• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.418-424
• /
• 2007

This paper proposes a scheme to track channel response in OFDM systems with null sub-carriers. The proposed channel tracking scheme estimates the channel response first in the frequency domain by using the decision directed data. The time domain channel estimation is then performed to remove additive white Gaussian noise (AWGN) components further. Due to the channel estimation in the frequency domain, no inverse matrix calculation is required in the time domain channel estimation. Computational reduction in the proposed method is about 93%, compared with the conventional time domain channel estimation method. Mean square error (MSE) and bit error rate (BER) performances are evaluated by using computer simulation. The proposed method shows the same performance as that of the conventional time domain channel estimation even though the significant computational reduction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.955-960
• /
• 2009

In this paper, we propose a novel approach to residual echo suppression (RES) algorithm based on tracking echo-presence uncertainty (TEPU) to improve the performance of acoustic echo suppression (AES) in the frequency domain. In the proposed method, the ratio of the microphone input and the echo-suppressed output signal power is employed as the threshold value for the decision rule to estimate the echo-presence uncertainty applied to the RES filter. The proposed RES scheme estimates the echo presence uncertainty in each frequency bin and effectively reduces residual echo signal in a simple fashion. The performance of the proposed algorithm is evaluated by the objective test and yields better results compared with the conventional schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.280-294
• /
• 2023

Unmanned aerial vehicles (UAVs) and millimeter-wave frequencies play key roles in supporting 5G wireless communication systems. They expand the field of wireless communication by increasing the data capacities of communication systems and supporting high data rates. However, short wavelengths, owing to the high millimeter-wave frequencies can cause problems, such as signal attenuation and path loss. To address these limitations, research on high directional beamforming technologies continue to garner interest. Furthermore, owing to the mobility of the UAVs, it is essential to track the beam angle accurately to obtain full beamforming gain. This study presents a beam tracking method based on the unscented Kalman filter using hybrid beamforming. The simulation results reveal that the proposed beam tracking scheme improves the overall performance in terms of the mean-squared error and spectral efficiency. In addition, by expanding analog beamforming to hybrid beamforming, the proposed algorithm can be used even in multi-user and multi-stream environments to increase data capacity, thereby increasing utilization in new-radio multiple-input multiple-output orthogonal frequency-division multiplexing systems.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.683-689
• /
• 2016

Most outdoor solid insulators may suffer from surface degradations due to non-stationary currents that flow on the insulator surface. These currents may be classified as leakage, discharge and tracking currents due to their disturbing potencies respectively. The magnitude of these currents depends on the degree of the contamination of surface. The leakage signals are followed by discharge signals and tracking signals which are capable of forming carbonized tracking paths on the surface between high voltage and earth contacts (surface tracking). Surface tracking is one of the most breakdown mechanisms observed on the solid insulators, especially polymers which may cause severely reduced lifetime. In this study the degradations observed on polyester resin based insulators are investigated according to the IEC 587 Inclined Plane Test Standard. The signals are monitored and recorded during tests until surface tracking initiated. In order to prevent total breakdown of an insulator, early detection of tracking signals is vital. Continuous Wavelet Transform (CWT) is proposed for classification of signals and their energy levels observed on the surface. The application of CWT for processing and classification of the surface signals which are prone to display high frequency oscillations can facilitate real time monitoring of the system for diagnosis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.93-99
• /
• 2016

In this paper, higher order coupler using small size waveguide which applicable for mobile Ku-band multimode monopulse satellite tracking antenna system, has been designed, implemented and tested. Proposed higher order mode coupler adopts a coaxial structure for low profile characteristic considering installation property to mobile satellite terminal system. In addition, by using proposed coupler, extracted tracking error signal pattern has measured and confirmed that required tracking accuracy is satisfied in desired frequency band. In the future, proposed coupler could utilize for multimode monopulse satellite tracking system for high tracking accuracy.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.18-26
• /
• 2011

This paper presents a method, Exposure Controlled Temporal Filtering (ECF), applied to visual motion tracking, that can cancel the temporal aliasing of periodic vibrations of cameras and fluctuations in illumination through the control of exposure time. We first present a theoretical analysis of the exposure induced image time integration process and how it samples sensor impingent light that is periodically fluctuating. Based on this analysis we develop a simple method to cancel high frequency vibrations that are temporally aliased onto sampled image sequences and thus to subsequent motion tracking measurements. Simulations and experiments using the 'Center of Gravity' and Normalized Cross-Correlation motion tracking methods were performed on a microscopic motion tracking system to validate the analytical predictions.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2314-2316
• /
• 1999

This study describes the results of aging characteristics of polymer insulators through the tracking wheel test. In order to evaluate the reliability of polymer insulators, 4 polymer insulators which used in the field were selected. Electrical tests such as power frequency voltage test, steep-front impulse voltage test were performed after tracking wheel test. Chemical structure and contact angle were measured for investigating an aging characteristics. Although some changes have occurred on the surface of insulator, there are no critical changes between new and tracking wheel tested insulator.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.192-199
• /
• 2000

This paper describes a Phase-Shift Pulse Modulation(PSPM) and Frequency Trad이ng Pulse Modulation(FTPM) s series resonant high-frequency inverter using IGBT for the power control of high-frequency induction heating u using Neuro-Fuzzy, which is practically applied for 20kHz~500kHz induction-heating and melting power supply in i indust껴aJ fields. The adaptive frequency tracking based on the PSPM(phase-shifting pulse modulation) r regulation scherne is presented in or$\tau$ler to l11lmmlZe svvitching losses. The trially-produced breadboards using N Neuro Fuzzy controller are successfully demonstrated cUld cliscussed.

• Smart Structures and Systems
• /
• v.13 no.2
• /
• pp.319-341
• /
• 2014

A family of smart tuned mass dampers (STMDs) with variable frequency and damping properties is analyzed under harmonic excitations and ground motions. Two types of STMDs are studied: one is realized by a semi-active independently variable stiffness (SAIVS) device and the other is realized by a pendulum with an adjustable length. Based on the feedback signal, the angle of the SAIVS device or the length of the pendulum is adjusted by using a servomotor such that the frequency of the STMD matches the dominant excitation frequency in real-time. Closed-form solutions are derived for the two types of STMDs under harmonic excitations and ground motions. Results indicate that a small damping ratio (zero damping is the best theoretically) and an appropriate mass ratio can produce significant reduction when compared to the case with no tuned mass damper. Experiments are conducted to verify the theoretical result of the smart pendulum TMD (SPTMD). Frequency tuning of the SPTMD is implemented through tracking and analyzing the signal of the excitation using a short time Fourier transformation (STFT) based control algorithm. It is found that the theoretical model can predict the structural responses well. Both the SAIVS STMD and the SPTMD can significantly attenuate the structural responses and outperform the conventional passive TMDs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.159-166
• /
• 2008

In this paper, we proposed an algorithm to solve the problem that can't maintain hop synchronization using only early-late gate tracking loop due to the drift of geo-stationary satellite in frequency hopping satellite communication system. When the signal is transferred to downlink through DRT(Dehop-Rebop Transponder), the problem with synchronization loss is occurred periodically when using only early-late gate tracking loop, because of energy loss in each side portion of hop due to orbital variation of the satellite. To solve this problem, we have developed Anti-Shrink synchronization tracking algorithm which uses the prediction value of transmission timing and the structure of inner-outer gate instead of early-late gate with the ranging information. Through simulations, we showed that the performance of the Anti-Shrink algorithm is better than that of simple inner-outer energy ratio algorithm and similar to that of conventional early-late tracking loop algorithm with ranging information. No synchronization failure in the proposed algorithm was occurred because of less energy loss and robustness without the ranging information.