• KIEAE Journal
• /
• v.10 no.3
• /
• pp.51-56
• /
• 2010

The sound insulation performance is one of the important factor that determined the amenity of housing life in residential building. Especially, Apartment house represents a korea habitation. So the importance of privacy and noise problems between habitable rooms are emphasized in these habitation. This study investigates and find a problem of sound insulation performance of partition wall of the apartment house in current state. The measurements were carried out in apartment house with and without a stair hall. And the measurements also carried out in current state and installing a sound absorbing material in receiving room and changing a front door and installing a inner door. In spite of the same partition wall, difference results were showed according to the stair hall. It is appeared that sound insulation performance without stair hall is 6-7dB(Dw) higher than that with stair hall. In case of without stair hall, sound insulation performance is Dw 49 for single number quantity for airbone sound. And In case of changing a front door and installing a inner door sound insulation performance is Dw 57 for single number quantity for airbone sound. The Results of measuring on the changes a front door and installed a inner door indicated that the flanking sound through front door influenced the sound insulation performance.

• Transactions of Materials Processing
• /
• v.20 no.7
• /
• pp.512-517
• /
• 2011

TRB(Tailor Rolled Blank) is an emerging manufacturing technology by which engineers are able to change blank thickness continuously within a sheet metal. TRB door inner panels with required larger thicknesses can be used to support localized high loads. In this study, the aluminum alloy 5J32 TRB sheet is used for a door inner panel application. The TRB material properties were varied by using three heat treatment conditions. In order to predict the failure of the aluminum TRB during simulation, the forming limit diagram, which is used in sheet metal forming analysis to determine the criterion for failure, was investigated. Full-field photogrammetric measurement of the TRB deformation was performed with an ARAMIS 3D system. A FE model of the door inner panel was created using Autoform software. The material properties obtained from the tensile tests were used in the numerical model to simulate the door inner of AA 5J32 for each heat treatment condition. After finite element analysis for the evaluation of formability, a prototype front door panel was manufactured using a hydraulic press.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.31-36
• /
• 1997

Various methods of finite element modeling for welded part are examined and the stamping simulation of automotive body is presented by using the explicit finite element code PAM-STAMPTM. The process of stamping simulation is suggested step by step, and then the gravity, binder wrap, forming, trimming and springback of front door inner are analyzed. It shows good agreements with real product in the aspects of deformed shape and failure area. The door inner with laser-tailor welded blank is simulated, in which deformed shape, movement of welde line and formability are predicted.

• Transactions of Materials Processing
• /
• v.26 no.1
• /
• pp.55-62
• /
• 2017

This paper proposes the process to develop a light-weighting automotive door assembly using high strength steel with low cost penalty. In recent years, the automotive industry is making an effort to reduce the vehicle weight. In this study, inner panels for automotive front door using thinner sheets and quenchable boron steel were designed to reduce the weight of conventional one. In order to evaluate the stiffness properties for the proposed door design, the several static tests were conducted using the finite element method. Based on the simulation results, geometry modifications of the inner panels were taken into account in terms of thickness changes and cost saving. Furthermore, a prototype based on the proposed design has been made, and then static stiffness test carried out. From the results, the proposed door is proved compatible and weight reduction of 11.8% was achieved. It could be a reference process for automotive industry to develop the similar products.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.570-575
• /
• 2008

Flows are studied to understand the flow structure in the narrow region that any experimental approaches are hard to access, Effects on the vehicle commodities from the flows are anticipated in the point of aerodynamics and aero-acoustics. PowerFLOW, which was well validated commercial software, was used to simulate the flow field in the small region, for example, the inner region of the fender panel, the inner region around the front door and the inner region of the trunk lid. Flows in the narrow region could be origins of door sealing problem and dust piling problem.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.586-593
• /
• 1998

In recent automotive industries there has been significant increase in applications of computer simulation to the manufacturing of stamping dies for inner and outer body panels which greatly affect durability and aesthetic quality of automobiles. Enhancement of die quality and reduction of total die manufacturing time and consequently manufacturing cost are the visible outcome. However to successfully apply the result of simulation by a commercial package to the die manufacturing development of an optimal die manufacturing process is required upon the completion of analysis of forte and shortcoming of available sheet metal forming softwares. Based on the results of numerical analysis of front door outer panel forming. this paper evaluates the applicability of simulation results to the real die manufacturing for automotive body panels. Also it attempts to select an optimal die manufacturing process including design machining and tryout. Lastly it discusses the expected effects by adopt-ing the selected process in a real stamping die manufacturing facility.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.33-40
• /
• 1998

In recent domestic automotive industry, applications of computer simulation to the manufacturing of stamping dies for inner and outer body panels which greatly affect durability and aesthetic quality of automobiles, have been increased. Enhancement of die quality, and reduction of total die manufacturing time and consequently manufacturing cost are the visible outcome. However, to successfully apply the result of simulation by a commercial package to the die manufacturing, development of an optimal die manufacturing process is required upon the completion of analysis of forte and shortcomings of available sheet metal forming softwares in the market. Based on the results of numerical analysis of front door outer panel forming, this paper evaluates the applicability of simulation results to the real die making for automotive body panels. Also, it attempts to select an optimal die manufacturing process including design, machining and tryout. Lastly, it discusses the expected effects by adopting the selected process in a real stamping die manufacturing facility.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.6
• /
• pp.54-63
• /
• 1999

Considering that rural village had evolved through a long-sustained effort of harmnization with nature, there should be the wisdom not only to reflect the level of rural resident's housing demand, but also to conserve the traditional characteristics of high-valuation in the modern rural housing. In Korea , standard design proposals of rural houses had been made public three times ; in 1972 , 1984 and 1995. so , firstly, this study analysed the inner-space layouts of design proposals mentioned above, from which changes and problems in the past housing design were derived. And also, through, the positive acceptance of residents' opinion living inthe houses built by standard design proposals in 1970 ~1980's, improved design principles and an alternative model were proposed , finally. The inner-space structed of standard design proposals in 1970s was originated from small-scaled and low-priced one, basically under the " open system". In 1980s, the basic design principle changed to the 'closed system' in which the living room being the focus of indoor family life, and , in 1990s, progressively, therural housing developed to the high qualified type by the spatial enlargement and with increased equipements. However, this structural change of rural house brought about the problem of functional separatioon between farming and daily living activities. In details, limited spaces of multipurpose spaces and sanitary facility would be mentioned as problems for improvement. conclusively in this study, newoly arranged "open system" was recommended , as a basic design principle for theinner space structure formation of rural house, which easily links the constituent inner-house spaces to outer one. Based on this principle, the detailed design criterial was proposed as follows ; 1. The living room be directly linked to the front-yard and centrally placed, the addtional space of which could be secured for the special family events by the flexibleuse of its adjacent room or by the housing of male quarters(separated from main building quarter). 2. The kitchen also be directly linked to side-yard and to livng room , for the convenience of farming activities and the shortening of path flow housewife. 3. The expanded toilet-and-bathroom be placed in the directly connected left-hand side to the living room and also be allowed access through multipurpose spaces to out door. 4. The multipurpose spaces be directly connected to the kitchen and the toilet and-bathroom , of which function would be for undressing of working clothes, quickwashing and ordinary working.nd ordinary working.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.135-152
• /
• 2015

The purpose of this study is to explore the role of deconstruction and creative destruction in Maison Margiela’s fashion design code, which has opened the door to a new wave of innovative design since 1988. Using a combination of theoretical analysis, precedent research, and a review of existing literature, five years of Maison Margiela's works (2010-2014) were evaluated. The analysis shows that Maison Margiela’s Design Code consists of the following key elements: Addition, Extension, Asymmetry, Elimination, Deconstruction, Complanation, and Inversion. Addition refers to act of attaching additional pieces of fabric or clothing on the existing piece. Extension refers to the act of extending the design elements, such as their position or features. Asymmetry means the irregular positioning of left-to right and front-to-back length and features. Deconstruction could be seen in intentionally frayed sleeves, open seams, and tears in the cloth. The element of Elimination was evident in the removal of key pieces of clothing such as a coat, pants, blouse, and a jacket. Complanation refers to the reversion to a two dimensional contemplation of the human form rather than the more obvious 3-dimensional form. Finally, Inversion was used by displaying an inner layer of clothing on the outside or exposing seams or zippers in a way that people are not accustomed to seeing. It also meant that the order of wearing clothes was sometimes inverted, so external layers would be worn within clothing that are traditionally underneath. Maison Margiela’s creations represented a break

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.160-171
• /
• 2018

This study aims to find an original form of temple flower decoration patterns, considering floral lattice pattern as a view element composing temple landscape. To that end, we analyzed and interpreted the form and symbol expressed in the floral lattice pattern at Nahanjeon of Seonghyel Temple at Yeongju, Gyeongsangbukdo. The front side of Nahanjeon windows shows a sculpture with 176 pure patterns in a form where two squares are in sequence. The basic concept of main front door (the inner gate of Nahanjeon) frames is considered the design language of lotus pond that symbolizes "square land" in traditional gardens. The four leaf clover and arrowhead are water plants discovered in areas nearby ponds, which are a realistic expression conforming to the water ecology of lotus pond. The lotus, which is the most important plant at the main front door, indicates purity, a non-stained state, and the world of the lotus sanctuary, which is the land of blissful happiness in Buddhism. The lotus expressed in the floral lattice pattern is spread in a diverse form, containing the features of creation and destruction, showing the landscape character of the "One Body of Buddha and Lotus". The expression of flying birds such as kingfishers and egrets is an ecologically aesthetic idea to infuse dynamism and vitality into a seemingly static aquatic ecosystem. The floral lattice pattern contains lotus pond scenery showing symbiosis of animals(i.e., dragons, frogs, crabs, fishes, egrets, wild geese, and kingfishers) and plants(i.e., four leaf clovers and arrowheads), which are symbols of relief faith for longevity, wealth, preciousness, and many sons. The pattern is not just an ecological aesthetic expression but a holistic harmony of ecological components such as growth and disappearance of lotus and its leaves, fitting habitats, symbiosis, and food chain.