• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.19-24
• /
• 2020

The interest in renewable energy is increasing due to the depletion of fossil fuels. In particular, active research on wave power, which is highly predictable and abundant, is being conducted. The coaxial accelerator-type wave power generator used in this study was designed to improve the power generation efficiency by converting bidirectional linear motion into a rotational force. In an offshore engineering basin, waves were generated, and case tests were performed according to the wave period and wave height. The experimental results were verified by the theoretical method related to the frequency response, and the overall trend was confirmed to be consistent. These results are expected to be useful in estimating the power of wave generators and designing parameters to improve the efficiency of wave energy in the design stage before manufacturing. In addition, the manufacturer can predict the wave energy efficiency of wave generators, which can reduce the development time and cost by preventing trial and error processes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.324-334
• /
• 2017

The simulators for a plant unit master control (UMC) developed by domestic or overseas researchers have been developed for operator-training purposes. UMC simulators normally constructed at the end of the plant construction, despite the UMC logics, should be simulated to pre-check many signal interfaces within the power generation systems. Because of the differences in construction schedule, it is difficult for logic designers or commissioning engineers to simulate the UMC logic during the design or commissioning stage. In this background, this paper proposes a simulation method that can be used easily by plant logic designers or operators in the MATLAB Simulink programming environment. The core of the UMC is realized with a unique simulation algorithm based on mathematical analysis and functional blocks combination. In addition, an integer-based configuration was proposed to realize the plant target value control for the equipment in the logic. With these simulation methods, functions, e.g., load distribution, high-low limitations, frequency compensation, etc. were simulated. The results showed that the plant UMC logic can be simulated in Simulink without a plant simulator. The various functions proposed in this paper can provide useful information about Simulink-based simulation design for plant logic designers or commissioning engineers during the power plant construction period.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.1
• /
• pp.53-60
• /
• 2008

A RF environmental field test for the proposed Galileo Sensor Station site was done by Alcatel Alenia technical team contracted by European Space Agency (ESA) and the Space Geodesy division of Korea Astronomy and Space Science Institute at the Korean VLBI Hetwork (KVN) site in Tamla University Campus, Jeju from June 21, 2007 to June 24, 2007. Full band and in-band 24 hour observation for radio frequency interference, precise positioning, and multipath on three proposed antenna locations for Galileo signal were executed. The main purpose of this survey is to verify the results of previous test on 2006 by KASI. The preliminary analysis of the results and a full investigation also had been done by ESA under the permission of KASI until the end of July, 2007.

• Journal of the Korean Society of School Health
• /
• v.11 no.1
• /
• pp.63-74
• /
• 1998

The purposes of this study are to show in interpersonal relations what factors male students are stressed from, how they experience stress, how they cope With it in each situation, and what this results in It attempt to gam basic materials to promote male student health and positive coping methods, The subject of this study was 15 male students of C University located in Seoul and Kyeonggui-Do They were composed of 5 sophomores, 5 Juniors and 5 seniors The period for collecting materials was October 1997 to January 1998, and the interview time ranged from 50 minutes to two hours The interview frequency was one to three times as occasion demanded, The materials were analyzed by the methods and theory suggested by Strauss & Corbin (1990) The results were 130 categories grouped into 33 divisions by similarity Finally, they were united into 9 higher categories In interpersonal relations the core category of male student stress is "affliction", and it follows the course of generation-coping-resolution The types showed in the course of material analysis are as follows, (1) When the subject student is on good terms with the other and the stress is repeated- "affliction" is strong and continuous-and his ability sense is strong, he copes with "affliction" With his own will and solves It affirmatively, (2) When the subject student is on good terms with the other and the stress is repeated-so "affliction" is strong and continuous-and his ability sense is weak, he copes with "affliction" with an emotional bias and solves it negatively (3) When the subject student is on good terms with the other and the stress is temporary-"affliction" is strong and temporary-and his ability sense is strong, he copes with "affliction" with his own will and solves it affirmatively (4) When the subject student becomes estranged from the other and the stress is temporary-"affliction" is weak and temporary-and his ability sense is weak, he copes with "affliction" with an emotional bias and solves it negatively, (5) When the subject student becomes estranged from the other and the stress is repeated-"affliction" is strong-and continuous and his ability sense is strong, he copes with "affliction" with his own will and solves it affirmatively (6) When the subject student becomes estranged from the other and the stress is repeated-"affliction" is strong and continuous-and his ability sense is weak, he copes with "affliction" with an emotional bias and solves it negatively. According to the above results, the conditions of cause and effect for male students to generate "affliction" should be understood in order to help cope with stress caused by interpersonal relations A program for education and counseling should be developed for male students to strengthen their 'ability sense' in choosing coping strategies In addition, the individual estimation for ability sense should be performed when education and counseling them.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.703-711
• /
• 2018

Water distribution system (WDS) pipe bursts are caused from excessive pressure, pipe aging, and ground shift from temperature change and earthquake. Prompt detection of and response to the failure event help prevent large-scale service interruption and catastrophic sinkhole generation. To that end, this study proposes a improved Western Electric Company (WECO) method to improve the detection effectiveness and efficiency of the original WECO method. The original WECO method is an univariate Statistical Process Control (SPC) technique used for identifying any non-random patterns in system output data. The improved WECO method multiples a threshold modifier (w) to each threshold of WECO sub-rules in order to control the sensitivity of anomaly detection in a water distribution network of interest. The Austin network was used to demonstrated the proposed method in which normal random and abnormal pipe flow data were generated. The best w value was identified from a sensitivity analysis, and the impact of measurement frequency (dt = 5, 10, 15 min etc.) was also investigated. The proposed method was compared to the original WECO method with respect to detection probability, false alarm rate, and averaged detection time. Finally, this study provides a set of guidelines on the use of the WECO method for real-life WDS pipe burst detection.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.2
• /
• pp.541-549
• /
• 2015

Triple negative breast cancer (TNBC) is an aggressive subtype of breast cancer (BC) with higher metastatic rate and both local and systemic recurrence compared to non-TNBC. The generation of reactive oxygen species (ROS) secondary to oxidative stress is associated with DNA damage, chromosomal degradation and alterations of both hypermethylation and hypomethylation of DNA. This study concerns differential methylation of promoter regions in specific groups of genes in TNBC and non-TNBC Saudi females in an effort to understand whether epigenetic events might be involved in breast carcinogenesis, and whether they might be used as markers for Saudi BCs. Methylation of glutathione S-transferase P1 (GSTP1), T-cadherin (CDH13), Paired box protein 5 (PAX5), death associated protein kinase (DAPK), twist-related protein (TWIST), DNA-binding protein inhibitor (ID4), High In Normal-1 (HIN-1), cyclin-dependent kinase inhibitor 2A (p16), cyclin D2 and retinoic acid receptor-${\beta}$ ($RAR{\beta}1$) genes was analyzed by methylation specific polymerase chain reaction (MSP) in 200 archival formalin-fixed paraffin embedded BC tissues divided into 3 groups; benign breast tissues (20), TNBC (80) and non-TNBC (100). The relationships between methylation status, and clinical and pathological characteristics of patients and tumors were assessed. Higher frequencies of GSTP1, ID4, TWIST, DAPK, PAX5 and HIN-1 hypermethylation were found in TNBC than in non-TNBC. Hypermethylation of GSTP1, CDH13, ID4, DAPK, HIN-1 and PAX5 increased with tumor grade increasing. Other statistically significant correlations were identified with studied genes. Data from this study suggest that increased hypermethylation of GSTP1, ID4, TWIST, DAPK, PAX5 and HIN-1 genes in TNBC than in non-TNBC can act as useful biomarker for BCs in the Saudi population. The higher frequency of specific hypermethylated genes paralleling tumor grade, size and lymph node involvement suggests contributions to breast cancer initiation and progression.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.225-235
• /
• 2020

Ultrasonic investigation of damage detection has been widely used for non-destructive testing of various concrete structures. This study focuses on damage detection analysis with the aid of wave propagation in two-phase composite concrete with aggregate (inclusion) and mortar (matrix). To fabricate a realistic simulation model containing a variety of irregular aggregate shapes, the mesh generation technique using an image processing technique was proposed. Initially, the domains and boundaries of the aggregates were extracted from the digital image of a typical concrete cut-section. This enables two different domains: aggregates and mortar in heterogeneous concrete sections, and applied the grids onto these domains to discretize the model. Subsequently, finite element meshes are generated in terms of spatial and temporal requirements of the model size. For improved analysis results, all meshes are designed to be quadrilateral type, and an additional process is conducted to improve the mesh quality. With this simulation model, wave propagation analyses were conducted with a central frequency of 75 kHz of the Mexican hat incident wave. Several void damages, such as needle-shaped cracks and void-shaped holes, were artificially introduced in the model. Finally, various formats of internal damage were detected by implementing energy mapping based signal processing.

• Journal of The Korean Association For Science Education
• /
• v.37 no.6
• /
• pp.1005-1014
• /
• 2017

Focusing on the role of the science museum as an institution to improve the scientific literacy of the public, this study investigated public perception and behavior about science museum to know how much science museums affect the public by using social media big data analysis. For this purpose, we extracted texts containing 'science museum' in Naver blogs and Twitter, analyzed them by using network, frequency, co-ocurrence, and semantics analysis and compared them with the results in English speaking countries. As a result, blogs were mainly concerned with science museum among parents who have young children, while in Twitter posts from many students who visited as a group appeared. Therefore, the Korean public used science museum mainly as a space for children's experience, and in this case, programs and exhibitions of science museums are perceived positively. On the other hand, students who visited as a group showed some negative emotions. The result of comparison with the cases of foreign countries in terms of the function of the third generation science museum such as communications with the science museum and the public and the participation of the public in science, the Korean public hardly mentioned the scientific contents, words related to communications such as 'argue', and curators or staff after visiting the science museum. In contrast to many verbs related to meaningful activities such as 'learn', 'participate', 'listen', 'read', 'ask', 'think' appeared in English, only a small number of verbs include 'ask' and 'thin' appeared in Korean. Therefore, science museum need to improve impression, communicating with public, and involving activity with impact and variety after visit.

• Culinary science and hospitality research
• /
• v.23 no.2
• /
• pp.169-180
• /
• 2017

The current study aims to demonstrate the causal relationships of quality of work life (QWL), affective organizational commitment, and turnover intention among Y-Generational chefs in South Korea. In order to achieve the study purpose, the data were collected from 207 chefs working in hotel restaurants, independent restaurants, and franchised restaurants. To analyze the data, frequency analysis, exploratory factor analysis, reliability analysis, regression analysis, and PROCESS Macro analysis were undertaken using SPSS 18.0. The results indicated that quality of work life consisted of two factors named as personal quality and social quality. Both factors of quality of work life had significantly positive effect on affective organizational commitment. However, in case of the relation between quality of work life and turnover intention, only personal quality had a significant negative effect on turnover intention while the effect of social quality on turnover intention was not significant. Furthermore, affective organizational commitment negatively affected turnover intention, and affective organizational commitment was determined as significant mediators between quality of work life and turnover intention. Implications of the empirical results and limitations of the study are also discussed.