• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.36-45
• /
• 2010

본 논문에서는 무아레 광섬유 센서의 활용성을 극대화할 수 있는 다점 측정 기술에 대해 연구하였다. 특히 기존의 무아레 광섬유 센서가 갖는 다점 측정 기술의 한계점을 극복하기 위해 반사형 단일 프린지만을 사용한 신개념의 광섬유 센서를 고안하였으며 이를 통해 다점 측정의 방법을 획기적으로 개선할 수 있게 되었다. 또한 기존의 다점 측정 원리들을 조사하여 이를 바탕으로 본 연구에서 개발한 무아레 광섬유 센서에 적용 가능한 네 개의 다점 측정 모델을 제시하였다. 이 모델은 기본적으로 파장 분할 다점 측정법과 시간 분할 다점 측정법에 기초를 두고 설계 되었으며 특별히 프린지 기반 광섬유 센서와 같이 외적 형태의 광섬유 센서에 적용 가능한 모델로 제안하였다. 최종적으로 제안된 다점 측정 모델들을 실험적으로 검증하기 위해 광학 시스템을 실제로 제작하였고 프린지 광섬유 센서에 적용하여 본 연구에서 제안된 다점 측정법의 기능성을 성공적으로 검증하였다.

• 비파괴검사학회지
• /
• 제19권3호
• /
• pp.200-206
• /
• 1999

광탄성법을 이용하여 인장하중을 받는 곡선보의 중앙에서 하중축과 직교하는 일직선상에 축방향 응력성분을 측정하였다. 광탄성 데이터의 정밀 측정을 위하여 영상처리 시스템을 이용, 원래의 프린지를 명시야 배열과 암시야 배열의 등색선프린지로부터 2배로 증식시키고 세선처리를 하였다. 세선처리된 광탄성 영상으로부터 1/4차수(N=0. 1/4, 2/4. 3/4. 1, 5/4...)마다 프린지 차수를 읽을 수 있으므로 정확한 위치에서 정량적인 측정이 가능하다. 광탄성 실험에서 곡선보의 인장 하중을 3종류로 변화하였을 때 이론식에 의한 응력분포와 일치하는 경향을 나타냈으나, 장탄성법에 의한 측정결과는 이론값과 8%이내의 차이가 나타났다. 이러한 원인은 광탄성 시험편 가공시 하중축과 치수가 이론식에 적용된 조건과 다소 상이한 것으로 판단되며, 정밀하게 가공된 시험편을 사용하여 측정할 경우 실험에 의한 오차는 감소될 것으로 추정된다. 이 실험으로부터 광탄성법에 의한 응력측정시 프린지 증식 및 세선처리 기법을 적용할 경우 정밀한 응력측정이 가능함을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.305-310
• /
• 2004

We have studied the optimal phase retardation value of a homogeneously aligned liquid crystal (LC) driven by fringe-field when using the LC with positive dielectric anisotropy. In general, the transmittance of a homogeneous aligned LC cell under crossed polarizer is maximum when a twist angle of LC by in-plane rotation is 45$^{\circ}$ with polarizer and the cell retardation becomes λ/2. However, the device using the LC with positive dielectric anisotropy does not follow this since the degree of rotation of the LC is dependent on electrode position and in addition the LCs tilt up along the fringe-field. At the center of common and pixel electrode, the LC is most twisted around a middle position of a cell whereas at the edge position of pixel electrode, the LC is most twisted near bottom surface of a cell. Consequently, the optimal phase retardation of the device becomes much larger than λ/2 and the transmittance can be described using the combination of the in-plane switching and twisted nematic mode.

• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.587-597
• /
• 2017

The extraction of the valid measurement region from the interference fringe pattern is a significant step when measuring gear tooth flank form deviation with grazing incidence interferometry, which will affect the measurement accuracy. In order to overcome the drawback of the conventionally used method in which the object image pattern must be captured, an improved segmentation approach is proposed in this paper. The interference fringe patterns feature, which is smoothed by the nonlinear diffusion, would be extracted by the structure tensor first. And then they are incorporated into the vector-valued Chan-Vese model to extract the valid measurement region. This method is verified in a variety of interference fringe patterns, and the segmentation results show its feasibility and accuracy.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2313-2318
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. This is time consuming and requires skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting method for the stress analysis of a curved beam plate. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at 0˚, 45˚, 90˚ and 135˚. Experimental results are compared with those of ANSYS and calculated by the simple beam theory. Good agreement among the results can be observed.

• 한국전기전자재료학회논문지
• /
• 제17권2호
• /
• pp.201-206
• /
• 2004

We have performed computer simulation and experiment to obtain electro-optic characteristics of reflective hybrid aligned nematic (R-HAN) cell driven by fringe field, in which the cell consists of polarizer, optical compensation film, LC layer and reflector. Conventional R-HAN cell driven by fringe field using only the LC layer shows high wavelength dispersion at dark-state and thus viewing angle characteristic is strongly wavelength-dependent. In order to improve this demerit, we added one optical compensation film to conventional R-HAN cell. The display with optimized cell parameters shows low wavelength dispersion at dark-state and exhibits a wide viewing angle without the occurrence of grey scale inversion over a wide range of viewing angles and the contrast ratio greater than 5 over exists about 120$^{\circ}$ in vortical direction and 160$^{\circ}$in horizontal direction. Experimental results show good agreements with theoretical results and fast response time.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.415-422
• /
• 2013

White-light phase-shifting interferometry (WLPSI) is widely recognized as a standard method to measure shapes with high resolution over a long distance. In practical applications, WLPSI, however, is associated with some degree of ambiguity of its phase, which occurs due to a phase delay, which is the offset between the phase of the fringes and the fringe envelope peak position. In this paper, a new algorithm is proposed for the determination of a fringe order suitable for samples in which the phase delay mainly occurs due to noise, diffraction and a steep angle. The concepts of the decouple factor and the connectivity are introduced and a method for calculating the decouple factor and the connectivity is developed. With the phase-unwrapping procedure which considers these values, it is demonstrated that our algorithm determines the correct fringe order. To verify the performance of the algorithm, a simulation was performed with the virtual step height under noise. Some specimens such as step height standard and a column spacer with a steep angle are also measured with a Mirau interference microscope, after which the algorithm is shown to be effective and robust.

• 대한수학회지
• /
• 제53권4호
• /
• pp.847-868
• /
• 2016

Let M be an invariant subspace of $H^2$ over the bidisk. Associated with M, we have the fringe operator $F^M_z$ on $M{\ominus}{\omega}M$. It is studied the Fredholmness of $F^M_z$ for (generalized) zero based invariant subspaces M. Also ker $F^M_z$ and ker $(F^M_z)^*$ are described.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.357-362
• /
• 2010

The joint transform correlator (JTC) has been the best known technique for pattern recognition and identification. This paper proposes a new technique of fringe adjustment by adopting a sinusoidal amplitude-modulated iterative filter convolved with an interference fringe pattern in the joint power spectrum (JPS) domain. The comparison of our new technique and other techniques is presented to show that the newly proposed technique can successfully improve both the correlation peaks and the peak signal-to-noise ratio (PSNR). Simulated results of enhanced interference fringes are also presented.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1982-1989
• /
• 2004

In photoelasticity, the directions of principal stresses are given by isoclinic fringe patterns. In this study, photoelastic theory is represented by Jones calculus and the photoelastic 8-step phase shifting method is described. A feasibility study using computer simulation is done to get isoclinics from photoelastic fringes of a circular disk under diametral compression. Fringe patterns of the disk are generated from the stress-optic law. The magnitudes of isoclinics obtained from the fringe patterns of computer simulation and experiment are compared with those of theory. The results are close between them. Then, the 8-step phase shifting method is applied to get distributions of isoclinics along the specified lines of a cuved beam plate under tensile load. Experimental results obtained from the phase shifting method were compared with those of finite element analysis (ANSYS). It is confirmed that measurement of isoclinic distributions is possible by use of photoelasitc phase shifting method.