• IE interfaces
• /
• v.20 no.2
• /
• pp.204-215
• /
• 2007

This paper addresses vehicle routing planning in freight container transportation systems where a number of loaded containers are to be delivered to their destination places. The system under consideration is static in that all transportation requirements are predetermined at the beginning of a planning horizon. A two-phased procedure is presented for freight container transportation. In the first phase, the optimal model is presented to determine optimal total time to perform given transportation requirements and the minimum of number of vehicles required. Based on the results from the optimal model, in the second phase, ASA(Accelerated Simulated Annealing) algorithm is presented to perform all transportation requirements with the least number of vehicles by improving initial vehicle routing planning constructed by greedy method. It is found that ASA algorithm has an excellent global searching ability through various experiments in comparison with existing methods.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.2
• /
• pp.192-202
• /
• 2008

Typical activity-based travel analysis has been focused on passenger travel using household survey data. The current research focuses on freight transport using one-day travel survey data. Passenger travel can be seen as the outcome of traveller's subjective decision-making, whereas freight transport is the outcome of shipper or transport company's optimized scheduling. The research conducts an activity-based analysis of freight-vehicle trip chains. In particular, the research focuses on the difference in travel pattern between shipper-oriented private vehicle and transport company-oriented business vehicle. The research analyzed the travel diary of freight vehicles collected as part of the third national logistic survey in 2005. The diary is freight driver's one-day travel record including the information of loading capacity, item transported, destination, arrival time, etc. The analysis results show the difference between private and business vehicles in the travel pattern regarding the sequences of destination, destination type and item transported and the multi-dimensional information of the three sequences.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.224-228
• /
• 2017

Recently, in order to improve the efficiency of freight transportation on existing lines, a new freight train model is needed to develop urgently. The weight balance of the cargo for the freight vehicle is very important for the stability of the running train and the safe transportation of the cargo. For achieving the cargo weight balance, we proposed a Cargo Balancing Control(CBC) system on the Freight vehicle equipped in between under frame of car body and bogie system. The Cargo Safety Monitoring(CSM) system was designed to supervise status of the Cargo on freight train. The monitoring system can display real time status data from sensors and various signals effectively. We suggested that this paper is a very useful approach for keeping the safety of running freight trains on existing lines.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.209-215
• /
• 2002

In this paper, we propose a freight and fleet optimization model under CVO environment. The model is a kind of multi commodity network flow model based on Vehicle Routing Problem(VRP) and Vehicle Scheduling Problem(VSP), and considering operations and purposes of CVO. The main purpose of CVO is the freight and fleet management to reduce logistics cost and to Improve in vehicle safety. Thus, the objective of this model is to minimize routing cost of all the vehicle and to find the location of commodities which have origin and destination. We also present some computing test results.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.193-201
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed but also to reduce the vibration of the train. In this study an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral and yawing motion of the car body, the bogie, and the wheelset. Numerical analysis for the nonlinear equation motions with 17 degrees of freedom showed the running stability and critical speed due to the snake motion. Also, the vibration modes of tile high speed freight car was calculated using ADAMS RAIL, which showed that the critical speed have the yawing modes of the car body and the bogie. Finally, this paper shows that the snake motion of the vehicle can be controlled with the modifications of the design parameters.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.38-44
• /
• 2009

Recently, automobile industry expands from mechatronics area through intelligent information area, and the telematics technology is one of the greatest developing points. The telematics is utilizing the on-board-unit of vehicle's communication system, and it provides necessary information and value-added service to vehicles as well as drivers. Most of the telematics offers the solution of searching a route or generates an optimal path. This paper investigates telematics with the logistics point of view, such as freight location tracking, vehicle emergency information, etc. The telematics is a core technology of automobile industry, and it becomes new business paradigm of IP(information provider). Especially, ETA(estimated arrival time) of freight and distribution tracing information are critical issues in the logistics industry. The successful integration with telematics is introduced in the paper.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.373-380
• /
• 2010

An interest is increased of environment and energy so, importance on railroad high energy efficiency is magnified. And after Gyeong-bu High speed rail is completed, share rate freight transportation of railroad is expected to be gradually increased due to expand investment for railroad and operate mainly freight transportation on convention line. Therefore a research on DMT freight cars is necessary under like this situation. In paper, we developed analysis model for DMT freight car and DMT freight was analyzed numerically using VI-Rail in each condition of railway having different curve and carried out vibration analysis on curving using developed analysis model. And we carried out test on driving stability follow changing curve radius then measure against UIC code 518.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.7
• /
• pp.637-642
• /
• 2011

The DMT freight is judged that economic performance is good because can increase cargoes than existing freight. However, the existing freight cars, each with a different balance to the body structure is bogie because the vibrations may occur. Thus, by minimizing vibration over the existing freight securing the safety of the driving if you will not have major problems in cargoes. In this study, multi-body dynamic analysis tool, VI-Rail using the actually Gyeongbu Railroad line and an empty, full freight condition include curve radius, track irregularity, The DMT freight of the derailed wagons were assessed for safety analysis. Full and empty freight conditions for parity in the Gyeongbu Railroad line(Dongdaegoo${\leftrightarrow}$Kyungsan) derailment safety analysis, such as derailment coefficient and the wheel unloaded, echoing the curve and the orbit is affected by the irregularity was found. Full freight condition than the empty conditions showed a significant derailment safety. Overall, the limits of derailment coefficient(Q/P = 0.8) and wheel unload decrement limits(${\triangle}P/P$ = 0.6) is less safe with me confirmed that the derailment safety.

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.210-218
• /
• 2007

Road freight transport industry in Korea contains many and complicate problems such as over supply of the vehicle caused by rapid policy changes, illegal multilevel transactions, poor truck drivers working environment, lack of road freight transport related statistics and so on. Korean government has developed various logistics industrial policy trying to solve these problems in various ways. However, the relationship among the problems and action plans has been more and more entangled since the part of suggested policies have made another perverted problems. These complex structure of the toad freight transport industry in Korea makes difficult to identify and to solve the problems. Causal map method helps to give a clean picture to understand the complex industry at a glance. This study contributes for visualization of the causal relationships among the existing problems and related policy issues in the road freight transport industry in Korea by causal map. This study could be helpful to develop the actual road freight transport industrial policies including the illogical multilevel and unfair transaction in Korea.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.1-9
• /
• 2005

An end beam is one of the most important structural members supporting uncovered freight under in-service loading. In general, it needs to endure over 25 years. However fatigue fracture has occurred at dynamic stress concentration location of the end beam because user's specifications demanded high speed and vehicle manufacturer made the uncovered freight car with comparatively low strength and stiffness. For durability analysis, finite element analysis is performed to evaluate the problem of uncovered freight structure and local strain. The uncovered freight car was operated on actual problematic railroad line to measure dynamic stress versus time history on the critical part from which a crack is initiated often. Rainflow cycle counting method was used to estimate fatigue damage at dangerous area under operating condition. Therefore, this study shows that analytical fatigue life at the end beam can be predicted on the basis of S-N curve and structure analysis and has a fairly good correlation with experimental fatigue life.