• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.680-685
• /
• 2006

The latest trend in the automotive industry demands the development of high stiffness car bodies and the securement of inter-system performance for low vibration and noise vehicles. This demand, however, conflicts with need for light weight design and greater fuel efficiency, thus raising the importance of optimization design to satisfy both developmental goals. We chose two European medium sedans, which has gasoline engine and diesel one, to elucidate the noise characteristics of diesel passenger cars, whose sales have been increasing in both Korea and Europe. In the present study a systematic experiment was conducted to analyze the noise characteristics in diesel cars. we made it possible for differentiating car management according to customer demand while allowing for improved commercial feasibility. it was possible to improve interior noise by 2 dB(A) on average sound pressure level. As a result, by 4% higher on articulation index(AI).

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.69-75
• /
• 2009

Recently developed automotive components are getting lighter providing a higher fuel efficiency and performance. Following the current trend, this study proposes a structural optimization method for the lower control arm installed at the front side of a Vehicle. Lightweight design of lower control arm can be achieved through design and material technology. In this research, the shape of lower control arm was determined by applying the optimization technology and aluminum was selected as a steel-substitute material. Strength performance is the most important design requirement in the structural design of a control arm. This study considers the static strength in the optimization process. For the optimum design, the durability analysis is performed to predict its fatigue life. In this study, the kriging interpolation method is adopted to obtain the minimum weight satisfying the strength constraint. Optimum designs are obtained by the in-house program, EXCEL-Kriging. Also, based on the optimum model obtained for the static strength, the optimization of Index of Fatigue Durability is carried out to get th optimum fatigue performance.

• 유통과학연구
• /
• 제14권3호
• /
• pp.73-83
• /
• 2016

Purpose - The parcel delivery service(courier) industry all over the world has been expanding its market so far, but its growth has been declining in recent years. In this situation, most parcel delivery companies are having trouble with managing themselves because of the pressure from the customer to increase service level and decrease the rate. The purpose of this study is to provide ways to improve competitive advantages of the parcel delivery service industry by evaluating the multi-period operating efficiency of Korea, Japan and global service providers. Research design, data, and methodology - The data for the period of 2011 to 2014 were collected from the annual reports published by parcel delivery companies. In this study, we analyze the marketability (revenue), profitability (operating profits), and management conditions (net profits) of parcel service companies by combining information on human resources (number of employees) and material resources (total assets and equity). Therefore, the number of employees, total assets, and equity are selected as input variables, and revenue, operating profits, and net profits as the output variables. In this study, DEA (Data Envelopment Analysis) is used to measure the comparative efficiency and MPI (Malmquist Productivity Index) is used to analyze the trend of change of the efficiency for a multi-year period. Results - The operational efficiency scores of medium-sized parcel delivery companies in Korea are higher than other larger competitors such as Korean, Japan and Global larger companies. As of 2014, Logen(1.878) was found to be the most efficient parcel delivery enterprise, followed by KGB (1.224), and Kyoungdong(1.002). Otherwise, Hanjin(0.235), CJ(0.262), Hyundai Logistics(0.657), DHL(0.611), UPS(0.766), FedEx(0.498), TNT(0.350), Yamato(0.762) and Sagawa(0.520), larger sized companies, were done inefficiently. The productivity of parcel delivery companies is influenced by endogenous factors as well as exogenous ones such as changes in business environment and technological advances. Conclusions - Korean medium-sized companies have relatively high efficiency scores in operation. That is why they still survive the competitive market in Korea where market restructuring on the industry has been expected to be conducted for many years. The reason why medium-sized couriers had higher efficient scores than larger couriers is that most of couriers spend more operating expenses versus unit price of delivery which is the amount of money that is needed in order to send a package by parcel service. So the delivery unit price must be taken into account by all the expenses associated with the cost of fuel, labor and maintenance expenses for facilities, etc. therefore, the unit price must be increased to strengthen business competitive power. In order for the industry to have more competitive advantage, the companies need to make profits by increasing demand volume and raising the delivery rate to provide high-quality delivery service to customers. And both endogenous and exogenous change must take precedence in order to strengthen their competitiveness.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.83-89
• /
• 2011

Diesel engines can produce higher fuel efficiency and lower $CO_2$ emission, they are subject to ever more stringent emission regulation. However, there are two major emission concerns fo diesel engines like such as particulate matter (PM) and nitrogen oxides (NOx). Moreover, it is not easy to satisfy the regulations on the emission of NOx and PM, which are getting more strengthened. One of the solutions is to apply the new combustion concept using multistage injection such as HCCI and PCCI. The other solution is to apply after-treatment systems. For example, lean NOx trap catalyst, Urea-SCR and others have various advantages and disadvantages Especially, Urea-SCR system have advantages such as a high conversion efficiency and a wide operation conditions. Hence the key factor to implementation of Urea-SCR technology, good mixing of urea(Ammonia) and gas, reducing Ammonia slip. Urea mixer components are required to facilitate evaporation and mixing because the liquid state of urea poses significant barriers for evaporation, and the distance to mixer is the most critical that affect mixer performance. In this study, to find out the distance from injector to mixer and simulation factor, a laser diagnostics and high speed camera are used to analyze urea injector spray characteristics and to present a distribution of urea solution in transparent manifold In addition, Droplet Uniformity Index is calculated from the acquired images by using image processing method to clarify the distribution of spray.

• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1067-1073
• /
• 2021

선박으로부터 발생하는 온실가스 배출을 저감하기 위한 규제가 점차 강화되고 있다. 현존선에서도 EEXI(Energy Efficiency Existing Index)가 도입되었으며 이와 같은 온실가스 배출 감축목표를 달성하기 위해 다양한 연구가 진행되고 있다. 본 연구에서는 국제항해에 종사하는 현존선 중 자동차운반선에 태양광 발전시스템을 적용하여 연료유 사용량을 줄임으로써 온실가스 배출이 저감될 수 있는 시스템을 제안하였다. 제안된 태양광 발전시스템은 태양광 모듈, 에너지저장시스템, 전력변환장치 등으로 구성되었으며, 본 시스템의 적용 가능성을 확인하기 위해 전력전자프로그램을 통해 시스템을 모델링하였으며, 시뮬레이션을 실시하였다. 또한, 실제 선박에 적용하기 위한 타당성 검증을 위해 경제성 분석을 실시하였으며, 약 11년 이후 경제성 부분에서도 유의미한 결과가 도출됨을 확인할 수 있었다.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1134-1144
• /
• 2018

세탄가는 경유의 품질기준 중 하나로써 디젤엔진에 사용되는 경유 연료의 착화성을 평가하는 항목이다. 세탄가 기준은 현재 자동차용 경유 기준으로 52 이상이며, 일반적으로 세탄가가 높으면 시동성이 좋고 운전이 원활해지나 지나치게 높으면 연소가 불균일해져 매연의 원인이 되고 연료소비량이 증가한다. 현재 국내의 품질시험방법에 규정되어있는 세탄가 측정방법은 CFR엔진을 이용한 세탄가분석, 경유의 밀도와 증류유출온도를 통하여 세탄가를 산출하는 세탄지수, CFR엔진의 단점을 보완하여 고온에서 연료의 연소되는 시간을 통해 세탄가를 측정하는 유도세탄가 등이 있다. 본 연구는 이러한 세탄가를 정유사별, 하 동절기별 시료를 확보하고 이를 분석하여 다양한 인자들에 의한 세탄가 측정방법의 상관관계에 대하여 분석하였다. 이를 통하여 세탄가, 유도세탄가, 세탄지수 순으로 세탄가가 높게 측정 되는 것을 확인하였고, 이를 통하여, 현재 편의성을 이유로 많이 사용되는 세탄지수로 인하여 세탄가 품질미달이 발생할 수 있기 때문에 이에 대한 추가 연구가 필요할 것으로 보인다.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.418-426
• /
• 2015

Recently, shipping operators have been making efforts to reduce the fuel cost in various ways, such as trim optimization and bulb re-design. Furthermore, IMO restricts the hydro-dioxide emissions to the environment based on the EEDI (Energy Efficiency Design Index), EEOI (Energy Efficiency Operational Indicator), and SEEMP (Ship Energy Efficiency Management Plan). In particular, ship speed is one of the most important factors for calculating the EEDI, which is based on methods suggested by ITTC (International Towing Tank Conference) or ISO (International Standardization Organization). Many shipbuilding companies in Korea have carried out speed trials around the Korea Straits. However, the conditions for these speed trials have not been exactly the same as those for model tests. Therefore, a ship’s speed is corrected by measured environmental data such as the seawater temperature, density, wind, waves, swell, drift, and rudder angle to match the conditions of the model tests. In this study, fundamental research was performed to evaluate the ship resistance performance due to changes in the water temperature and salinity, comparing the ISO method and numerical simulation. A numerical simulation of a KCS (KRISO Container ship) with a free-surface was performed using the commercial software Star-CCM+ under three conditions that were assumed based on the water temperature and salinity data in the Korea Straits. In the simulation results, the resistance increased under low water temperature & high salinity conditions, and it decreased under high water temperature & low salinity conditions. In addition, the ISO method showed the same result as the simulation.

• Journal of Biosystems Engineering
• /
• 제39권3호
• /
• pp.158-165
• /
• 2014

Purpose: The objective of this paper was to compare test standards regarding the performance and safety of agricultural tractors to identify the differences in test conditions, measurement tolerances, and test procedures. Based on the comparison, some recommendations were proposed for possible revisions or improvements to current tractor test standards. Methods: The test standards and codes of major standards development organizations (SDOs), such as the Organization for Economic Cooperation and Development (OECD), the International Organization for Standardization (ISO), the American Society of Agricultural and Biological Engineers (ASABE), EC type approval, and the board of actions of the Nebraska Tractor Test Laboratories (NTTL), were selected and analyzed. Comparison of the test standards: The ISO provides references for fuel and lubricants for tractor tests, and the OECD provides additional measurements for calculating fuel consumption characteristics during the power take-off (PTO) tests. The ISO, EC type approval, and the ASABE provide PTO protective device and the safety requirements. During drawbar power tests, seven transmission ratios are selected for fully automatic transmissions, according to the OECD. In case of hydraulic lift tests, ISO 789-2 and OECD Code 2 advise the use of a static lift force, while SAE J283 advises the use of additional dynamic lift capacity tests for a better representation of in-field operations. The OECD, the ISO, and EC type approval determine the seat index point (SIP), whereas the ASABE determines the seat reference point (SRP) for roll-over protective structure (ROPS) tests. Diversified measurement tolerances were among the braking performance test standards. The European Union (EU) has developed daily limits for vibration exposures with adaptations from ISO 2631-1. Electromagnetic compatibility evaluations are emerging of high-efficiency tractors due to the long-term conformance to electromagnetic emissions and interferences. Comparisons of tractor test standards discussed in this paper are expected to provide useful information for tractor manufacturers and standards development personnel to improve the performance and safety test standards of tractors.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1017-1024
• /
• 2010

Under the Kyoto Protocol many countries have been requested to participate in emissions trading with the assigned $CO_2$ emissions. In this environment, it is inevitable to change the system and market operation in deregulated power systems, and then ensuring safety margin is becoming more important for balancing system security, economy and $CO_2$ emissions. Nowadays, available transfer capability (ATC) is a key index of the remaining capability of a transmission system for future transactions. This paper presents a novel approach to the ATC evaluation with $CO_2$ emissions using multi-objective particle swarm optimization (MOPSO) technique. This technique evolves a multi-objective version of PSO by proposing redefinition of global best and local best individuals in multi-objective optimization domain. The optimal power flow (OPF) method using MOPSO is suggested to solve multi-objective functions including fuel cost and $CO_2$ emissions simultaneously. To show its efficiency and effectiveness, the results of the proposed method is comprehensively realized by a comparison with the ATC which is not including $CO_2$ emissions for the IEEE 30-bus system, and is found to be quite promising.