional cavitation model was adopted in order to consider the cavitation phenomena and to give reasonable initial conditions for spray injection. Numerical simulations of spray tip penetration, spray impingement patterns, and the mass of film-state fuel matched well with the experimental data. The spray impingement and fuel film formation models have been applied to study spray/wall impingement in high-speed direct injection diesel engines.