• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.865-870
• /
• 2001

In this paper, we analyse the effect of phase noise from PLL frequency synthesizer on 64 QAM when detecting corrupted signals. To predict the phase noise of an oscillator very accurately, we assume that the oscillator is linearly time-varying when the input impulsive current to the oscillator is small. The performance of the detector which detects the corrupted signal by oscillator phase noise is compared with that when the detector is only affected by AWGN and then analyse how much the phase noise degrades the system performance for 64 QAM.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1129-1132
• /
• 2003

본 논문에서는 위상/주파수 검출기을 설계시 문제가 되는 Reference Spur을 없게 하여 Low Noise를 구현할 수 있는 No Spike PFD(Phase Frequency Detector)를 제안한다. 위상동기루프의 특별한 형태로 차지 펌프 위상동기루프가 있다. 차지 펌프위상동기 루프는 일반적으로 3-state 위상/주파수 검출기를 이용한다. 이 3-state 위상/주파수 검출기는 기준 신호와 VCO 출력 신호의 위상차에 비례하는 디지털 파형으로 출력을 내보낸다. 차지 펌프 위상동기루프 그림 1 처럼 디지털 위상/주파수 검출기(PFD), 차지 펌프(CP), 루프 필터(LF), VCO로 구성된다. PFD 는 기준 신호와 VCO 에 의해 만들어진 출력 신호를 입력받아 각각의 위상과 주파수를 비교한다. 즉, 출력 신호가 기준 신호보다 느릴 때에는 출력 신호를 앞으로 당기기 위해서 up 신호를 넘겨주고, 출력 신호가 기준 신호보다 빠를 때에는 출력 신호를 뒤로 밀기 위해 down 신호를 넘겨준다. 차지 펌프(CP)의 전류를 Ip 라고 한다면, CP 에서 LF 로 흐르거나, LF에서 CP로 흐르는 전류 Ip의 평균량이 기준 신호와 VCO 출력 신호의 위상차에 비례하는 것이다.

• Tribology and Lubricants
• /
• v.26 no.2
• /
• pp.97-104
• /
• 2010

A new magnetoelastic technique of oil viscosity measurement, where the oil viscosity is estimated by frequency shift of natural oscillations of magnetoelastic ribbon, is implemented in this study. Laboratory tests of the detector prototype are performed for measurement of viscosity of base synthetic and mineral oils. It was found that measurement accuracy was better when damping factor was estimated in comparison with accuracy of frequency of damped oscillations. Thus the oil viscosity was calibrated as a function of number of pulses of the damped oscillations of magnetoelastic ribbon. Result generally showed that developed detector is promising for in line oil viscosity measurement in wide viscosity range from 10 cSt up to 600 cSt, while the viscosity measurement was relatively instable when the viscosity of test oil was over 400 cSt.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.454-458
• /
• 2003

It is well known that the antenna for wireless Tx/Rx isolation detector should have the broadband characteristics. Such antennas can be applied in all the frequency ranges such as Cellular, PCS, IMT-2000. In this paper, using the Finite-Difference Time-Domain(FDTD) method, one design example is given for the antenna operating in the frequency ranges of $800MHz{\sim}900 MHz$, $1.7GHz{\sim}2.2GHz$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.572-579
• /
• 1992

In this thesis, feedback circuit and FM detector applied to superheterodyne receiver to extract audio signal without random noise Is implemented. The feedback loop circuit converts 45MHz received signal to 4SiKHz If signal containing mess-age without random noise. Also the feedback loop provides the End local frequency, so narrowband BPF which is containing maximum Doppler frequency without message Is needed. Finally, quadrature FM detector extract audio signal by synthesis o350" shifted signal and ampli-tude limited signal. RSSI characteristics is measured and audio characteristics Is compared with existing If module.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2527-2529
• /
• 1998

Measurement equipment, which consists of He-Ne laser, objective lens, CCD camera and position sensitive detector, was developed for the dynamic response of micromirror. This equipment can measure the tilting direction and angle, the rise time and frequency response of micromirror to the input signal. It was found that the rise time of the micromirror was less than 10${\mu}m$ and the resonant frequency was about 25kHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1000-1006
• /
• 2007

This paper presents a power detector circuit which monitors the transmitting power for the application in CDMA cell phones. The proposed power detector are composed of coupler for coupling output power and detector fur monitoring output power. The designed coupler has low loss characteristic because it adopts the stripline structure which consists of two ground planes at both sides of signal plane. The design frequency is 824-849MHz which is the Tx band fur CDMA mobile terminal, and the coupling factor of the stripline coupler is -20dB. A schottky barrier diode is adopted for detector design because of its high speed operation with minimized loss. The required impedance matching is performed to improve the linearity and sensitivity of output voltage at relatively low detector input level where the nonlinear characteristic of diode exists. The package parasitics as well as intrinsic diode model are considered for simulation of the detector. The predicted performances agree well with the measured results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.621-627
• /
• 2008

This paper presents a compact and miniaturized power detector utilizing low temperature co-fired ceramics(LTCC) technology for the application in wireless handset system to monitor the transmitting power at the frequency of 824-849MHz. The proposed power detector is composed of detector diode, lumped components for matching network, and LTCC stripline coupler based on LTCC substrate technology. A 20dB LTCC stripline direction coupler is designed and implemented with many bending section in order to reduce the practically occupied area for miniaturization. A zero bias schottky diode is adopted for detector design because of its high speed operation with minimized loss. The measured performances of fabricated detector agree well with the predicted results with a good linearity within the effective input RF power range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.745-752
• /
• 2005

In this paper we propose and implement a digital part of a receiver system for identifying a moving object and its tracking position in wireless environment. We assumed UWB(Ultra Wide Band)-based communication system for target application and used serial communication method(RS-232). The proposed digital receiver consists of RS-232-type1/RS-232-type2 for input and output of serial communication, ID Detector for detecting IDs, and PISO&Buffer circuit to buffer input signals for appropriate operation of ID Detector. We implemented the digital receiver with minimal hardware(H/W) resource according to target application of UWB-based communication system. So it correlates input patterns with pre-stored patterns though repeated detecting method for multiple IDs. Since it has reference panerns in the Ve-stored form, it can detect various IDs instantly. Also we can program content and size of reference patterns considering compatibility with other systems .The implemented H/W was mapped into XC2S100PQ208-5 FPGA of Xilinx, occupied 727($30\%$) cells, and stably operated in the clock frequency of 75MHz(13.341ns).

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.689-694
• /
• 2008

This paper proposes a roll rate estimation method for spinning vehicles. The carrier phase and frequency variations caused by spinning of vehicles are observed and the roll rate estimator is designed on the observation. The roll rate estimator consists of phase detector and zero crossing counter. The phase detector computes phase variation using in-phase and quadrature value from the correlator. By using zero crossing counter, the roll rate can be estimated since the output of phase detector is changed in proportion to the roll rate. Experiment a results show that estimated roll rate error is smaller than 0.0578Hz.