• 제목/요약/키워드: Frequency Mixing

Search Result 380, Processing Time 0.028 seconds

교류형 플라즈마 디스플레이 패널의 방전 조건변화에 따른 형광막의 발광특성 (Luminescence Properties of Phosphor Layer with Discharge Conditions in AC PDP)

  • 장상훈;태흥식;최경철
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제48권10호
    • /
    • pp.704-709
    • /
    • 1999
  • The optical properties such as luminance and color coordinates for phosphor layer were studied with applied voltage and gas pressure, Xe mixing ratio, frequency using He and Xe mixing gas in chamber like AC PDP. The luminance of red phosphor layer at constant pressure(300Toor) is increased with increasing voltage, but color purity is not varied. The luminance of red phosphor layer at constant voltage(280V)is decreased with increasing pressure, but the color purity is not varied. But the luminance is increased with increasing Xe mixing ratio at constant pressure(200Toor). And also the color purity is improved by this process. The luminance is increased up to 40kHz, but the color purity with frequency is not varied.

  • PDF

레이저 다이오드의 자기혼합 효과를 이용한 조직혈류 측정에 관한 연구 (A Study on the Measurement of Tissue Blood Flow by the Self-Mixing Effect of Laser Diode)

  • 고한우
    • 센서학회지
    • /
    • 제3권2호
    • /
    • pp.57-64
    • /
    • 1994
  • 레이저 다이오드의 자기혼합 효과를 이용한 조직혈류측정을 위한 기초연구를 하였다. 이동물체로 인한 레이저 도플러 신호를 자기혼합 효과에 의해 검출하였으며, 피검자의 인지로부터 비관혈적으로 조직의 혈류 변화를 측정할 수 있었다. 이동 물체의 이동속도가 변함에 따라 자기혼합 효과에 의한 도플러 편이 주파수는 선형적으로 변하였으며, in-vivo 실험의 인지에서 측정된 토플러 신호는 운동후의 주파수가 운동전의 주파수 보다 높았으며, 이는 운동생리학적인 결과와도 일치하였다.

  • PDF

주파수 상향 변환을 이용한 전치왜곡 전력 증폭기 설계 (A Design of Predistortion HPA using Frequency Up-Conversion Mixing Operation)

  • 정용채;김영;김철동
    • 한국전자파학회논문지
    • /
    • 제15권5호
    • /
    • pp.480-485
    • /
    • 2004
  • 본 논문에서는 혼합기의 주파수 상향 변환 동작을 이용한 새로운 전치왜곡 선형화 기법을 제안하였다. 이 선형화 기법은 주파수 상향 혼합 동작을 이용함에도 불구하고 추가적인 신호원을 필요로 하지 않는다. 대신 입력 신호로부터 2차 저주파 혼변조 왜곡 신호를 추출하여 주파수 상향 변환에 필요한 신호원으로 사용하였다. 제안한 전치왜곡 선형화 기법의 타당성을 보이기 위해 주파수가 1.8544 ㎓와 1.8556 ㎓인 2-톤 신호를 개인휴대 통신용 전력 증폭기에 인가하여 22 ㏈m/tone 출력시에 (CR) 비를 26 ㏈ 개선하였으며, 출력 신호레벨을 17 ㏈ 변화시키는 동작 영역에서 (C/I) 비를 20 ㏈ 이상 개선시켰다. 또한 IS-95A 1FA 신호를 인가하여 출력이 26.5 ㏈m일 때 885 KHz 및 1.25 MHz 이격 지점에서 인접 채널 전력비를 각각 10.8 ㏈, 6.4 ㏈ 개선시켰다.

SMART 유동혼합헤더집합체의 동수력 질량 특성 고찰 (Investigation of Hydrodynamic Mass Characteristic for Flow Mixing Header Assembly in SMART)

  • 이규만;안광현;이강헌;이재선
    • 한국압력기기공학회 논문집
    • /
    • 제16권1호
    • /
    • pp.30-36
    • /
    • 2020
  • In SMART, the flow mixing header assembly (FMHA) is used to mix the coolant flowing into the reactor core to maintain a uniform temperature. The FMHA is designed to have enough stiffness so the resonance with reactor internal structures does not occurs during the pipe break and the seismic accidents. Since the gap between the FMHA and the core support barrel assembly is very narrow compared with the diameter of FMHA, the hydrodynamic mass effect acting on the FMHA is not negligible. Therefore the hydrodynamic mass characteristics on the FMHA are investigated to consider the fluid and structure interaction effects. The result of modal analysis for the dry and underwater conditions, the natural frequency of primary vibration mode for the horizontal direction is reduced from 136.67 Hz to 43.76 Hz. Also the result of frequency response spectrum seismic analysis for the dry and underwater conditions, the maximum equivalent stress are increased from 13.89 MPa to 40.23 MPa. Therefore, reactor internal structures located in underwater condition shall consider carefully the hydrodynamic mass effects even though they have sufficient stiffness required for performing its functions under the dry condition.

되먹임 효과를 이용한 회전체의 속도측정 (Measurement of angular velocity using the self-mixing effect of semiconductor laser)

  • 이병욱
    • 한국광학회지
    • /
    • 제11권4호
    • /
    • pp.250-254
    • /
    • 2000
  • 반도체 레이저 광원의 되먹임 효과를 이용하여 레이저 도플러 속도계를 구현하였다. 움직이는 물체의 표면에 조사된 레이저광이 산란될 때 산란광은 물체의 속도에 비례한 도플러 변이를 일으킨다. 산란광의 일부를 레이저 공진기 내부로 입사키면 공진기 안에서는 발진광과 입사된 산란광이 혼합되어 두 개 광 사이의 차주파수로 레이저 전류가 변조되는 원리를 이용한 것이다. 본 실험에서는 원형 회전체에 레이저를 조사할 때 발생하는 산란광을 사용하여 회전 속도와 도플러 편이 주파수와의 관계를 비교하였다. 또한 회전면에 대한 레이저 입사 각도에 따른 도플러 주파수의 변화를 관찰하였다. 이로부터 도플러 주파수와 회전체 각속도 사이의 비례 관계 및 측정광의 입사 각도와의 선형성을 확인하였다.

  • PDF

주파수 변조 분사가 횡단 유동장의 분무 특성에 미치는 영향 (Spray Characteristics of Modulated Liquid Jet Injected into a Subsonic Crossflow)

  • 이민철;김종현;구자예
    • 한국분무공학회지
    • /
    • 제14권2호
    • /
    • pp.59-64
    • /
    • 2009
  • These experiments are close examination of spray characteristics that are continuous liquid jet and modulated liquid jet. The experiments were conducted using water, over a range of crossflow velocities from $42{\sim}l36\;m/s$, with modulation frequencies of $35.7{\sim}166.2\;Hz$. Between continuous crossflow jet and modulated cross-flow jet of penetration, breakup point, spray angle and macro spray shape are experimentally investigated with image analysis. In cross-flow field, main parameter of liquid jet for breakup was cross-flow stream rather than modulation effect. As oscillation of the periodic pressure that could make liquid jet moved up and down, the mixing efficiency was increased. Also, a bulk of liquid jet puff was detected at upper field of liquid surface. So, this phenomenon has a good advantage of mixing spray from concentration of center area to outer area. Because of modulation frequency, SMD inclination of the structured layer was evanescent. Cross-sectional characteristics of SMD at downstream area were non-structured distributions. Then cross-sectional characteristics of SMD size were about same tendency over a range that is effect of spray mixing. The tendency of volume flux value for various modulation frequency was same distribution. And volume flux was decreased when the modulation frequency increase.

  • PDF

음향에너지를 이용한 내부 혼합형 이유체 분사노즐의 분무특성 (Spray Characteristics of Internal-Mixing Twin-Fluid Atomizer using Sonic Energy)

  • 조형건;강원수;석지권;이근선;이충원
    • 한국분무공학회지
    • /
    • 제4권3호
    • /
    • pp.32-41
    • /
    • 1999
  • In this research, internal-mixing twin-fluid atomizer using sonic energy is designed and manufactured. We are trying to intimate high efficiency twin-fluid atomizer to obtain good liquid atomization in the low pressure region. Define of geometric form of atomizer, characteristics of spray is influenced by position, depth and height variation of cavity resonator, variation of sound intensity and resonant sound frequency with liquid flow rate. The liquid atomization is promoted by multi-stage disintegration of mixing flow of gas with liquid and the optimum condition of position and depth of cavity resonator according to sonic energy is obtained from the condition at a=2.5mm and L=2mm. The velocity distribution of droplets shows negative value due to recirculation region at the center of axial, and as the radial direction distance is far, the velocity distribution of droplets decrease slowly after having a maximum value. However velocity and SMD show nearly uniform distribution at the down stream and as result compared to Nukiyama and Tanasawa's equation. atomization of mixing flow with air and liquid dispersing from the outlet of the nozzle is promoted by the effect of collision at the cavity resonator.

  • PDF

비대칭 미세전극을 이용한 동시 혼합 및 펌핑 (Simultaneous mixing and pumping using asymmetric microelectrodes)

  • 김병재;윤상열;이경헌;성형진
    • 한국가시화정보학회:학술대회논문집
    • /
    • 한국가시화정보학회 2007년도 추계학술대회
    • /
    • pp.77-83
    • /
    • 2007
  • This paper presents numerical and experimental works for simultaneous pumping and mixing small liquid using asymmetric microelectrode arrays, based on AC electroosmotic flows. To this end, four arrangements of electrode pairs were considered with diagonal/herringbone shapes. Numerical simulations were made of three-dimensional geometries by using the linear theory. The results indicated that the helical flow motions induced by the electrode arrays play a significant role in the mixing enhancement. The pumping performance was influenced by the slip velocity at the center region of the channel compared to that near the side walls. To validate the numerical predictions, the microfluidic devices were made through MEMS. The flow rate was obtained by using micro PIV, increasing the applied frequency. The electrolyte was potassium chloride solution. The flow patterns above electrodes were visualized to see lateral flow for mixing. The experimental results showed good agreements with the numerical predictions.

  • PDF

초음파 미세혼합기의 해석 및 설계 (Analysis and Design of Ultrasonic Micromixer)

  • 김덕종;허필우;박상진;김재윤;윤의수
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.101-106
    • /
    • 2003
  • In this work, mixing phenomena in the mixing chamber of a ultrasonic micromixer are analyzed through an analytical approach. A simplified 2-dimensional model for the ultrasonic micromixer is presented. Analytical solutions for fluid flow induced by ultrasonic waves are obtained through successive approximations method. From simulation results on thermal diffusion in the mixing chamber, effects of relative location, size, and vibration frequency of a piezoelectric material and aspect ratio of the mixing chamber on mixing performance of the ultrasonic micromixer are investigated. Finally, design guidelines for the ultrasonic micromixer are suggested based on the parametric study.

  • PDF

Photoacoustic Laser Doppler Velocimetrv Using the Self - mixing Effect of RF - excited CO2 Laser

  • Choi, Jong-Woon;You, Moon-Jong;Choi, Sung-Woong;Woo, Sam-Young
    • Journal of the Optical Society of Korea
    • /
    • 제8권4호
    • /
    • pp.188-191
    • /
    • 2004
  • A new laser Doppler velocimeter employing a $CO_2$ laser has been developed by using its photoacoustic effect. A change in the pressure of a discharge, induced by mixing of a returned wave with an originally existing wave inside the cavity, is employed to detect the Doppler frequency shift. We found that a Doppler frequency shift as small as 50 kHz was detected, and also a good linear relationship between the velocity and the Doppler frequency shift was obtained.