• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1109-1110
• /
• 2011

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1546-1551
• /
• 2004

The laser Doppler technique is well-established as a velocity measurement technique of high precision for flow velocity. Recently, the laser Doppler technique has also been used to measure acceleration of fluid particles. Acceleration is interesting from a fluid mechanics point of view, since the Navier Stokes equations, specifically the left-hand-side, are formulated in terms of fluid acceleration. Further, there are several avenues to estimating the dissipation rate using the acceleration. However such measurements place additional demands on the design of the optical system; in particular fringe non-uniformity must be held below about 0.0001 to avoid systematic errors. Relations expressing fringe divergence as a function of the optical parameters of the system have been given in the literature; however, direct use of these formulae to minimize fringe divergence lead either to very large measurement volumes or to extremely high intersection angles. This dilemma can be resolved by using an off-axis receiving arrangement, in which the measurement volume is truncated by a pinhole in front of the detection plane. In the present study an optical design study is performed for optimizing laser Doppler systems for fluid acceleration measurements. This is followed by laboratory validation using a round free jet and a stagnation flow, two flows in which either fluid acceleration has been previously measured or in which the acceleration is known analytically. A 90 degree off-axis receiving angle is used with a pinhole or a slit.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.438-440
• /
• 2003

This study is introducing a new approach of ATInSAR hologram for modeling wave refraction spectra pattern. TOPSAR data with L$_{-HH}$ and C-vv bands utilized spatial variation of wave refraction. Based on the phase information in along track interferometry, and ATInSAR hologram the quantitative information such swell wave height and spectra energy have been modeled. The phase information in ATInSAR hologram images can be transferred to wave refraction The ATInSAR hologram can be used to investigate the wave refraction pattern along the coastal waters. The fringe information pattern was shown to be useful in modeling wave refaction spectra varaition. The hologram interferometry wave refraction model consists of two sub-models. The purpose of first sub-model is to determine the swell wave height by using ATInSAR. Second sub-model aims to generate the holographic interferometry from the information of two wave spectra which detected by ATInSAR technique. The azimuth cut-off variations along the fringe patterns will be estimated. As azimuth cut-off contains the wave height information which could be used the significant wave height variation in convergence and divergence zone.

• 한국유기농업학회지
• /
• 제27권3호
• /
• pp.289-306
• /
• 2019

The study is a comparative analysis of the differences in economic activities of two rural villages near the city. It is the general notion that rural villages near large cities lose the characteristics of traditional rural villages and change the areas with urban characteristics due to the influence of urbanization. The survey also showed that Munho 4-ri and Jeongbae 1-ri in Gyeonggi-do have urban characteristics, such as population growth, agricultural activity reduction and non-agricultural activity increase, and community activity reduction. However, they also found that there were important differences in the future development patterns of the two villages. In other words, the reasons and purposes of migration of people moving to the two villages, the differences in the system of economic activity in the villages, and the differences in community cooperation are emerging. Therefore, the study shows that policies to develop rural villages near cities need to be implemented differently based on the characteristics of those villages.

• 한국광학회지
• /
• 제11권4호
• /
• pp.232-238
• /
• 2000

백색 시준광의 시준 정도로 정밀하게 측정하기 위하여 두 직선격자나 원형격자에 의한 버니어(vernier) 무아레 무늬를 이용하는 새로운 시준 방법을 제안하였다. 버니아 무아레 무늬의 피치 간격을 측정함으로써 렌즈의 초점 종이동 오차($\Deltaf$), 발산각($\theta$) 및 종색수차 $(L_{ch})$ 를 구하였다. 초점 길이가 120.0mm이고 F/2.4인 렌즈를 사용하여 측정한 결과 $\Deltaf$=2.19mm이고 $\theta$=mm이고 F/1.6 그리고 아베수가 64.1인 렌즈의 종색수차를 버니어 무아레 무늬를 이용하여 측정하였다. 자동초점방법을 이용하여 측정한 결과,$L_{ch}=1.58mm(\pm0.01mm)$와 무아레 간섭법을 이용하여 측정한 결과인 1.59mm($\pm$0.1mm)와 거의 일치함을 알 수 있었다.