• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.220-226
• /
• 2014

Input current ripple and harmonic components of the power device are main causes of electromagnetic interference (EMI). Although the discontinuous conduction mode (DCM) operation can reduce harmonic components of the power device by reducing reverse recovery current of diode and turn-off voltage spikes of the switch, input current ripple increases due to high peak to peak inductor current. Therefore, in this paper, frequency control algorithm is proposed to reduce the input current ripple of DCM operated interleaved boost converter. In the proposed algorithm, duty ratio is fixed either 0.33 or 0.67 to minimize the input current ripple and the switching frequency is controlled according to operating conditions. 600 W 3-phase interleaved boost converter prototype system is built to verify proposed algorithm.

• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1345-1352
• /
• 2010

We investigated the effect of brown-rice vinegar (BRV) ingestion after strenuous Wingate tests on energy substrates during a 2 hr recovery period. For this, seven healthy male adolescents were chosen as subjects. They performed 3 Wingate tests to induce fatigue, after which they ingested brown-rice vinegar (BRV) drink and/or water as a control (CON) after 15 min of the test. Blood was obtained pre-exercise and 30 min, 60 min, and 120 min post-exercise, and blood glucose, lactate, free fatty acids, ammonia, and cortisol were analyzed. After 120 min of recovery period, the 4th Wingate test was conducted to calculate the power recovery ratio of the 3rd and 4th trials. Breathing frequency, oxygen saturation, and heart rate did not show significant changes. Blood glucose level was lower in CON than BRV after 120 min of recovery, and blood lactate and ammonia levels were lower in BRV at 60 and 120 min. The higher free fatty acids were found at 60 and 120 min in BRV. In addition, Wingate power recovery ratio of peak power and peak power/body weight was significantly higher in BRV compared to CON. These results suggested that BRV ingestion after strenuous exercise facilitates fatigue recovery. Therefore, BRV might be effectively used as an ergogenic aid for events in which competitors compete two or more times a day.

• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.361-368
• /
• 2010

ACROSS device, which is composed of an implantable microphone, a signal processor, and a vibrating transducer, is a fullyimplantable middle ear hearing device(F-IMEHD) for the recovery of patients with hearing loss. And since a microphone is implanted under skin and tissue at the temporal bones, the amplitude of the sound wave is attenuated by absorption and scattering. And the vibrating transducer attached to the ossicular chain caused also the different displacement from characteristic of the stapes. For the gain control of auditory signals, most of implantable hearing devices with the digital audio signal processor still apply to fitting rules of conventional hearing aid without regard to the effect of the implanted microphone and the vibrating transducer. So it should be taken into account the effect of the implantable microphone and the vibrating transducer to use the conventional audio fitting rule. The aim of this study was to measure gain characteristics caused by the implanted microphone and the vibrating transducer attached to the ossicle chains for the gain compensation of ACROSS device. Differential floating mass transducers (DFMT) of ACROSS device were clipped on four cadaver temporal bones. And after placing the DFMT on them, displacements of the ossicle chain with the DFMT operated by 1 $mA_{peak}$ current was measured using laser Doppler vibrometer. And the sensitivity of microphones under the sampled pig skin and the skin of 3 rat back were measured by stimulus of pure tones in frequency from 0.1 to 8.9 kHz. And we confirmed that the microphone implanted under skin showed poorer frequency response in the acoustic high-frequency band than it in the low- to mid- frequency band, and the resonant frequency of the stapes vibration was changed by attaching the DFMT on the incus, the displacement of the DFMT driven with 1 $mA_{rms}$ was higher by the amount of about 20 dB than that of cadaver's stapes driven by the sound presssure of 94 dB SPL in resonance frequency range.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.3
• /
• pp.127-133
• /
• 2017

Objective: The purpose of this study was to explore the effect of repetitive wrist extension task training with electromyography (EMG)-triggered neuromuscular electrical stimulation (NMES) for wrist extensor muscle recovery in patients with stroke. Design: Randomized controlled trial. Methods: Fifteen subjects who had suffered a stroke were randomly assigned to an EMG-triggered NMES group (n=8) or control group (n=7); subjects in both groups received conventional therapy as usual. Subjects in the experimental group received application of EMG-triggered NMES to the wrist extensor muscles for 20 minutes, twice per day, five days per week, for a period of four weeks, and were given a task to make a touch alarm go off by activity involving extension of their wrist. In the control group, subjects performed wrist self-exercises for the same duration and frequency as those in the experimental group. Outcome measures included muscle reaction time and spectrum analysis. Assessments were performed during the pre- and post-treatment periods. Results: In the EMG-triggered NMES group, faster muscle reaction time was observed, and median frequency also showed improvement, from 68.2 to 75.3 Hz, after training (p<0.05). Muscle reaction time was significantly faster, and median frequency was significantly higher in the experimental group than in the experimental group after training. Conclusions: EMG-triggered NMES is beneficial for patients with hemiparetic stroke in recovery of upper extremity function.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.2 no.2
• /
• pp.1-12
• /
• 2004

The purpose of this study was to determine the effect of muscle fatigue by neuromuscular electrical stimulation(NMES). Using Biodex System 3PRO(Biodex Medical Systems Inc, USA), experiment was conducted as to the normal group(I) composed of fifteen adults and the patient group(II) composed of fifteen patients with spastic hemiplegia. As to each group, maximal tolerated intensity(MTI) and maximal tolerated isometric contraction(MTIC) in electric currents yielded by low rate(20 pps) and high rate(100 pps) neuromuscular electrical stimulation and the aspects of decrease and restoration of the isometric contraction were examined, and their strength decrement index(SDI) and strength recovery index(SRI) were also calculated. 1. As for MTI in NMES, the MTI of the group II was higher than that of the group I in both low rate and high rate NMES. In comparison within group, MTI of group II was significantly higher in high rate NMES rather than in low rate NMES(p<0.05). 2. In comparison of MTIC between groups, the group I showed higher in both low rate and high rate NMES. In comparison within group, MTIC of group II was significantly higher in high rate NMES rather than in low rate NMES(p<0.01). 3. As for SDI, both groups showed highest SDI in high rate NMES, but no significant differences could be observed. 4. As for SRI, both groups showed significantly low SRI in low rate NMES(p<0.01, p<0.05), and comparison between groups showed no significant differences could be observed. These result lead us to the conclusion that muscle fatigue was influenced by frequency, high rate NMES was lower at SDI and higher at SRI on compare to low rate NMES, therefor, a further studies concerning electrical stimulation should consider differences each frequency in response to treatment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.25-32
• /
• 2006

We propose a new M-ary state-transition FSK modulator technique for enhancing demodulator's symbol timing recovery which can be applied to acoustic MODEM. In the previous technique, the demodulator's symbol timing performance can degrade when the sequences of same symbols are transmitted. This proposed method, because the transmission symbol changes in every single symbol period, increases the synchronization performance dramatically and has a simple MODEM and frame structure. On the one hand, we improve modulation-derived synchronization(MDS) which is M-ary FSK's symbol timing recovery scheme, then analyze it. Finally the proposed method is analyzed from the viewpoint of frequency efficiency, which proves this method is appropriate for acoustic MODEM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1231-1239
• /
• 2010

The aim of this study was developing the non-invasive focused magnetic stimulation system(NI_FMSS) that can stimulates acupoints which are small parts and knotted muscular tissues. To evaluate pain treatment effect of the NI_FMSS, we caused muscle fatigue to 25 subjects in biceps of the arm. Then, we stimulated acupoints(trigger points) HT2 using low frequency stimulator(10 subjects) and NI_FMSS(10 subjects). The other 5 subjects had not been stimulated. We analyzed muscle fatigue recovery with median frequency, RMS and median power in frequency domain for 5 days. We checked the magnetic stimulation effect on acupoint by evaluation of muscle fatigue recovery. Therefore, we identified that the NI_FMSS was more efficient system to relieve muscle pain than electric-stimulation system.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.184-194
• /
• 2014

The CBS methodology has been utilized in order to make a rapid broadcast of emergency alert based on cellular systems. We present a synchronous cooperative communication method for the CBS. Especially, we suggest a synchronization scheme and a data recovery approach for high-rate cooperative communications. For the high-rate transfer of emergency alert, the cyclic prefix is added to the preamble for the synchronization. For the data recovery, the Alamouti technique is utilized on frequency domain, which is similar to SC-FDE. The simulation results confirm that our proposed scheme is very suitable for the CBS.

• ETRI Journal
• /
• v.21 no.3
• /
• pp.1-5
• /
• 1999

A clock and data recovery circuit with a phase-locked loop for 10 Gb/s optical transmission system was realized in a hybrid IC form. The quadri-correlation architecture is used for frequency-and phase-locked loop. A NRZ-to-PRZ converter and a 360 degree analogue phase shifter are included in the circuit. The jitter characteristics satisfy the recommendations of ITU-T. The capture range of 150 MHz and input voltage sensitivity of 100 mVp-p were showed. The temperature compensation characteristics were tested for the operating temperature from -10 to $60^{\circ}C$ and showed no increase of error. This circuit was adopted for the 10 Gb/s transmission system through a normal single-mode fiber with the length of 400 km and operated successfully.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.05a
• /
• pp.8-13
• /
• 2003

Frictional sound of 13 vapor permeable water repellent fabric by sound generator were recorded and analysed through FFT analysis. The frictional Sounds were quantified by calculating total sound pressure(LPT), the level range ΔL and the frequency difference Δf. Mechanical properties were measured by KES-FB. LPT values of specimens finished wet coating were higher than those of dry coating. Values for bending rigidity, shear stiffness, surface roughness and compressional recovery of polyurethane fabrics increased compared with the cire finished fabrics. Laminated fabrics had high values of frictional coefficient and low values of surface roughness. LPT showed significant correlation with compressional energy, weight and thickness. (ΔL) was highly correlated with compressional linearity, frictional coefficient, compressional recovery, and (Δf) with tensile linearity, compressional energy, thickness, and weight.