• Fashion & Textile Research Journal
• /
• v.13 no.1
• /
• pp.116-129
• /
• 2011

The purpose of this study is to research on changes of body surface according to golf movements in designs of golf slacks pattern and reflect it to designs of golf slacks pattern to enhance adaptability. For the first stage of this study, length of body surface was analyzed by using 3D body shape. In second stage, analysis of wearing test of golf slacks is performed to extract major pattern design factor of golf slacks and then research patterns were designed. In third stage, 4 differently designed 1st, 2nd slacks were used for analysis of 3D Clothing air volume. The results of this research is as follow. The variation rate of body surface length according to golf swing posture resulted the longest on back swing posture and follow through posture. Waist circumference-omphalion, thigh and ankle circumference increased more than 10% of body surface during golf swing. Front waist circumference-omphalion, right waist to hip length, left waist to hip length and right back center length were decreased more than 10%. As a result of analysis on measurements of 1st slacks pattern design, waist front center getting in values, waist front center going down value, front hip width, and front crotch extension had similar industrial pattern design. Back center line angle, back crotch extension, and knee center point~back waist center point had significant differences. The designs and ease proposed for golf slacks pattern in this study are waist circumference 75.5 cm(1.8 cm, 2.38%), hip circumference 95 cm(2 cm, 2.11%), crotch length(front: -0.8 cm, -1.25%; rear: -1.8 cm, -2.83%), slacks length 96c m, gradient of C.B.L $10^{\circ}$, crotch extension (back 9.2~10.4 cm, front 3.2 cm).

• The Research Journal of the Costume Culture
• /
• v.14 no.5
• /
• pp.699-714
• /
• 2006

The purpose of this study is to suggest a methodology to grasp the design method of industrial slacks pattern for women in their early twenties. The result of this study is as follows: 1. The result of the questionnaire showed that the design of rear center gradient was most important and the rear center gradient was designed by shifting waist line and hip line to a suitable degree.; below the waist by 4cm, the girth was measured and the ease of $0{\sim}1cm$ was applied to it, and the ease of hip girth was $3.2{\pm}1.2cm$, and rear center gradient was $2.2{\pm}1cm$, and front crotch extension was $2.8{\pm}0.5cm$, while rear crotch extension was $6.3{\pm}0.5cm$. 2. By comparing rear center gradient which was selected as an important design item with total crotch length and hip girth, I selected industrial pattern and educational pattern, and evaluated them on human bodies. In the result of ANOVA analysis, there were meaningful differences in 8 items: the ease of front waist girth, the ease of front abdomen, the ease of front hip girth, rumples in the side lines, the location of rear waist line, etc. 3. The design method of slacks pattern suitable for women in their early twenties was suggested as follows: the location of waist girth is below waist by $2.5{\sim}3cm$; the ease of waist girth is $0{\sim}1cm$; the ease of hip girth is $2{\sim}3cm$; total crotch length is body size - 5cm; rear center gradient is $2.5{\pm}0.5cm$; rear crotch extension is $7{\pm}0.5cm$; front crotch extension is 3cm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.741-751
• /
• 2009

In order to design and develop the various silhouette of pants pattern for standardized pants patterns, this study is to classify the pants style by the silhouette and to characterize each pants pattern which are classified. Recent 37 ready-made pants patterns of various style were collected in order to analyze their silhouette from April to July 2007. Measurement of each region of the pants pattern were compared and analysed. After analyse the standard deviation, coefficient of variance, minimum, maximum, range about the measurement of each region of the pants pattern, major pattern design factors were extracted. Five major factors are the angle of center front line and center back line, the crotch extension, the position of center back line against center front line, the curvature of center back line, and amount of waist dart. As a result, pants style were grouped as the culottes, formal, basic and tight style after considering the extracted design factors, and analysing correlation, degree of dispersion of the measurement by part. As the silhouette of pants classification from culotte to tight, the fits are closer to the figure, crotch depth increases, crotch extensions are shorter, and angle of the center back increases. The shape of the connected front and back center lines is U-shape for culotte and is closer to V-shape as the silhouette becomes tight.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.4
• /
• pp.1-16
• /
• 2020

This study focused on front-blouse-type skirts from the 15th and 16th centuries and aimed to investigate their formative characteristics and wearing patterns. Previous studies, literature, records, paintings, and excavated clothing items were used as research materials. The researcher categorized front-blouse-type skirts into three types based on the construction method. The first has the front-center portion of the skirt folded up, the second has the center portion cut short, and the third has horizontal dart pleats on either side. An examination of 48 items from 18 excavation sites of front-blouse-type skirts showed that only the front-center portion folded up type appeared in the 15th century, and it was only in the 16th century that the other forms of skirts were worn. Finally, based on the analysis, the pattern of wearing front-blouse-type skirts and their changing factors was deduced. Front-blouse-type skirts were identified as ceremonial skirts that were popular in the 15th and 16th centuries among the types of long skirts available. The popularity and usage of this type of skirt began to spread gradually in the 15th century. In the 16th century, various types of front-blouse-type skirts were brought into vogue by the royal family and the external register. It can be inferred that the popularity of front-blouse-type skirts gradually declined in the 17th century as other types of long skirts, folding skirts, and Sran type skirts emerged.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.577-586
• /
• 2000

The objectives of this study were to develope slacks basic block to be used for improving the attactive silhouette and bodily fitness in ready-to-wear and educational patterns. The subjects were from 20 to 24 years old and twenty six body measurements were taken on the National Anthropometric Survey of Korea in 1977. The women in 20's think ideal body shapes are high stature, long legs, slander waist, hip, abdomen, thigh, ankle and light weight. And so it needs to be studied to studied to make slacks pattern which show slander girth and long length. The study was carried out by the following procedures. 1. Through the comparative investigation on the conventional slacks patterns of System M. Muller & Sohn, Secolli, 文化's in Japan, and Won-ja Rim's and the clothing experiment, the characteristics of every four patterns were found. 2. According to the center back slant, reflecting the change of waist circumference, thigh circumference, back crotch length, and the new suitable slacks pattern was achieved. 3. The sensory evaluation for appearance and comfort was applied to evaluate the new slacks pattern by comparing with the conventional slacks pattern. From the result of the sensory evaluation, it was found that the new slacks pattern was more suitable for appearance. 4. The new slacks pattern for women in their 20's were developed as follows ; The waist line came down 2 ㎝, the waist circumference was plus 2㎝ than originally, and the back hip circumference was larger 1 ㎝ than the front hip, the slacks length was created stature/8×4.9, the knee length was stature/8×2.7. The center back crotch length was interspaced 1∼1.5㎝ at the center front, and was at right angle the point which was raised 5㎝ at the side front. This size is not the absolute size but it helps to make the surplus on any other ready-made slacks for women.

• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.9-18
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount of the chaange of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone. 2) As for the change of the standard line according to the movement, we found that the waist line, the center front line, the center back line, the bust width line, the upper back width line and the back width line became longer. Special consideration must be given to the function of the clothing for an abnormal type of figure. 3) The difference of the measurements between the cubic cutting and the body measurement regardless of the body movement is due to a gap by an acute angle at the jutted place between the developed pattern and the body surface. We found that the body measurement of the upper back width line, the back width line and the bust line became larger. Consequently, in making an original clothing pattern, it is desirable that we must not place the front and the back waist darts at the jutted place on the back from the functional and the aesthetic viewpoint of clothing. It is also desirable that we must widen the neckhole because the shoulder angle is close to a straight line due to a jut of the upper back width line.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.17-28
• /
• 1999

This study was to analyze factors of the body form and factors of bodice pattern through a surface developement figure for the tight bodice pattern design. Fifty replicas of the trunk surface were made by applying a surgical tape method of female subjects between 18 and 24 years old. The result was as follows: 1. The gaps between direct measurements and measurements of the surface development figure were regarded as allowances for the tight bodice pattern. 2. There are four factors of body form selected by factor analysis. The 1st factor signifies th degree of fatness in the upper body. The 2nd factor signifies the length of the upper body. The 3rd factor signifies the part of the front shoulder. The 4th factor signifies the part of the neck. 3. There are high correlations between center back line of the surface development figure and back length line side line front length line back neck depth back upper chest depth. There are high correlations between back bust line of the surface development figure and back interscye breadth line back upper chest line back armhole line. There are high correlations between front bust line of the surface development figure and front upper chest line front interscye breadth line front armhole line front neck breadth 4. The regression expressions of measurements of the surface development figure of the upper body were analyzed as(Fig. 3).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.169-181
• /
• 2016

This study analyzed the characteristics and patterns of men's drawers panties to get basic data for their design. For this, drawers panties in 7 different brands (4: domestic brands, 3: imported brands) in terms of a front-center shape were collected, and the shape of men's drawers panties, characteristics of the materials, dimensions & type of patterns by the part and front-center patterns were analyzed. The study results found the followings: First, in terms of the shape of men's drawers panties, the front-center part were designed to rest the penis and scrotum in a natural and comfortable manner without a pee slit. They were seamless on the sides except for one product with side seams. Second, the drawer panties were made of elastic polyurethane materials. Specifically, domestic brand items used warm, elastic and durable nylon, polyester and rayon and polyurethanes while imported brands were mostly made of absorbent and sanitary polyurethanes. Third, regarding a size of drawer panties by part, imported brands were large in waist circumference. In terms of waist breadth at the front center, there was difference depending on an oval type. In addition, the front length at the front center differed by product, revealing difference in three-dimensional effect at the front center. The side length also differed greatly by product, which means that there might be a great difference in wear comfort. Fourth, in terms of the patterns of men's drawers panties, there was difference in side seams, center back seam and front-center patterns. Among a total of 7 products, only one product had side seams, and center back seams were found in two products only. Fifth, in terms of front-center patterns, the drawer panties can be divided into three types, creating three-dimensional effect not to give any pressure on the crotch: i) the cutting line only at the bottom of the front center part where the penis is rested, ii) puff created at the front center by adding a transverse line to the center line, iii) cutting transverse line to separate the penis from the testicles.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.1-14
• /
• 2015

This study mainly analyzes that designing patterns of an adult women Jeogori that takes advantage of patterns from each textbooks and complements the disadvantages based on the analysis of data from the dress evaluation and comparison of materials. The modification of a size specification is needed for the standard body as an adjust of the length of Jogori between front and back, mediation for bust width between front and back, a movement for the based line of Sup and Godae. As a result, the suitable pattern according to the standard somatotype is as below. Jeogori Length of front is determined by the length of back which was measured from side neck point to bust point plus three centimeters, and give three and half centimeters more in front. This three and half centimeters is for the curved in front of your body due to the chest. Bust width of front and back have to show the differences of human body. Bust width of front is calculated as bust girth into quarters and add two centimeters. Bust width of back gives one centimeter behind the curve from the center line in order to reduce the floating phenomenon. So, the amount of center back line dart is one centimeter. Arm hole girth measures as dividing bust girth into four. Also, Goedae width has two methods to measure. First, divide bust girth into ten equal parts and subtract 0.5 centimeters from it. Second, measure neck girth and divide it by four. Sleeve length is equal to Hwajang minus bust width of front. Hand wrist calculates in using bust girth. Make bust girth into quarters and multiply three fifths. Side line measures as deducting from Jeogori length of back to Arm hole girth and multiply two thirds.