• 화약ㆍ발파
• /
• 제29권2호
• /
• pp.51-58
• /
• 2011

발파진동이 구조물에 미치는 영향에 있어서 진동의 시간적 변화특성을 나타내는 주파수특성의 중요성이 인식되면서 최근 발파진동 영향평가에 있어서 최대진폭 외에도 진동에 수반되는 주파수 성분을 영향변수로 표현하는 방법이 점차 보편화 되어가고 있다. 이에 본 연구에서는 편마암 지역의 암석샘플을 채취하여 실내암석 실험을 실시하였고, 기폭위치에 따라 발파진동의 주파수 특성을 파악하기 위해서 단일공 시험발파를 실시하여 고속 푸리에 변환(FFT)을 통해 주주파수를 결정하고 기폭위치에 따라 어떤 변화가 있는지 분석하였다. 그 결과 기폭위치에 따른 주파수 대역에서는 정기폭은 낮은 주파수 대역, 역기폭은 높은 주파수 대역, 중간기폭은 대체로 골고루 분포됨을 알 수 있었다. 기폭위치에 따른 주파수 경향을 분석해 본 결과에서는 정기폭은 거리가 증가함에 따라서 주파수 값이 감소하였으며, 역기폭은 거리가 증가함에 따라 주파수 값이 증가함을 보였다.

• 한국음향학회지
• /
• 제31권3호
• /
• pp.197-204
• /
• 2012

본 연구에서는 마이크로폰에 입사되는 음성 신호를 거리의 변동에 의해 크기와 주파수 응답특성 변화를 최소화시키는 방법에 대한 연구를 하였다. 우선 마이크로폰과 음성음원 사이의 거리를 변화시키며 거리변화에 따른 응답특성을 측정하였다. 본 연구에 사용된 마이크로폰은 일반적으로 사용되는 마이크로폰 중에 무지향성 마이크로폰과 초단일지향성 마이크로폰, 단일지향성 마이크로폰 등, 3가지 종류의 마이크로폰을 선정하였다. 측정한 이들 마이크의 주파수 응답특성 변화 결과를 기준치와 비교하여 보정치를 구하고 이를 주파수 대역별로 변화된 음성신호를 원음과 근사하게 보상하도록 하였다. 저주파대역은 근접효과에 의한 증폭현상, 그리고 거리에 의한 감쇠효과를 보정하도록 하였다. 중음대역에서는 저음대역보다 거리의 변화에 의한 주파수특성 편차가 비교적 적었지만 음성정보신호에 중요한 영향을 주는 부분이기 때문에 기준신호와 비교하여 복원하도록 하였다. 고주파대역의 음성정보의 변화는 극히 미소하여 고주파대역 조정은 큰 문제가 없이 원음에 가깝게 복원되었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.8-16
• /
• 2017

Most of small air vehicles with moving wing fly at low Reynolds number condition and the reduced frequency of the moving wing ranges from 0.0 to 1.0. The physical phenomena over the wing dramatically vary with the reduced frequency. This study examines experimentally the effect of the reduced frequency at low Reynolds number. The NACA0012 airfoil performs sinusoidal pitching motion with respect to the quarter chord with the four reduced frequencies of 0.1, 0.2, 0.4 and 0.76 at the Reynolds number $2.3{\times}10^4$. Smoke-wire flow visualization, unsteady surface pressure measurement, and unsteady force calculation are conducted. At the reduced frequency of 0.1 and 0.2, various boundary layer events such as reverse flow, discrete vortices, separation and reattachment change the amplitude and the rotation direction of the unsteady force hysteresis. However, the boundary layer events abruptly disappear at the reduced frequency of 0.4 and 0.76. Especially at the reduced frequency of 0.76, the local variation of the unsteady force with respect to the angle of attack completely vanishes. These results lead us to the conclusion that the unsteady aerodynamic characteristics of the reduced frequency of 0.2 and 0.4 are clearly distinguishable and the unsteady aerodynamic characteristics below the reduced frequency of 0.2 are governed by the boundary layer events.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.423-431
• /
• 2002

An experimental study is conducted to investigate the effect of two-frequency forcing on turbulent flow behind a backward-facing step at the Reynolds number of 27000 based on the step height. The forcing is provided from a thin slit located at the edge of the backward-facing step to increase mixing behind the backward-facing step and consequently to reduce the reattachment length. With single frequency forcing, the minimum reattachment length is obtained at the non-dimensional forcing frequency (F) of St$\_$h/ = 0.29. With two-frequency forcing, a subharmonic frequency (F/2) or biharmonic frequency (2F) is combined with the fundamental frequency (F), i.e. (F, F/2) or (F, 2F) forcing is applied. In the case of (F, F/2) forcing, the reattachment length is not much sensitive to the phase difference between F and F/2. However, the reattachment length significantly depends on the phase difference between F and 2F in the case of (F, 2F) forcing. At a certain range of the phase difference, the reattachment length becomes smaller than that of the single frequency forcing.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1213-1217
• /
• 2008

Poling is an important process in fabricating PZT ceramic devices such as filters and resonators and activates piezoelectricity to sintered PZT ceramics. Tolerance of the operating frequency of these devices is tightly required in applications. And a factor to attribute the tolerance is the temperature dependence of the resonance frequency of PZT ceramics. In this paper the relationship of poling strength and temperature dependence of resonance frequency of PZT specimens was studied. The $Pb(Zr_{0.53}Ti_{0.47})O_3$ ceramics were fabricated and the poling strengths were chosen to be 0.5, 1.5, 2.5 and 3.5 [kV/mm]. The dielectric constant of the specimen poled in poling strength 0.5 [kV/mm] was less than that of unpoled specimen and the specimen poled in higher electric field had the higher dielectric constant. (002) peak in X-ray diffraction patterns of the specimens increased as poling strength increased. And the change of resonance frequency of the specimens according to the variation of temperature was measured. Resonance frequency of all specimens increased as the temperature increased. The specimen poled in higher electric field had the smaller positive temperature coefficient of resonance frequency. The effect that temperature coefficient of resonance frequency becomes smaller is obtained when Zr mole in PZT composition equation increase. Controlling the poling strength is believed to be a method to adjust the temperature stability of resonance frequency of the PZT ceramic devices.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.580-594
• /
• 2015

Liquid sloshing in two-dimensional (2-D) and three-dimensional (3-D) rectangular tanks is simulated by using a level set method based on the finite volume method. In order to examine the effect of natural frequency modes on liquid sloshing, we considered a wide range of frequency ratios ($0.5{\leq}fr{\leq}3.2$). The frequency ratio is defined by the ratio of the excitation frequency to the natural frequency of the fluid, and covers natural frequency modes from 1 to 5. When fr = 1, which corresponds to the first mode of the natural frequency, strong liquid sloshing reveals roof impact, and significant forces are generated by the liquid in the tank. The liquid flows are mainly unidirectional. Thus, the strong bulk motion of the fluid contributes to a higher elevation of the free surface. However, at fr = 2, the sloshing is considerably suppressed, resulting in a calm wave with relatively lower elevation of the free surface, since the waves undergo destructive interference. At fr = 2, the lower peak of the free surface elevation occurs. At higher modes of $fr_3$, $fr_4$, and $fr_5$, the free surface reveals irregular deformation with nonlinear waves in every case. However, the deformation of the free surface becomes weaker at higher natural frequency modes. Finally, 3-D simulations confirm our 2-D results.

• 중환자간호학회지
• /
• 제16권2호
• /
• pp.67-80
• /
• 2023

Purpose : The 2020 Dietary Guidelines Advisory Committee specifically noted that meal frequency is associated with risks for cardiovascular disease, type 2 diabetes, and all-cause mortality, although the current evidence on meal frequency is conflicting. As meal frequency itself is affected by various factors, the aim of the study was not only to examine its relationships with cardiometabolic risk but also to identify the mediating effects of dietary quality. Methods : This study used a descriptive correlational design. In all 8,141 healthy adults participated in the study. Measurements included meal frequency, cardiometabolic risk, and diet quality. Data were analyzed using descriptive statistics, Pearson's correlation coefficient analysis, and process macro bootstrapping model 4. Results : The meal frequency was 3.52±0.61 times per day, the risk of cardiovascular metabolic diseases was 0.01±0.61 points, and the diet quality was 62.08±13.87 points. In mediation analysis, the effect of meal frequency on cardiometabolic risk score was completely mediated by diet quality. Conclusion : Improved diet quality in healthy adults should be considered when designing meal frequency interventions aimed at reducing their cardiometabolic risk, as the effect of meal frequency support on cardiometabolic risk was found to be mediated by diet quality.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권2호
• /
• pp.227-232
• /
• 2016

To test the effectiveness of using an energy storage system for frequency regulation, the Energy New Business Laboratory at KEPCO Research Institute installed a 4 MW energy storage system (ESS) demonstration facility at the Jocheon Substation on Jeju Island. And after the successful completion of demonstration operations, a total of 52 MW ESS for frequency regulation was installed in Seo-Anseong (28 MW, governor-free control) and in Shin-Yongin (24 MW, automatic generation control). The control system used in these two sites was based on the control system developed for the 4 MW ESS demonstration facility. KEPCO recently finished the construction of 184 MW ESS for frequency regulation in 8 locations, (e.g. Shin-Gimjae substation, Shin-Gaeryong substation, etc.) and they are currently being tested for automatic operation. KEPCO plans to construct additional ESS facilities (up to a total of about 500 MW for frequency regulation by 2017), thus, various operational tests would first have to be conducted. The high-speed characteristic of ESS can negatively impact the power system in case the 500 MW ESS is not properly operated. At this stage we need to verify how effectively the 500 MW ESS can regulate frequency. In this paper, the effect of using ESS for frequency regulation on the power system of Korea was studied. Simulations were conducted to determine the effect of using a 524 MW ESS for frequency regulation. Models of the power grid and the ESS were developed to verify the performance of the operation system and its control system. When a high capacity power plant is tripped, a 24 MW ESS supplies power automatically and 4 units of 125MW ESS supply power manually. This study only focuses on transient state analysis. It was verified that 500 MW ESS can regulate system frequency faster and more effectively than conventional power plants. Also, it was verified that time-delayed high speed operations of multiple ESS facilities do not negatively impact power system operations. It is recommended that further testing be conducted for a fleet of multiple ESSs with different capacities distributed over multiple substations (e.g. 16, 24, 28, and 48 MW ESS distributed across 20 substations) because each ESS measures frequency individually. The operation of one ESS facility will differ from the other ESSs within the fleet, and may negatively impact the performance of the others. The following are also recommended: (a) studies wherein all ESSs should be operated in automatic mode; (b) studies on the improvement of individual ESS control; and (c) studies on the reapportionment of all ESS energies within the fleet.

• KSBB Journal
• /
• 제26권3호
• /
• pp.260-265
• /
• 2011

This study aimed to examine the treatment effect of Muraenesox cinereus extract product combined with high frequency on men's damaged skin. The subjects were treated by a product containing M. cinereus extract combined with high frequency therapy for six weeks and tested in skin condition. First, for moisture level change, there was no significant difference between the control group treated only by high frequency therapy and the experimental group treated by a M. cinereus extract product combined with high frequency therapy. But the subjects who increased consistently in moisture level in the cheek and chin were more common in the experimental group. Second, for an oil level, prominently high increase was found in both the control group and the experimental group. Finally, for a rough level, while there was little difference in the control group between immediately after peeling and after six weeks, high improvement effect on a curve was found in the experimental group. Based on this result, cosmetics using M. cinereus extract may have a positive effect on men's skin which is exposed to several stress factors. Accordingly, this result will contribute to developing men's functional cosmetics.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5602-5609
• /
• 2014

본 연구는 카제인포스포펩타이드-아모르포우스칼슘포스포페이트(CPP-ACP)에 불소이온을 결합시킨 불화 카제인포스포펩타이드-아모르포우스칼슘포스페이트(CPP-ACFP)제제의 법랑질 재광화 정도를 알아보기 위한 실험으로 법랑질 표면에 산부식 시간을 달리한 후 CPP-ACFP제제를 같은 횟수로 도포했을 때의 재광화 정도와 CPP-ACFP제제의 도포 횟수가 법랑질의 재광화에 미치는 영향을 알아보고자 건전한 치아 64개를 대상으로 미세경도측정, 주사전자현미경 관찰 실험을 하였다. 그 결과 산부식 시간이 길어질수록, CPP-ACFP제제의 도포 횟수를 증가시킬수록 법랑질의 재광화가 더 잘 일어나는 것을 관찰할 수 있었다. 그러므로 CPP-ACP에 불소이온을 결합시켜 치아에 무기질 공급과 불소도포를 한 번에 할 수 있는 CPP-ACFP제제는 법랑질 재광화 물질로 권장할 만하다고 하겠다.