• 한국전산구조공학회논문집
• /
• 제31권6호
• /
• pp.331-337
• /
• 2018

본 논문은 MLS(moving least squares) 차분법의 1차 미분 근사함수를 바탕으로 시간에 따른 수치해석이 가능한 해석기법을 제시한다. 오직 1차 미분 근사함수로만 지배방정식을 이산화했으며, 근사함수를 조립하는 형태로 전체 시스템 방정식을 구성하여 차분법으로 이산화된 운동방정식이 유한요소법(finite element method)과 유사한 모습을 갖게 되었다. 운동방정식을 시간적분하기 위해서 중앙차분법(central difference method)을 사용하였다. 유한요소 알고리즘을 통해서 MLS 차분법과 유한요소법의 고유진동 해석을 수행하였으며, 두 해석결과를 비교하였다. 또한, 동적해석 결과를 기존의 2차 미분 근사함수를 활용한 해석결과와 함께 도시함으로써 제안된 수치기법의 정확성을 검증하였다. 1차 미분 근사함수를 조립하는 과정에서 해석결과의 떨림현상이 억제되었으며 상대적으로 균일한 응력분포를 구할 수 있었다.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1210-1216
• /
• 2003

Topology optimization is applied to determine the layout of a structural component with a specified frequency by minimizing the difference between the specified structural frequency and a given frequency. The homogenization design method is employed and the topology design problem is solved by the optimality criteria method. The value of a weighting factor in the optimality criteria plays an important role in this topology design problem. The modified optimality criteria method approximated by using the binomial expansion is suggested to determine the suitable value of the weighting factor, which makes convergence stable. If a given frequency is set as an excited frequency, it is possible to avoid resonance by moving away the specified structural frequency from the given frequency. The results of several test problems are compared with previous works and show the validity of the proposed algorithm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.621-624
• /
• 2005

Among many auditory feelings for the vehicle interior noise, booming is considered as the most important nuisance to the passenger and developer. Because the main source of booming noise is a power train system including engine, in general, it consists of tonal components related to fundamental engine rotation and its harmonics including the firing frequency. Therefore, it is demanded to extract the effective tonal components only by using pitch extraction algorithm based on the place theory enable to find aurally relevant tonal components. However, there is a difference between booming sensation and pitch perception according to frequency change of tonal component. In this study, subjective listening test using a tracking method was performed to find the difference limen for just noticeable change of booming sensation in frequency. 20 Koreans and 10 Japanese were participated in this test and the results obtained from Koreans and Japanese were compared with each other. Finally, 5Hz was determined as the difference limen for just noticeable change of booming sensation in frequency, and by applying this value to booming analysis using pitch concept, it was confirmed that the degree of prediction of booming sensation was improved.

• Structural Engineering and Mechanics
• /
• 제75권3호
• /
• pp.311-325
• /
• 2020

In applying the spectral stochastic finite element methods to the frequency response analysis, the conventional methods are known to give unstable and inaccurate results near the natural frequencies. To address this issue, a new sensitivity based stabilized formulation for stochastic frequency response analysis is proposed in this paper. The main difference over the conventional spectral methods is that the polynomials of random variables are applied to both numerator and denominator in approximating the harmonic response solution. In order to reflect the resonance behavior of the structure, the denominator polynomials is constructed by utilizing the natural frequency sensitivity and the random mode superposition. The numerator is approximated by applying a polynomial chaos expansion, and its coefficients are obtained through the Galerkin or the spectral projection method. Through various numerical studies, it is seen that the proposed method improves accuracy, especially in the vicinities of structural natural frequencies compared to conventional spectral methods.

• 한국수자원학회논문집
• /
• 제55권9호
• /
• pp.701-705
• /
• 2022

이상기후로 가뭄이 빈번해짐에 따라 수자원 시설의 가뭄대응력 산정에 대한 필요성이 커지고 있다. 이를 위해서는 신뢰할 수 있는 갈수빈도 유입량 추정 연구가 선행되어야 한다. 본 연구는 기존 K-water의 가뭄 빈도유입량 추정방법인 누가차분법의 세 가지 한계, 즉 음의 값과 역전현상, 그리고 평년 이상으로 과대 산정되는 문제의 발생조건에 대해 각각 2변수 log-normal 분포와 Gumbel 분포를 적용하여 이론적 고찰을 실시하였다. 그 결과, 음의 값은 누가 과정에서 scale parameter보다 location parameter의 변화가 커지는 경우 발생함을 확인하였고, 역전현상 및 평년보다 큰 가뭄유입량은 누가 과정에서 표준편차가 감소하는 경우 발생하는 것으로 분석되었다.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.269-294
• /
• 2013

This paper is concerned with the determination of exact buckling loads and vibration frequencies of variable thickness isotropic plates using well known finite difference technique. The plates are subjected to uni, biaxial compression and shear loadings and various combinations of boundary conditions are considered. The buckling load is found out as the in plane load that makes the determinant of the stiffness matrix equal to zero and the natural frequencies are found out by carrying out eigenvalue analysis of stiffness and mass matrices. New and exact results are given for many cases and the results are in close agreement with the published results. In this paper, like finite element method, finite difference method is applied in a very simple manner and the application of boundary conditions is also automatic.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.14-15
• /
• 2000

We study the microwave characteristics of traveling-wave photodetector using the finite-difference time-domain method. We present two parameters for design, the width of PIN region and the thickness of i-layer, and analyze TWPD's property in frequency domain.

• 수산해양기술연구
• /
• 제37권4호
• /
• pp.313-320
• /
• 2001

In the presence of incident waves with different frequencies, there are second order sum and difference frequency wane exciting forces due to the nonlinearty of the incident waves. Although the magnitudes of these nonlinear forces are small, they act at sum and difference frequencies away from those of the incident waves. So, the second order sum and difference frequency wane loads occurring close to the natural frequencies of TLPs often give greater contributions to high and low frequency resonant responses. The components of the second order forces which depend on first order quantities have been evaluated using the three dimensional source distribution method. The numerical results of time domain motion analysis for the nonlinear wave exciting forces in regular waves are compared with the numerical ones of frequency domain analysis. The results of comparison confirmed the validity of the proposed approach.

• 한국통신학회논문지
• /
• 제21권10호
• /
• pp.2724-2730
• /
• 1996

In this paper, the dispersive characteristics of the Finite-Difference Frqequency-Domain method based on the Multi-Resolution Technique(MR-FDFD) are numerically analyzed. A dispersion analysis of the MR-FDFD ority of the MR-FDFD method to the spatial discretization is shown. We expect that the multi-resoluation technique will improve the disavantage of the finite difference techqnique which needs the large comutational memory for accurate electromagnetic analysis.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.397-403
• /
• 2020

In order to synchronize a remote system time to the reference time like Coordinated Universal Time (UTC), it is required to compare the time difference between the two clocks. The time comparison data may have some outliers and the time synchronization performance can be significantly degraded if the outliers are not removed. Therefore, it is required to employ an effective outlier detection algorithm for keeping high accurate system time. In this paper, an outlier detection method is presented for the time difference data of GNSS time transfer receivers. The time difference data between the system time and the GNSS usually have slopes because the remote system clock is under free running until synchronized to the reference clock time. For investigating the outlier detection performance of the proposed algorithm, simulations are performed by using the time difference data of a GNSS time transfer receiver corrected to a free running Cesium clock with intentionally inserted outliers. From the simulation, it is investigated that the proposed algorithm can effectively detect the inserted outliers while conventional methods such as modified Z-score and adjusted boxplot cannot. Furthermore, it is also observed that the synchronization performance can be degraded to more than 15% with 20 outliers compared to that of original data without outliers.