• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.736-740
• /
• 2007

A laboratory study on low frequency noise assessment has been carried out to evaluate the relevance of the weighting curve. Especially, the A-weighting curve which is used in most noise assessments has been evaluated using the acceptability limit in this study. The acceptability limit is one of the indicators in which the subjective responses were well-reflected. For the measurement of the acceptability limit, pure tone stimuli were used in the frequency range between 20 and 200 Hz. The measurement was proceeded in the anechoic chamber to minimize the background noise level. A total of 29 test subjects, who were aged between 19 to 33 years, participated in this study. They had been exposed to various stimuli for about 1 hour by supra-aural earphone. The measurement consisted of two listening sessions: hearing threshold and the acceptability limit session. The results showed that the tendency of the acceptability limit curve was approximately equal to C-weighting curve which had been found to be superior to A-weighting curve in assessment of low frequencies.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.889-898
• /
• 2016

Virtual Bass System (VBS) is widely used to extend the lower frequency limit of small loudspeakers, which generates harmonics of a fundamental frequency. The perceptual quality of the VBS is highly dependent on the harmonic weighting strategy. There have been several weighting methods, including exponential attenuation and timbre matching. However, it is essential to match phases between harmonics in the original signal and generate harmonics to precisely convey the weighting strategy. This paper shows the limitations of the previous harmonic weighting schemes and proposes a new harmonic weighting scheme. The proposed weighting scheme proposes phase matching between the original and generated harmonics and varies the slope of the attenuation weighting dynamically according to the missing fundamental frequency. Objective and subjective tests show that the proposed harmonic weighting scheme provides more natural and effective bass perception in a limited situation than the conventional schemes, which implies that the phase matching is essential for the high quality bass enhancement.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.58-62
• /
• 2015

Most blog sites provide predefined classes based on contents or topics, but few bloggers choose classes for their posts because of its cumbersome manual process. This paper proposes an automatic blog post classification method that variously combines term frequency, document frequency and class frequency from each classes to find appropriate weighting scheme. In experiment, combination of term frequency, category term frequency and inversed (excepted category's) document frequency shows 77.02% classification precisions.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.859-868
• /
• 2013

The active noise control (ANC) technique attenuates acoustic noise in a flexible and effective way. Traditional ANC design aims to minimize the residual noise energy, which is indiscriminative in the frequency domain. However, human hearing perception exhibits selective sensitivity for different frequency ranges. In this paper, we aim to improve the noise attenuation performance in perceptual perspective by incorporating noise weighting into ANC design. We also introduce psychoacoustic analysis to evaluate the sound quality of the residual noise by using a predictive pleasantness model, which combines four psychoacoustic parameters: loudness, sharpness, roughness, and tonality. Simulations on synthetic random noise and realistic noise show that our method improves the sound quality and that ITU-R 468 noise weighting even performs better than A-weighting.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.127-131
• /
• 2007

A laboratory study on low frequency noise assessment was carried out to determine the acceptability limits in the frequency range between 20 and 200 Hz. The acceptability limits were tested in the anechoic chamber to minimize the background noise. A total of 30 test subjects, who were aged between 19 to 33 years, participated in this study. They were exposed to various stimuli for about 1 hour by supra-aural earphone. The experiment consisted of two listening sessions; hearing threshold and the acceptability limits session. The results showed that the trend of the acceptability limits curve was approximately equal to C-weighting curve which had been found to be superior to A-weighting curve in low frequency noise assessment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.431-438
• /
• 2000

The cost function consists of the weighting functions concerning the structural responses to be controlled and the controller capability. Therefore, the control efficiency depends on the characteristics of the weighting functions. The objective of this paper is the comparative study of the time domain control strategies of LQR and LQG and the frequency domain strategy of H₂ by setting the equivalent weighting functions to the all control strategies. As a result of analysis, LQR strategy is found to be more efficient than other strategies in terms of the response reduction. but the control force is found to be a little highter. As LQG can compensate the limitation of LQR that all state variables should be identified, LQG is more acceptable algorithm than LQR. Furthermore LQG shows a good performance both in the response reduction and the control force. Finally H₂ algorithm is employed to illustrate the importance of weighting filters considering the frequency characteristics of the response and the controller. It Is shown that the H₂ algorithm is found to be the most effective one for the response control with a little control force having a low frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10C
• /
• pp.965-975
• /
• 2005

In this paper, we propose and evaluate joint carrier and sampling frequency offset estimation schemes based on the channel estimation sequences in PLCP (Physical Layer Convergence Procedure) preamble for the proper and effcient synchronization of the MB-OFDM WB (Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) systems which have recently drawn explosive attention for future W-PAN (Wireless Personal Area Network) applications. In the joint estimation schemes, we first estimate the sampling frequency offset, and then estimate the carrier frequency offset using the estimated sampling frequency offset. Moreover, to improve the reliability of the estimated offset values, each process uses a combination scheme based on weighting factors. Simulation results using IEEE 802.15 Task Group 3a UWB channel models reveal that the estimation scheme using the simple weighting factors based on easily-measurable received signal power of each sub-channel shows favorably comparable performance to the ideal scheme using the weighting factors based on the perfectly-estimated frequency response of the channel.

• Journal of the Korean Society for information Management
• /
• v.20 no.4 s.50
• /
• pp.233-248
• /
• 2003

The Inverse Document Frequency (IDF) weighting method is based on the hypothesis that in the document collection the lower the frequency of a term is, the more important the term is as a subject word. This well-known hypothesis is, however, somewhat questionable because some low frequency terms turn out to be insufficient subject words. This study suggests the pivoted IDF weighting method for better retrieval effectiveness, on the assumption that medium frequency terms are more important than low frequency terms. We thoroughly evaluated this method on three test collections and it showed performance improvements especially at high ranks.

• Nuclear Engineering and Technology
• /
• v.30 no.4
• /
• pp.353-363
• /
• 1998

The H$_{\infty}$ algorithms of the mixed weight sensitivity is used for the robust design of the reactor power control system. The mixed weight sensitivity method requires the selection of the proper weighting functions for the loop shaping in frequency domain. The complexity of the system equation and the non-convexity of the problem make it very difficult to determine the weighting functions. The genetic algorithm which is improved and hybridized with the simulated annealing is applied to determine the weighting functions. This approach permits an automatic calculation and the resultant system shows good robustness and performance.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.11
• /
• pp.93-101
• /
• 1992

HVS based transform coding techniques for still images take the lowest spatial frequency and luminance contrast sensitivity as the most crucial factors in determining the image quality perceived by human eye. Only the frequency weighting has been main issue. The proposed Weighted Discrete Cosine Transform (WDCT) has the lowest frequency of about 4 [cyc/deg] in 8$\times$8 subblock with the contrast-weighted DC coefficient. The error criteria have been rederived to adapt the contrast weighting for performance evaluation. The proposed scheme has produced higher quality images compared to the unweighted and other schemes.