• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.41-48
• /
• 1997

Nowadays, EMI emission characteristics, which causes harmful effect on power distribution system and other equipments, have been studied in field of Power electronics, vigoriously. So, in this paper, the conducted EMI emission is measured and compared for 3-phase diode rectifier and PWM converter according to switching frequency variation and current control method change using LISN(Line Impedance Stabilization Network) and spectrum analyzer.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.611-621
• /
• 2006

This paper is to discuss the numerical conformal mapping from the unit disk onto Jordan region, which can be solved by Theodorsen equation. Wegmann's method has been known as the most efficient one for the Theodorsen equation. However, we found divergence through numerical experiments by the iterative method of Wegmann. The divergence occurs especially when some degree of difficulty is high. We analyze the cause of divergence and propose an improved method by applying a low frequency pass filter to Wegmann's method. By this proposed method we can get a stable convergence for all the problems which was unstable with the Wegmann's method.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.714-719
• /
• 1999

Because the residual vibration of a gun barrel acts negatively on the firing of a large calibers gun, the fast stabilization of theresidual vibration is indispensible to the precise and successive firing. In this study, the residual vibrations of a gun barrel carrying a bore evacuator and a muzzle brake are investigated by the experimental method. The influence of the eigenfrequencies and the mode shapes of gun barrel on the fast stabilization of the residual vibration is studied for the various masses of bore evacuator and muzzle brake, the possition of bore evacutor. Also the relationships between the funcamental frequencies and the settling times of the gun barrel are investigated for the various parameters. The experiments to reduce the residual vibration using the viscoelastic damping treatment gives the best result among the various treatments for the reduction of residual vibration of the system.

• Proceedings of the Optical Society of Korea Conference
• /
• 1997.08a
• /
• pp.76-76
• /
• 1997

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.137-143
• /
• 2002

This paper concerns the spin-stabilization for the second stage of KSR-III(Korea Sounding Rocket-III). The error sources in the second stage are defined, and then the effect on attitude error of KSR-III is analyzed quantitatively and qualitatively. Based on the analysis, some conditions for optimal spinning frequency and optimal steady-spinning duration are suggested. Among several solutions, an optimal value can be determined in the point of minimum impact-point error. An approach to a sub-optimal solution is also suggested. Application to the KSR-III shows that a proper spinning frequency and a steady-spin duration to give the smallest impact-point error can be effectively determined.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.315-318
• /
• 2002

In this paper, we have studied about the determination methode of the operating frequency, and the design technique for the self-exited electronic ballast. Because we use the saturation characteristics of the ferrite core, the variation of the B/H curve characteristics for the selected core in the most important factor for the stabilization. Although it is impossible to fix the operation frequency, the self-exited electronic ballast is widely used because of its cost and the simplicity of its structure.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.133-139
• /
• 1995

In this paper, the frequency separation locking and interval stabilization of 4-channel DFB-LDs have been demonstrated using a fiber Fabry-Perot filter with an free spectral range of 100GHz. Frequency fluctuation and locking range of each channel were appeared to be within 15MHz and over 12GHz, respectively. Back-reflection curve from the fiber Fabry-Perot filter was used for the extraction of an error signal in order to increase the number of accomodable channels and extinction ratio.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.399-405
• /
• 2009

The focal plane image stabilization for a satellite camera is one of the an effective method which can increase the satellite camera's image quality by removing the motion disturbance of a focal plane. The objectives of this article are to introduce the concept of the focal plane image stabilization and determine the best driving conditions of the actuator for the response and thrust. Under various driving condition the experiments have been performed to investigate the response and thrust characteristics of the piezoelectric driven stick-slip actuator of the focal plane image stabilizing device. From experiments, the best driving frequency and duty ratio for the magnesium slider are 70 kHz and 27%, respectively.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.7 no.1
• /
• pp.35-42
• /
• 2009

Purpose : The purpose of this study was to investigate the effects of Swiss ball lumbar stabilization exercise on the strength and flexibility, balance for the subjects. 30 university students who aged an average $23.21{\pm}4.41$ years. Methods : The exercise program lasted for 4 weeks with a frequency of 3 times per week within 12 to RPE. The result was analyzed by case study were measured by sit-up for strength, and back muscle strength, and trunk flexion test and trunk extension lifting for flexibility, and also measured by balance test before and during, and after the Swiss ball exercise program. Statistical analysis was performed using SPSS/Win(15.0) version and t-test. Results : By the result of this study, we found that the number of performing sit-up strength was increased, and back muscle strength was increase, and trunk flexion test and trunk extension lifting was increased after the 4 weeks Swiss ball exercise program. Conclusion : These finding indicate that Swiss ball lumbar stabilization exercise using Swiss ball could be beneficial to the subjects. The effect of increasing strength and flexibility, balance was flexibility.

• Carbon letters
• /
• v.12 no.1
• /
• pp.16-20
• /
• 2011

Commercial PAN fibers were thermally stabilized at 220 or $240^{\circ}C$ for 30 min. Those fibers were further stabilized using radio-frequency (RF) capacitive plasma discharge during 5 or 15 min. From Fourier transform infrared spectroscopy results, it was observed that an additional plasma treatment led to further stabilization of PAN fibers. After stabilization, carbonization was performed to investigate the final tensile properties of the fabricated carbon fibers (CFs). The results revealed that a combination of thermal and plasma treatment is a possible stabilization process for manufacturing CFs. Morphology of CFs was investigated using scanning electron microscopy. The morphology shows that the plasma stabilization performed by the RF large gap plasma discharge may damage the surface of the CF, so it is necessary to select a proper process condition to minimize the damage.