• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.9-14
• /
• 2023

In this study, an experiment was conducted to confirm the applicability of the external shape control of the ultrasonic knife to the CFRTP material, which is the base material of thermoplastic. TC910 based on polyamide6 (PA6) was used as the material. The slope 와 and tool transfer speed of the material and tool were selected as process factors for processing, and the following results were obtained. Under all cutting conditions using an ultrasonic knife, friction heat caused by high-frequency vibration was issued at 150℃ at the contact part between the material and the knife during cutting. As a result of the cutting force analysis, the faster the transfer speed, the higher the cutting force as the angle of entry of the blade increased, and the size of the cutting force changed during cutting. As for the size of the burr in accordance with the transfer speed condition, the smallest burr occurred at 150mm/min in the side part, and the smallest burr occurred at 150mm/min and 200mm/min in the case of the outlet burr. The size of the burr according to the entry angle tended to decrease as the tool entry angle increased, and the side part tended to increase as the tool entry angle increased. As a result of the cutting surface analysis, it was confirmed that the base material was eluted under all conditions, and the faster the transfer speed, the lower the elution phenomenon of the base material. Based on the above results, cutting the CFRTP material with an ultrasonic knife is possible, but the effect on heat generation caused by friction needs to be minimized, and further research needs to be conducted on this.

• Progress in Medical Physics
• /
• v.33 no.4
• /
• pp.164-171
• /
• 2022

The number of facilities using radiation generators increases and related regulations are strengthened, the establishment of a shielding management and evaluation technology has become important. The characteristics of the radiation generator used in previous report differ from those of currently available high-frequency radiation generators. This study aimed to manufacture lead, iron, and concrete shielding materials for the re-verification of half-value layers, tenth-value layers, and attenuation curve. For a comparison of attenuation ratio, iron, lead, and concrete shields were manufactured in this study. The initial dose was measured without shielding materials, and doses measured under different types and thicknesses of shielding material were compared with the initial dose to calculate the transmission rate on 50-300 kVp X-ray. All the three shielding materials showed a tendency to require greater shielding thickness for higher energy. The attenuation graph showed an exponential shape as the thickness decreased and a straight line as the thickness increased. The difference between the measurement results and the previous study, except in extrapolated parts, may be due to the differences in the radiation generation characteristics between the generators used in the two studies. The attenuated graph measured in this study better reflects the characteristics of current radiation generators, which would be more effective for shield designing.

• Journal of Animal Reproduction and Biotechnology
• /
• v.38 no.3
• /
• pp.158-166
• /
• 2023

Background: Copy number variation (CNV) can be identified using next-generation sequencing and microarray technologies, the research on the analysis of its association with meat traits in livestock breeding has significantly increased in recent years. Hanwoo is an inherent species raised in the Republic of Korea. It is now considered one of the most economically important species and a major food source mainly used for meat (Hanwoo beef). Methods: In this study, CNVs and the relationship between the obtained CNV regions (CNVRs) can be identified in the Hanwoo steer samples (n = 473) using Illumina Hanwoo SNP 50K bead chip and bioinformatic tools, which were used to locate the required data and meat traits were investigated. The PennCNV software was used for the identification of CNVs, followed by the use of the CNV Ruler software for locating the different CNVRs. Furthermore, bioinformatics analysis was performed. Results: We found a total of 2,575 autosomal CNVs (933 losses, 1,642 gains) and 416 CNVRs (289 gains, 111 losses, and 16 mixed), which were established with ranged in size from 2,183 bp to 983,333 bp and 10,004 bp to 381,836 bp, respectively. Upon analyzing the restriction of minor alleles frequency > 0.05 for meat traits association, 6 CNVRs in the carcass weight, 2 CNVRs in the marbling score, 3 CNVRs in the backfat thickness, and 2 CNVRs in the longissimus muscle area were related to the meat traits. In addition, we identified an overlap of 347 CNVRs. Moreover, 3 CNVRs were determined to have a gene that affects meat quality. Conclusions: Our results confirmed the relationship between Hanwoo CNVR and meat traits, and the possibility of overlapping candidate genes, annotations, and quantitative trait loci that results depended on to contribute to the greater understanding of CNVs in Hanwoo and its role in genetic variation among cattle livestock.

• Journal of the Korean Society of Safety
• /
• v.38 no.5
• /
• pp.1-7
• /
• 2023

This study analyzes the operational characteristics of 311 aged and non-aged residual current circuit breakers (RCCBs) in low-voltage consumer contexts. It investigates the influence of external temperature and harmonics based on the rated current multiples. To simulate temperature variations, a convectional oven was used around the circuit breakers. Additionally, the generation of harmonic reference signals and data measurement for overcurrent experiments were conducted using NI SCXI, myDAQ, and LabVIEW. An observation revealed that as the ambient temperature increased, the operating time of RCCBs decreased in the time delay region. This was attributed to the faster response or bending of the bimetal, which is the tripping element. However, aged RCCBs encountered challenges with tripping outside the protective curve. The operating time of the circuit breakers exhibited an acceleration influenced by the order and content of harmonic currents, potentially leading to malfunctions. Aged RCCBs demonstrated faster operating times than their non-aged counterparts. However, the difference in operating time varied based on the manufacturer's and operating environment of the RCCBs. Frequent malfunctions of RCCBs can result in power outages. In cases where these circuit breakers fail to operate, they can lead to secondary damages, including electrical fires and shocks. Consequently, it is imperative to consider the operating environment of RCCBs and provide appropriate replacement cycles to mitigate these risks.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.44-50
• /
• 2009

While American acoustics had been lagged behind European one in the nineteenth century, Alfred Mayer greatly contributed to enhance American experimental acoustics. He inherited experimental skills in collaboration with Koenig in Paris, and got chances to obtain research ability from leading researchers such as Rayleigh during his visit to England. His accomplishments, which brought him fame in Europe, included the creation of the acoustic pyrometer which measured the high temperature by means of the thermal change of the sound velocity, the discovery of mosquito's hearing by selective resonance, the formalization of the duration of the residual sensation of sound, the invention of the topophone which searched for the direction of the sound source, the construction of the apparatus for visualizing the frequency of sound and so on. He not only added new research results to Europe's acoustics but applied acoustics to physical education to help produce the next generation of American acousticians.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.273-282
• /
• 2024

Park golf is establishing itself as a daily sport that the silver generation can enjoy physically and cost-free. Accordingly, we have examined the impact of park golf participants' passionate participation behavior on sports immersion and sports performance. The subjects were 243 park golf participants, and SPSS 21.0 and AMOS 18.0 were used for data processing. In addition, frequency analysis, reliability, confirmatory factor analysis, and correlation analysis were conducted. Path analysis was performed using SEM, and mediating effects were analyzed using bootstrapping. First, regarding the relationship between passionate behavior and sports immersion, harmonious passion did not affect sports immersion, and obsessive passion had a positive effect. Second, passion had a positive effect on sports performance. Third, sports immersion had a positive effect on sports performance. Fourth, sports commitment played a partial mediating role in the relationship between passion and sports performance. Therefore, if the environment of the park golf course is improved so that passion does not decrease, exercise immersion and exercise performance will improve.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.1
• /
• pp.9-17
• /
• 2024

It is widely recognized that for 3D human pose estimation (HPE), dataset acquisition is expensive and the effectiveness of augmentation techniques of conventional visual recognition tasks is limited. We address these difficulties by presenting a simple but effective method that augments input images in terms of viewpoints when training a 3D human pose estimation (HPE) model. Our intuition is that meaningful variants of the input images for HPE could be obtained by viewing a human instance in the images from an arbitrary viewpoint different from that in the original images. The core idea is to synthesize new images that have self-occlusion and thus are difficult to predict at different viewpoints even with the same pose of the original example. We incorporate this idea into the training procedure of the 3D HPE model as an augmentation stage of the input samples. We show that a strategy for augmenting the synthesized example should be carefully designed in terms of the frequency of performing the augmentation and the selection of viewpoints for synthesizing the samples. To this end, we propose a new metric to measure the prediction difficulty of input images for 3D HPE in terms of the distance between corresponding keypoints on both sides of a human body. Extensive exploration of the space of augmentation probability choices and example selection according to the proposed distance metric leads to a performance gain of up to 6.2% on Human3.6M, the well-known pose estimation dataset.

• Journal of Environmental Science International
• /
• v.33 no.9
• /
• pp.645-665
• /
• 2024

For volatile organic compounds (VOCs) emanating from workplaces within the Noksan national industrial complex, the emission characteristics of pollutants were identified through zone-based measurements using vehicles equipped with selective ion flow tube mass spectrometry(SIFT-MS). The average concentration of total VOCs was higher in zones 2, 4, and 5 than in zones 1, 3, and 6, and was 2.1 to 4.2 times higher than background concentrations. The average concentrations of pollutants investigated were (from highest to lowest) methyl ethyl ketone, formaldehyde, methanol, and n-hexane. However, the pollutants that should be prioritized for reduction to decrease ozone generation were (from highest to lowest) methyl ethyl ketone, n-hexane, for maldehyde, and ethylbenzene+xylene. Benzene, a substance governed by atmospheric environmental standards, exhibited a frequency distribution exceeding the stipulated limits, and concentrations exceeding 100 ppb were identified for methyl ethyl ketone, methanol, toluene, and n-hexane. In certain class 4 and 5 workplace facilities, VOC emissions and emission prevention installations were inadequately managed, necessitating the formulation of management measures for small enterprises. Also, workplaces that emit large amounts of VOCs need to upgrade to VOC-prevention installations with higher processing efficiencies. To efficiently monitor VOCs in a wide range of areas, such as the Noksan national industrial complex, it is considered appropriate to monitor workplaces that emit high concentrations of VOCs using mobile SIFT-MS in real time rather than relying on fixed monitoring methods. A specialized method targeting approximately 10 VOCs is necessary to quickly track emission sources.Furthermore, it is essential to phase in a system for the intensive management of suspected workplaces based on accumulated data from SIFT-MS in areas where high VOC concentrations are measured and to establish a cooperative system for sharing data between relevant institutions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.407-410
• /
• 2018

As the operating frequency of an electromagnetic wave increases, the maximum output and wavelength of the wave decreases, so that the size of the circuit cannot be reduced. As a result, the fabrication of a circuit with high power (of the order of or greater than kW range) and terahertz wave frequency band is limited, due to the problem of circuit size, to the order of ${\mu}m$ to mm. In order to overcome these limitations, we propose a source design technique for 0.1 THz~0.3 GW level with cylindrical shape (diameter ~2.4 cm). Modeling and computational simulations were performed to optimize the design of the high-power electromagnetic sources based on Cherenkov radiation generation technology using the principle of plasma wakefield acceleration with ponderomotive force and artificial dielectrics. An effective design guideline has been proposed to facilitate the fabrication of high-power terahertz wave vacuum devices of large diameter that are less restricted in circuit size through objective verification.

• Analytical Science and Technology
• /
• v.19 no.6
• /
• pp.535-543
• /
• 2006

Being used widely in semiconductor and display manufacturing, $NF_3$ is internationally considered as one of the regulated compounds in emission. Numerous companies have been continuously trying to reduce the emissions of $NF_3$ to comply with the global environmental regulation. This work is made to report the destruction and removal efficiency (DRE) of electrically heated scrubbers and the use rate in process chambers installed in three main LCD manufacturing companies in Korea. As the measurement techniques for $NF_3$ emission, mass flow controlled helium gas was continuously supplied into the equipment by which scrubber efficiency is being measured. The partial pressures of $NF_3$ and helium were accurately measured for each sample using a mass spectrometer, as it is emitted from inlet and outlet of the scrubber system. The results show that the DRE value for electrically heated scrubbers installed before 2004 is less than 52 %, while that for the new scrubbers modified based on measurement by scrubber manufacturer has been sigificentely improved upto more than 95 %. In additon, we have confirmed the efficiency depends on such variables as the inlet gas flow rate, water content, heater temperature, and preventative management period. The use rates of $NF_3$ in process chambers were also affected by the process type. The use rate of radio frequency source chambers, built in the $1^{st}$ and $2^{nd}$ generation process lines, was determined to be less than 75 %. In addition, that of remote plasma source chambers for the $3^{rd}$ generation was measured to be aboove 95 %. Therefore, the combined application of improved scrubber and the RPSC process chamber to the semiconductor and display process can reduce $NF_3$ emmision by 99.95 %. It is optimistic that the mission for the reduction of greenhouse gas emission can be realized in these LCD manufacturing companies in Korea.