• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.51-61
• /
• 1993

본 연구에서는 에너지법으로 축대칭 박판성형 공정을 해석할 때, Lee와 Yang 이 제안한 방법을 적용함에 있어 굽힘효과를 효과적으로 고려할 수 있는 방법을 제안 하고 축대칭 컵드로잉 공정을 해석하여 본 이론의 타당성을 입증하고자 한다. 굽힘 효과는 박판소재를 몇개의 층(layer)으로 나눈 뒤, 각 층에서 소비되는 변형에너지를 합하여 전체 에너지를 최소화시킴으로써 고려하였다. 해석시 펀치 목부분과 다이목 부분에서의 접촉압력은 각각 균일한 분포를 갖는 것으로 가정하였다. 본 이론의 타 당성을 입증하기 위하여 계산결과를 실험치 및 탄소성 유한요소해석 결과와 비교하였 다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.216-224
• /
• 2011

In This study develops a quasi-three dimensional numerical model of wave driven coastal currents with accounting the effects of the wave-current interaction and the surface rollers. In the wave model, the current effects on wave breaking and energy dissipation are taken into account as well as the wave diffraction effect. The surface roller associated with wave breaking was modeled based on a modification of the equations by Dally and Brown (1995) and Larson and Kraus (2002). Furthermore, the quasi-three dimensional model, which based on Navier-Stokes equations, was modified in association with the surface roller effect, and solved using frictional step method. The model was validated by data sets obtained during experiments on the Large Scale Sediment Transport Facility (LSTF) basin and the Hazaki Oceanographical Research Station (HORS). Then, a model test against detached breakwater was carried out to investigate the performance of the model around coastal structures. Finally, the model was applied to Akasaki port to verify the hydrodynamics around coastal structures. Good agreements between computations and measurements were obtained with regard to the cross-shore variation in waves and currents in nearshore and surf zone.

• Steel and Composite Structures
• /
• 제31권3호
• /
• pp.217-232
• /
• 2019

Modular steel buildings consist of prefabricated room-sized structural units that are manufactured offsite and installed onsite. The inter-module connections must fulfill the assembly construction requirements and soundly transfer the external loads. This work proposes an innovative assembled connection suitable for modular buildings with concrete-filled steel tube columns. The connection uses pretensioned strands and plugin bars to vertically connect the adjacent modular columns. The moment-transferring performance of this inter-module connection was studied through monotonic and cyclic loading tests. The results showed that because of the assembly construction, the connected sections were separated under lateral bending, and the prestressed inter-module connection performed as a weak semirigid connection. The moment strength at the early loading stage originated primarily from the contact bonding mechanism with the infilled concrete, and the postyield strength depended mainly on the tensioned strands. The connection displayed a self-centering-like behavior that the induced deformation was reversed during unloading. The energy dissipation originated primarily from frictional slipping of the plugin bars and steel strands. The moment transferring ability was closely related to the section dimension and the arrangements of the plugin bars and steel strands. A simplified strength calculation and evaluation method was also proposed, and the effectiveness was validated with the test data.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.63-70
• /
• 1994

본 연구에서는 다경간 연속교의 내진해석시 가동받침의 마찰을 고려할 수 있는 비선형 동적해석 방법을 제시하고 가동받침의 마찰계수에 따른 연속교의 내진응답을 고찰하였다. 연구결과 국내와 같은 소규모 설계지진시에는 가동받침의 마찰은 마찰계수가 작더라도 에너지 감쇠에 의한 상부구조의 변위감소와 마찰력에 의한 상부구조의 관성력의 각 하부구조로 분배에있어 상당한 효과가 있음을 알 수 있었다. 또한 이러한 가동받침의 마찰효과는 마찰계수가 클수록, 입력지진의 규모가 작을수록 커짐을 보였다. 따라서 경간수가 많고 상부구조의 중량이 큰 다경간 연속교에 있어서 가동반침의 마찰계수를 적절히 사용함으로써 중소규모 설계지진 작용시 상부구조의 수평변위를 조절할 수 있고 상부구조의 교축방향 관성력을 각 하부구조로 분배하는 효과에 의해 경제성과 전체교량의 내진 안전성을 확보할 수 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.5-10
• /
• 2007

Using a reference slurry, ammonium dodecyl sulfate (ADS), an anionic and environmentally friendly surfactant, was investigated as an alternative to BTA for its inhibition and lubrication characteristics. Results demonstrated that the inhibition efficiency of ADS was superior to that of BTA. Coefficient of friction (COF) was the lowest when the slurry contained ADS. This suggested that adsorbed ADS on the surface provided lubricating action thereby reducing the wear between the contacting surfaces. Temperature results were consistent with the COF and removal rate data. ADS showed the lowest temperature rise again confirming the softening effect of the adsorbed surfactant layer and less energy dissipation due to friction. Spectral analysis of shear force showed that increasing the pad-wafer sliding velocity at constant wafer pressure shifted the high frequency spectral peaks to lower frequencies while increasing the variance of the frictional force. Addition of ADS reduced the fluctuating component of the shear force and the extent of the pre-existing stick-slip phenomena caused by the kinematics of the process and collision event between pad asperities with the wafer. By contrast, in the case of BTA, there were no such observed benefits but instead undesirable effects were seen at some polishing conditions. This work underscored the importance of real-time force spectroscopy in elucidating the adsorption, lubrication and inhibition of additives in slurries in CMP.

• 한국해안해양공학회지
• /
• 제8권1호
• /
• pp.28-36
• /
• 1996

조류와 취송류의 비선형 상호작용에 대한 연직확산계수의 영향을 점모형을 이용하여 살펴보았다. q$^2$-q$^2$1 난류모형을 난류운동에너지의 생성과 감쇄가 균형을 이룬다는 가정 하에 단순화한 0-방정식 난류모형을 도입하고 마찰수심의 영향을 적절히 반영하도록 수정하여 연직확산계수를 산정하였다. 0-방정식 난류모형의 유도과정과 전향력 항이 포함됨으로써 공진이 발생될 수 있음을 제시하였다. 왕복성 수면경사력과 바람응력이 복합된 경우, 고려된 바람응력에 의한 조류 진폭의 변화는 무시할만한 크기였으나, 왕복성 수면경사력만에 의해서는 발생되지 않았던 2배조의 조류 성분이 파생되었다. 취송류의 연직구조는 조류에 의한 배경난류가 지배적인지의 여부에 따라 상당한 차이를 보였다. 따라서 황해와 같이 강한 조류가 존재하는 해역의 취송순환을 파악함에 있어 조류에 의한 배경난류를 무시할 경우는 실제와는 상당히 다른 결과가 나타날 수 있다.