• 한국지반공학회논문집
• /
• 제39권3호
• /
• pp.5-16
• /
• 2023

본 연구는 기초판의 연성률이 말뚝지지 전면기초에 미치는 영향을 해석적 연구와 수치해석으로 분석했다. 기초판의 연성률(K_R)과 선단지지 조건에 따른 말뚝과 기초판의 하중 분담률을 분석했다. 각각의 말뚝과 전체적인 응답은 3차원 유한 요소 해석법을 사용하여 분석했다. 본 연구에서 수직 하중이 증가하고 기초판의 연성률이 감소함에 따라 말뚝지지 전면기초의 하중분담비(α_pr)가 감소하는 것으로 나타났다. 이러한 경향은 선단지지 말뚝을 사용하는 것보다 마찰말뚝을 사용하는 경우에 더 뚜렷하게 나타났다. 또한, 연성 기초판의 경우, 하중조건에 따른 말뚝 위치별 축력 분포경향은 큰 차이를 보이지 않았으나, 강성 기초판의 경우, 하중조건에 따라 외곽에 위치한 말뚝 두부 축력이 증가하는 경향을 보였다. 기초판의 침하는 연성 기초판 조건이 강성 기초판보다 더 크게 나타났으며, 이로 인해 연성 기초판 조건에서 하중분담비가 감소하는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제25권9호
• /
• pp.29-43
• /
• 2009

전산기술의 발달과 더불어 좀 더 복잡하고 반복적인 계산을 쉽게 수행할 수 있게 됨으로써 하중전이곡선을 이용한 하중전이해석법이 널리 이루어지고 있다. 현재 국내에서도 하중전이해석법을 많이 사용하고 있다. 그러나 이러한 하중전이해석법에서 사용되는 곡선들은 대부분 외국에서 개발된 곡선들로서 국내지반에서의 적용성 여부는 확실치 않다. 본 연구에서는 타입강관말뚝의 하중전이곡선을 도출하기 위하여 국내 9곳의 현장재하시험 데이터를 수집하였다. 이들을 분석하여 사질토와 점성토에 대하여 각각 $f/f_{max}$-w/D 곡선의 평균선을 구하였으며 각 곡선을 쌍곡선함수로 나타내었다. 그리고 이 곡선의 적용성을 알아보기 위하여 이 곡선을 이용한 결과와 말뚝해석 프로그램인 TZPILE 2.0을 이용한 결과를 국내 3현장의 재하시험결과와 비교분석하였다. 그 결과 일반적으로 본 연구의 결과를 적용하여 얻은 하중-침하량 관계가 기존의 TZPILE 2.0으로 얻은 관계보다 비교적 실측값에 가까운 경향을 보였으며 보수적으로 나타났다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.76-83
• /
• 2000

Boundary lubrication condition arises in most lubricated systems, especially during motion reversals and start up phase of operation. In this work electric contact resistance variations with respect to sliding conditions under lubrication is investigated The motivation was to improve the understanding of the contact condition in the boundary lubrication regime. It is shown that electrical contact resistance is sensitive to sliding speed and surface condition of the specimens. Also, phenomena such as run-in during the initial phase of sliding and lubricant pile up near the sliding pin could be observed. The results of this work will aid in better understanding of the metal to metal contact condition in lubricated systems.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.204-213
• /
• 2003

A survey for finding corrosion examples was performed on the underground steel piles buried for 19 years in the area of iron and steel making factory near Young-il bay. A failure probability model, which can be used to check the reliability of the corrosive mechanical element, based on Von-Mises failure criterion and the standard normal probability function is proposed. The effects of varying boundary conditions such as temperature change, soil-friction, internal pressure, earthquake, loading of soil, traffic loads and corrosion on failure probability of the buried steel piles are systematically investigated. To allow for the uncertainties of the design variables, a reliability analysis technique has been adopted; this also allows calculation of the relative contribution of the random variables and the sensitivity of the failure probability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.537-544
• /
• 2009

Several domestic and foreign design methods for rock socketed drilled shafts were introduced in this study. In order to verify these design methods, the results of field pile load tests were compared with predicted capacities using them. Based on this study, AASHTO(1996) and FHWA(1999) design methods tend to underestimate, and CFEM(2006) and NAVFAC(1982) tend to overestimate. The difference between the predicted and measured values was caused by reflecting different rock socket geometry and also different rock properties in each design method.

• Tribology and Lubricants
• /
• 제16권5호
• /
• pp.381-388
• /
• 2000

Boundary lubrication condition arises in most lubricated systems, especially during motion reversals and start up phase of operation. In this work electric contact resistance variations with respect to sliding conditions under lubrication is investigated. The motivation was to improve the understanding of the contact condition in the boundary lubrication regime. It is shown that electrical contact resistance is sensitive to sliding speed and surface condition of the specimens. Also, phenomena such as run-in during the initial phase of sliding and lubricant pile up near the sliding pin could be observed. The results of this work will aid in better understanding of the metal to metal contact condition in lubricated systems.

• Geomechanics and Engineering
• /
• 제38권1호
• /
• pp.79-91
• /
• 2024

The settlement, bearing capacity, axial force, and skin friction responses of pervious and impervious concrete piles in silty and sandy underlying layer foundations and of pervious concrete piles in model tests were determined. The results showed that pervious concrete piles can exhibit high strengths, provide drainage paths and thus reduce foundation consolidation time. Increasing the soil layer thickness and pile length could eliminate the bearing capacity difference of pervious piles in a foundation with a silty underlying layer. The pervious concrete piles in the sandy underlying layer were more efficacious than those in the silty underlying layer because the sandy underlying layer can provide more bearing capacity than the silty underlying layer. The results indicated that the performances of the pervious concrete piles in the sand and silt foundations differed. The pervious concrete piles functioned as floating piles in the underlying layer with a lower bearing capacity and as end-bearing piles in the underlying layer with a higher bearing capacity.

• 한국지반신소재학회논문집
• /
• 제15권3호
• /
• pp.27-37
• /
• 2016

국내 GCP공법은 많은 선행연구가 진행되었으나, 설계자의 경험에 의해 의존하여 설계되고 있는 실정이므로 파괴사례가 종종 보고되고 있다. 이에 따라 명확한 파괴 원인규명 및 파괴예방대책 수립이 어려운 실정이다. 따라서 본 연구에서는 GCP공법의 합리적인 설계법의 제안을 위한 기초단계로써, GCP에 사용되는 최적배합비를 대형직접전단시험을 통해 결정하고, 내부마찰각의 변화에 따른 응력분담비의 변화 및 지반의 수직/수평 침하거동을 수치해석을 통하여 분석하였다. 직접전단 실험결과 쇄석과 모래의 최적배합비는 70:30으로 평가되었다. 수치해석결과 내부마찰각이 증가할수록 응력분담비가 증가하나 일정한 값으로 수렴하고 침하량이 감소하며, 최적배합비로 시공할 경우 측방유동 및 히빙현상의 감소를 유도할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.477-493
• /
• 2014

This study examines the behaviour of single micropiles subjected to axial tension or compression load in collapsible loess under in-situ moisture content and saturated condition. Five tension loading tests and five compression loading tests on single micropiles were carried out at a typical loess site of the Loess Plateau in Northwest China. A series of laboratory tests, including grain size distribution, specific gravity, moisture content, Atterberg limits, density, granular components, shear strength, and collapse index, were carried out during the micropile loading tests to determine the values of soil parameters. The loess at the test site poses a severe collapse risk upon wetting. The tension or compression load-displacement curves of the micropiles in loess, under in-situ moisture content or saturated condition, can generally be simplified into three distinct regions: an initial linear, a curvilinear transition, and a final linear region, and the bearing capacity or failure load can be interpreted by the L1-L2 method as done in other studies. Micropiles in loess should be considered as frictional pile foundations though the tip resistances are about 10%-15% of the applied loads. Both the tension and compression capacities increase linearly with the ratio of the pile length to the shaft diameter, L/d. For micropiles in loess under in-situ moisture content, the interpreted failure loads or capacities under tension are 66%-87% of those under compression. However, the prewetting of the loess can lead to the reductions of 50% in the tensile bearing capacity and 70% in the compressive bearing capacity.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1228-1236
• /
• 2006

In soft ground, There are many case that Bridge Abutment is constructed after soil improvement in order to reduce the Negative Friction and prevent from Lateral Soil movements of Bridge Abutment. That section of Horizontal Subgrade Reaction $Modulus(K_h)$ derivation has much important mean due to Horizontal Stability of Abutment. It is come from behavior of Pile and Soil within depth of $1/\beta$. After Soil Improvement, however, If Bridge Abutment was construction, It's not impossible to carry out Field Investigation After Ground of Improved at design stage. Therefore, It's not able to derivate Horizontal Subgrade Reaction $Modulus(K_h)$. Therefore, in this case of study compare with Field Construction Test Data in order to derivation of Horizontal Subgrade Reaction $Modulus(K_h)$ and Reliability in terms of ground of Bridge Abutment by Sand Compaction Pile(SCP) during design of The 2nd Bridge Connection Road of Incheon International Airport. In this paper determine, Soil Property(The rate of strength increase, $c_u$ so on) and Horizontal Subgrade Reaction $Modulus(K_h)$ after soil improvement at design stage.