• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.1
• /
• pp.9-19
• /
• 2005

Airplane fuel takes large portion of airline operation cost and recently it has been grown up to about 25% of operating cost. So airlines are making efforts to reduce fuel consumption continuously and also aircraft manufacturers are making efforts to develop less fuel-consuming engines but it takes great expenses and times to develop such engines. In this study, fuel requirements of FAR and JAR, especially contingency fuel requirements, are compared and the effectiveness of each method is analyzed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.2
• /
• pp.246-262
• /
• 2013

With increases in international oil prices, the proportion of fuel cost to the operational costs of a ship is currently increasing. To reduce fuel cost, a method for determining an economical route for a ship based on the acquisition of the sea state and the estimation of fuel consumption is proposed. The proposed method consists of three items. The first item is to acquire the sea state information in real time. The second item is to estimate the fuel consumption of a ship according to the sea state. The last item is to find an economical route for minimal fuel consumption based on the previous two items. To evaluate the applicability of the proposed method, it was applied to routing problems in various ocean areas. The result shows that the proposed method can yield economical ship routes that minimize fuel consumption. The results of this study can contribute to energy savings for environmentally friendly ships.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.142-148
• /
• 2018

In recent years, Korea's aviation industry has been developing rapidly due to the emergence of low-cost airlines. In order to survive in such competition, airlines are making various efforts to save the operation cost as much as possible. Fuel costs account for more than 25% of operating costs. For airlines, reducing aircraft fuel costs is an important part of improving profitability. In this study, analyzing the difference weight between flightplan and W&B Manifest for calculated the fuel that was unnecessarily loaded. As a method to calculate the unnecessary fuel was used by Airbus company flight planning program.

• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.561-574
• /
• 2006

This study presents the results of an economic analysis for a comparison of the single layer and double layer alternatives with respect to a HLW-repository. According to a cost analysis undertaken in the Korean case, the single layer option was the most economical alternative. The disposal unit cost was estimated to be 222 EUR/kgU. In order to estimate such a disposal cost, an estimation process was sought after the cost objects, cost drivers and economic indicators were taken into consideration. The disposal cost of spent fuel differs greatly from general product costs in the cost structure. Product costs consist of direct material costs and direct labor and manufacturing overhead costs, whereas the disposal cost is comprised of construction costs, operating costs and closure costs. In addition, the closure cost is required after a certain period of time elapses following the building of a repository.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1057-1063
• /
• 2014

Concerning $CO_2$ reduction from International Societies, lots of laboratories and relevant societies suggest many reports on how to reduce fuel consumption from their specific ways. Undoubtedly, cutting costs is the final desired destination for owner outcome, but many questions there are on the way yet: how is this measure working? how efficient is it? On what size of ship would it work best and be the most effective? etc. Fuel cost is one of the major cost elements for ship owners and/or operators. And by reducing fuel consumption owners and/or operators will reduce both their costs and the environmental impact from their ship. This paper is aim to address how the measures work for saving fuel consumption through improve propulsion efficiency, installation cost and benefit can be calculated easily in the return on investment for estimated one year operation, and finally their compatibility with other fuel saving measure devices.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.121-128
• /
• 2002

In this paper, the fuel economy of plug-in type hybrid electric vehicle is investigated through simulation. For the simulation study, 2 shaft type parallel hybrid powertrain is chosen and its operation modes are described. The operation algorithm which yields operation points of minimal fuel cost is suggested. Dynamic model fur operation of HEV and simulation procedure is described. Simulation results of fuel economy is compared to non plug-in type HEV as well as conventional vehicle. With total driving distance of 37km and full usage of 2kwh of electric energy stored in battery pack, plug-in type HEV shows 28-30% improved fuel economy compared to non plug-in type HEV and 86-93% improved fuel economy compared to conventional vehicle.

• Journal of Institute of Convergence Technology
• /
• v.4 no.1
• /
• pp.9-13
• /
• 2014

The purpose of this study is analysis to vehicle's fuel economy and emission gas characteristics by fuel type. The test vehicle were selected to similar weight and performance, the test vehicle was used three representative mode(CVS-75, HWFET and NEDC) in order to evaluation fuel economy and emission gas. For reference, environment pollution cost was calculated on the basis of the exhaust emissions occurred in the test in progress.

• Journal of Agricultural Extension & Community Development
• /
• v.25 no.3
• /
• pp.149-160
• /
• 2018

This study aimed to analyze the replacement investment of the diesel fuel system with the pallet fuel system in the Korean farming sector. Equivalent annual annuity approach was used to resolve a discrepancy of useful life in capital goods and to facilitate investment analyses in an independent perspective. Data was obtained from previous studies on economic analysis of greenhouse tomato, paprika and cucumber. Results showed that the replacement with the pallet fuel system was acceptable irrespective of the remaining period of useful life for the diesel fuel system. In addition, sensitivity analysis with government support level, repair cost, and light and heat energy cost show ed robustness in the possibility of replacement with the pallet fuel system while the speed of replacement was accelerated with an increase in the amount of diesel fuel used and price of diesel fuel, and a decrease in price of the pallet fuel. The result implied that the replacement investment rather than a new investment was appropriate for existing greenhouse farmers and the pallet fuel system was acceptable to replace existing diesel fuel system in producing greenhouse tomato, paprika and cucumber.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.55-59
• /
• 2010

High VOC(Vehicle Operating Cost) is the main reason for the rehabilitation of paved road and VOC is composed of fuel consumption, lubricant oil consumption, parts consumption, etc. Fuel consumption is one of the largest components of VOC and the roughness of road represents the deterioration level of the road. For these reasons, the fuel consumption is measured for different IRI(International Roughness Index) in this study. The fuel consumption was measured by processing the voltage signal of fuel injector of vehicle and the speed was measured with GPS. The change rate of fuel consumption for different IRI can be calculated with the results of this test. It's concluded that fuel consumption(L/100km) of medium and large passenger car increases 7 times fast of the increase of IRI(m/km) around 3.5m/km in the speed range of 40 ~ 100km/h, and fuel consumption is the best at 60km/h.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.257-266
• /
• 2015

There is no polynomial-time algorithm that can be obtain the optimal solution for economic load dispatch problem with non-convex fuel cost functions. Therefore, electrical field uses quadratic fuel cost function unavoidably. This paper proposes a valve-point optimization (VPO) algorithm for economic load dispatch problem with non-convex fuel cost functions. This algorithm sets the initial values to maximum powers $P_i{\leftarrow}P_i^{max}$ for each generator. It then reduces the generation power of generator i with an average power cost of $_{max}\bar{c}_i$ to a valve point power $P_{ik}$. The proposed algorithm has been found to perform better than the extant heuristic methods when applied to 13 and 40-generator benchmark data. This paper consequently proves that the optimal solution to economic load dispatch problem with non-convex fuel cost functions converges to the valve-point power of each generator.