• Journal of Preventive Medicine and Public Health
• /
• 제53권5호
• /
• pp.362-370
• /
• 2020

Objectives: Despite greater access to training positions and the presence of more women in emergency medicine, it has remained a men-dominated field. This study aims to identify the key issues causing the gender gap in Korea and establish measures to overcome them. Methods: Using the annual statistical reports of the National Emergency Medical Center and data published on the Korean Society of Emergency Medicine website, cases that listed the current status and positions of members in its organization and its committees were analyzed. Secondary analysis was conducted using data from the 2015 Korean Society of Emergency Survey that included physicians' demographics, academic ranking, years of experience, clinical work hours, training and board certification, core faculty status, position, and salaries. Results: As of September 2019, women account for only 12.7% of the total number of emergency physicians (EP) in Korea; of 119 chair/vice-chair academic positions, women represented only 9.2%. Women EP were more often assistant professors and fellowship-trained, with fewer in core faculty. However, they worked the same numbers of clinical hours as their men counterparts. The median annual salary of women EP was less than that of men EP after adjusting for academic hospital rank, clinical hours, and core faculty status. Conclusions: A gender gap still exists among Korean EP, and women earn less than men regardless of their rank, clinical hours, or training. Future studies should evaluate more data and develop system-wide practices to eliminate gender disparities.

• Journal of the Korean Graphic Arts Communication Society
• /
• 제20권2호
• /
• pp.31-43
• /
• 2002

Screen printing is a stencil process whereby ink is transferred to the substrate through a stencil supported by a fine fabric mesh. Therefore screen had a tendency to distort and swell, as ink was deposited between the fibers, and were difficult to clean. The tow importance of stencil parameters that affect print quality are stencil thread diameter and the fabric thickness because of their influence on both ink deposit and print definition. Since screen printing inks can be formulated to adhere to almost any surface, and the printing process itself can be handled almost any substrate in a wide variety of shape, screen printing is a very versatile process. The small size pronting is reproduced image used screen printing because the surface of substrates is not suited at screen printing method. In screen printing, the need of high definition printing is gradually increasing according to developing special inks. A conventional haftone, so called AM screening, is simple and easy to implement, but the haftone dot patterns by using this method are not free for the moire fringe. This paper is used densitometry and image analysis to investigate relation with printing according to screen mesh, opening size and resolution of copy in image reproduction used FM screen. We had the good result of dot gain and tone reproduction on the screen printing of high definition using FM screen.

• The Journal of Korean Academy of Prosthodontics
• /
• 제33권1호
• /
• pp.130-143
• /
• 1995

The purpose of this study was to analyze the magnitude and distribution of stress using photoelastic model with the rigid connection using T-block attachment and non-rigid connection using key & keyway attachment. The vertical load of 16 Kg was applied on the central fossa of the tooth, the pontic and the implant, and the pattern and distribution under each condition was analyzed. The following results were obtained : 1. In case of vertical load on the central fossa of the implant, the stress was concentrated at the apex of the implant involving the mesial alveolar bone in both fixed partial denture with the rigid connection and that with the nonrigid connection and the stress concentration at the mesial cervical area of the implant was a little more in the nonrigid connection than in the rigid connection. 2. In case of vertical load on the central fossa of the pontic, the stress was concentrated at the apex of 2nd bicuspid in both 3 unit fixed partial denture with nonrigid connection and that with the rigid connection. The stress was more concentrated at the mesial alveolar bone of the implant, but the stress distribution at the natural teeth more favorable at the rigid connection than at the non-rigid connection in case of 4 unit fixed partial denture. 3. In case of vertical load of the central fossa of the 2nd bicuspid, much stress with 3 fringe order was observed at the apex of the 2nd bicuspid in the 3 unit fixed partial denture, but relatively even stress distribution was observed at the apex of the implant, the 1st and 2nd bicuspid, and the adjacent cuspid in the 4 unit fixed partial denture.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.59-66
• /
• 2001

The tremendous growth of population and physical development in the largest urban agglomeration in Indonesia -the Jakarta Metropolitan Region, also known as Jabotabek (Jakarta, Bogor, Tanggerang, Bekasi)- has created many environmental problems, such as land use conversion, increasing urban temperature, water and air pollution, intrusion of seawater, and flooding. These problems have become more serious as the urban green space (trees, shrubs, and groundcovers) has decreased rapidly with the urbanization process. Urban green space directly benefits the urban environment through ameliorating air pollution, controlling temperature, contributing to the balance of the hydrological system, and providing space for recreation and relaxation. Because there is little hard data to support the claim of decreasing greenery in Jabotabek, it is necessary to measure the amount of urban green space. The paper describes the spatial analysis of urban green space within Jabotabek through the use of a geographical information system (GIS). We used GIS and remote sensing to determine land cover change and predicted greenery percentage. Interpretation of Landsat data for 1972, 1983, 1990, and 1997 showed that Jabotabek has experiences rapid development and associated depletion of green open space. The proportion of green open space fell by 23% from 1972 to 1997. We found a low percentage of urban green space in the center of Jakarta but a high percentage in fringe area. The amount of greenery is predicted by the Ratio Vegetation Index (RVI) model: predicted greenery (%) = [146.04] RVI - 134.96. We consider that our result will be useful for landscape planning to improve the environment of Jabotabek.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제12권3호
• /
• pp.142-163
• /
• 2009

Taebaek city is located in the mountainous plateau area therefore the major industry was coal industry. According to dramatically declining of the major industry, Taebaek city is need to alternative industry which associated with considering the geographical characteristics of natural tourism resources for increasing the local economy. On the basis of these reasons, this study can be suggested ecological planning and mitigation of deterioration technique about the these study site. That is the reserved area for mountainous experience theme park. As the results of environmental ecology assessment are following as; The natural ecosystem areas, multi-layer structure forest such as forest of Pinus densiflora, forest of Quercus mongolica and deciduous forest have a high value of nature, diversity and potential. In addition, wild bird habitats were important area as a inhabitation, breeding, feeding and hiding. Therefore, on these areas should be preserved. Also, it needs to conserve on there such as more than three types of wild bird inhabitate areas, the fringe of high biological diversity, the wetland that have got good vegetation condition and the function of amphibia, reptiles crossing. In addition, inhabitation, the waterway of wetland form that have got wide waterside width needs to conserve. In conclusion, on the basis of analysis results such as conditions of plan, environment, ecological assessments, survey informations are able to suggest the connectivity of the axis of forest and management plan. Moreover, in the part of forest restoration plan, we suggest the plan of transplant for a compensation of damaged forest by land use.

• Journal of Agricultural Extension & Community Development
• /
• 제26권3호
• /
• pp.165-179
• /
• 2019

This study aims to examine the difference in the rurality of rural villages near a metropolitan city. It investigated the general status and economic activities of the two villages near Ulsan Metropolitan City to find out what the differences are and to diagnose the reasons for such differences and their impact on future changes in the villages. Through this survey analysis, it found that the two villages have been continuously experiencing a decrease in population over the last 10 years, despite being near large cities. In addition, it also identified the characteristics of the agricultural and livestock industries taking center stage in economic activities. In other words, although the cases are rural villages near a big city, it was shown that the village near a provincial city is basically based on agricultural characteristics. Regarding future prospects, on the one hand, in the case of Dagae-ri, the villagers expect that the current livestock industry-oriented activities may continue to develop. On the other hand, in the case of Shinhwa-ri, the residents think that the rural characteristics may be rapidly lost and urbanized. Based on these findings, this study suggests that rural policies for villages near large cities also need to be applied in a discriminatory manner, taking into account the basis on which economic activities in the villages are developed.

• Journal of Broadcast Engineering
• /
• 제24권3호
• /
• pp.452-462
• /
• 2019

A digital hologram, which is one of the next generation visual systems, can be generated and displayed in various formats, and a digital hologram is created in accordance with the characteristics of the system for display. Diffraction efficiency can be used as a measure of the characteristics of digital holograms generaged under various conditions in various display environments. In this paper, diffraction efficiency for computer-generated hologram (CGH) under various conditions was measured. This paper discusses the generation conditions that should be considered in hologram display. We compared each condition by measuring the intensity of the first order diffraction pattern of the fringe generated under the Fresnel condition for the phase hologram. Through this paper, we showed the tend about characteristics of the diffraction efficiency according to object point, reconstruction distance, laser and SLM.

• Steel and Composite Structures
• /
• 제30권2호
• /
• pp.81-96
• /
• 2019

The behavior of a new Three-Tube Buckling-Restrained Brace (TTBRB) with circumference pre-stress (${\sigma}_{{\theta},pre}$) in core tube are investigated through a verified finite element model. The TTBRB is composed of one core tube and two restraining tubes. The core tube is in the middle to provide the axial stiffness, to carry the axial load and to dissipate the earthquake energy. The two restraining tubes are at inside and outside of the core tube, respectively, to restrain the global and local buckling of the core tube. Based on the yield criteria of fringe fiber, a design method for restraining tubes is proposed. The applicability of the proposed design equations are verified by TTBRBs with different radius-thickness ratios, with different gap widths between core tube and restraining tubs, and with different levels of ${\sigma}_{{\theta},pre}$. The outer and inner tubes will restrain the deformation of the core tube in radius direction, which causes circumference stress (${\sigma}_{\theta}$) in the core tube. Together with the ${\sigma}_{{\theta},pre}$ in the core tube that is applied through interference fit of the three tubes, the yield strength of the core tube in the axial direction is improved from 160 MPa to 235 MPa. Effects of gap width between the core tube and restraining tubes, and ${\sigma}_{{\theta},pre}$ on hysteretic behavior of TTBRBs are presented. Analysis results showed that the gap width and the ${\sigma}_{{\theta},pre}$ can significantly affect the hysteretic behavior of a TTBRB.

• Journal of Broadcast Engineering
• /
• 제12권1호
• /
• pp.11-27
• /
• 2007

T-DMB(Terrestrial-Digital Multimedia Broadcasting) for portable and mobile broadcasting service was officially launched in the metropolitan area of Korea in December 2005. The development of interactive data services and the expansion of T-DMB network have been now progressed, and the regional T-DMB broadcasters will be selected in the near future. Although it is important to evaluate service area and reduce a fringe area for optimizing RF coverage of T-DMB, there was no professional system to support those works, and therefore lots of resources in budget, manpower and time were required. The measurement considering characteristics of SFN(Single Frequency Network) is essential in the implementation of T-DMB network which needs to control synchronization, spacing and output power of transmitters. In addition, mobile measurement, enough measured parameters for many-sided analysis of reception quality, efficient management of enormous measured data and representation of measured results on the electronic map are also important in evaluating service area. In this paper, we derived requirements for a new measurement system in T-DMB by considering the above details, and we proposed and developed an integrated measurement and analysis system. The developed system was applied to the implementation of T-DMB network of KBS and field tests, and it proved its efficiency and accuracy in result.

• Journal of the Microelectronics and Packaging Society
• /
• 제18권2호
• /
• pp.17-27
• /
• 2011

This paper describes an experimental study and finite element analysis (FEA) carried out for investigating thermal deformation behavior of solders, resulting from temperature change in the solder. With such a goal in mind, a shear specimen that was composed of two metal bars having different coefficient of thermal expansion and solder blocks placed between two bars was designed and fabricated. Two different types of solder blocks, eutectic solder (Sn/36Pb/ 2Ag) and lead-free solder (Sn/3.0Ag/0.5Cu) were tested as well. Fringe patterns for several temperature steps were recorded and analyzed for three temperature cycles using a real-time moir$\acute{e}$ setup. The experimental data was verified with FEA and used to evaluate the suitability for numerous solder constitutive models available in literatures. FEA employing Anand material model suggested by Darveaux et al. and Chang et al. were found to be in an excellent agreement with the experimental results for the eutectic solder and the lead-free solder, respectively. In addition, numerical predictions on bending displacement, shear strain and viscoplastic distortion energy are documented and viscoplastic deformation behavior of two types of solder material are compared.