• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.13-21
• /
• 1998

This is a study on the natural vibration characteristics of Vehicle frame. Nowadays, many trucks freight the over-load, do the car designers consider the over-load about 200% in the design. It's necessary to make the model of a vehicle and simulate it for the test of driving condition, durability and vibration behavior before the vehicle is manufactured. If it is possible to make a simulation using the static and dynamic analysis, this is very useful in accomplishing an optimal design of the vehicle. In this paper, we studied the vibration characteristics of a truck body frame. The automobile body frame model for experiment is made smaller than real size frame with the ratio of 1/10. The vibration characteristics of a frame is considered as one of main factors in analyzing and improving the problem for ride comfort, noise and vibration reduction. Therefore, we experimented two method to neglect the nonlinearity. First is bolting and second is welding at the joint section. We compared computer simulation results and experimental data.

• Asia-Pacific Journal of Business
• /
• v.10 no.2
• /
• pp.117-130
• /
• 2019

The land transport industry is more important than the air transport or shipping industry. Land transport has the largest number of business and employees, and the fourth industrial revolution technology has recently infiltrated the most rapidly. In this paper, we examine the status, future prospects, and implications of the land transport industry in Korea for the past 7 years based on the statistical database and related literature. We survey the scope and characteristics of the freight truck or rail transport industry, government policies, and recent logistics industry trends. From the results of these current and forecast statistical surveys, we propose a way forward for the domestic transport business.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.53-59
• /
• 2019

To reduce the vibrations and shocks during the cargo transportation of high value-added goods, the vibration history was measured on the truck transportation section (Asan-Uiwang) and the freight train transportation section (Uiwang-Pusan). The internal vibrations of the container were obtained by attaching acceleration sensors in three axis directions (longitudinal, lateral. and vertical directions) on the front and rear bogies. The rail vibration profile (0.29Grms) proposed in ASTM D-4169 was approximately 50% higher than the truck vibration profile (0.54Grms). The overall vibration was 16% and 33 % lower in the longitudinal and transverse directions, respectively, compared to the ASTM truck transport vibration profile. On the other hand, the vertical vibration measurement history partially exceeded the ASTM truck transport vibration profile over the range, 4 - 15Hz, and over 60Hz. The vibration measurement history of the cargo train was similar to that of the road. The longitudinal and lateral vibration history was lower than the ASTM D-4169 rail vibration profile, while the vertical history was over 30Hz.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2010

Management of driver hours of service (HOS) for commercial vehicle operators has been a continual safety challenge. One of the more critical issues to government and motor carriers is fatigue and fatigue-related accidents. To reduce truck drivers’fatigue-related accident risk in other countries, the government issued the HOS regulations. However, korea government does not have any HOS regulations. The objective of this research gives the clues that korea should have the HOS regulation to reduce truck drivers’fatigue-related accident risk. This study examines the HOS regulation over other countries and conducts relative accident risk analysis using the real data from 3 freight companies. The data set includes 231 accident involved drivers and 462 non-accident drivers. Therefore, the size of the total data set is 693 drivers. One of the most important aspects of early studies of safety and HOS was the need to characterize continuous driving by using the notion of "survival". Subsequent research used a data replication scheme and logistic regression to capture the survival effect. This study uses time-dependent logistic regression. The test of significance between parameters indicates that the first three hours are almost the same risk. In the 10th hour of driving, the risk was more than 2.2times that in the baseline first hour. In conclusion, as driving time goes on, the crash risk increases.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.137-161
• /
• 2011

This paper deals with modal shift projects and policy of modal shift services at home and abroad. This study aims to review the results of foreign modal projects in advanced countries and to suggest policy directions for promoting modal shift services in Korea. This paper consists of three main sections: concept of modal shift policy; analysis of modal shift projects and policy at home and abroad; policy directions of modal shift services in Korea. In recent years, shippers who shift mode from truck to rail or coastal shipping are subsidized by the government. The government intends to encourage modal shift services of shippers, as shown in the example of Marco Polo in EU. It is identified that the government should devise effective policy for the successful implementation of truck-rail modal shift in Korea. It is suggested that the policy goal of modal shift must be clear and its attainment is feasible in order to promote modal shift services here. It also turns out that indirect supply policy works better than direct one. Freight transport environments differ between countries. It, thus, hard to directly apply foreign policies to Korea's freight transport field. Korea is at an inceptive stage of exploring foreign modal shift policies and promoting modal shift services in Korea. We will gain from the wide range of case studies, which analyze the modal shift successes and failures experienced by advanced countries. It is necessary to use them with care.

• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.418-429
• /
• 2013

This study assesses the appropriate amounts and applicable ranges of travel time values for freight transport modes in Korea. The findings suggest that it is possible to determine appropriate sizes and applicable ranges of travel time values of goods set for road transport mode (i.e. truck), whereas those for railway, inland waterway, marine, and air transport modes are not as easily estimated. The adequate travel time value for trucks is 20,000won/vehicle hour, and the application range of travel time value of trucks is 17,000~23,000won/vehicle hour considering other variables. The most adequate estimation method of determining the travel time value for road transport is the wage rate method, whereas the marginal rate of substitution method is more rational for railway, inland waterway, marine, and air transport modes considering the application purpose and characteristics of the goods transported.

• International Commerce and Information Review
• /
• v.15 no.2
• /
• pp.3-23
• /
• 2013

In 1997, 180 countries signed the Kyoto Protocol in Kyoto, Japan. The Kyoto Protocol came into force in February 2005. The agreement calls for industrialized nations to cut greenhouse gas emissions by 5 percent from 1990 levels by 2008 to 2012. One of those polices is a modal shift that change from road freight to sea, inland waterway and railroad transportation that is eco-friendly. The increase of road freight brings road congestion, accidents, logistic costs, air pollution and greenhouse gases. Railroads are superior than the other modes of transportation in mass transportability, high speed, timeliness, safety and environmental-friendliness, but the railway industry has been pushed behind in competition. Korean railroads were used by passengers and freight transport popularly until the middle of 20th century, however, by the sudden change of logistics environments, a shaving time efficiency being most important, railroad logistic lost its competitive power against the transportation by truck. From the research which sees consequently investigated a various policy, a system and a law about Chinese logistics industry and present condition of the Chinese goods enterprise and instance analysis of the large Chinese corporation that branch out to undeveloped markets led and a Chinese logistics industry and problem point escape hereafter the heightening of competitiveness plan which is rational under prsenting boil.

• Journal of Korea Port Economic Association
• /
• v.24 no.3
• /
• pp.79-99
• /
• 2008

All the major ports around the world as well as those in Korea have been exploring their own strategies to survive rapidly changing marine transport environment worldwide. In particular, Busan New Port under development still fails to meet expected logistical traffic, although it operates 6 berths. That is why it is necessary to point out current challenges in logistical strategy of Busan New Port for fully dealing with logistical traffic. Therefore, this study can propose the following ways to facilitate logistical traffic of Busan New Port. First, it is necessary to apply equal tariff to incentives given to shipping agent under the associations between existing harbors and Busan New Port. Second, it is required to increase governmental subsidy for truck freight transport. Third, it is demanded to seek possible ways to transport export and import freight and thereby create independent logistical traffic. Fourth, it is necessary to contact shipping agents residing in new ports and establish a logistical program for shipping freights via Europe, Middle East and Russia as well as those by way of North America, Japan, Korea and China, ultimately making sustainable marketing strategy to create a series of continuous transshipment freight, not temporary one. Finally, it is advisable to operate networked logistical programs with small- or medium-sized overseas shipping agents in business association with large-scale overseas shipping agents.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.5
• /
• pp.273-280
• /
• 2022

Along with the advancement of deep learning technology, securing high-quality dataset for verification of developed technology is emerging as an important issue, and developing robust deep learning models to the domestic road environment is focused by many research groups. Especially, unlike expressways and automobile-only roads, in the complex city driving environment, various dynamic objects such as motorbikes, electric kickboards, large buses/truck, freight cars, pedestrians, and traffic lights are mixed in city road. In this paper, we built our dataset through multi camera-based processing (collection, refinement, and annotation) including the various objects in the city road and estimated quality and validity of our dataset by using YOLO-based model in object detection. Then, quantitative evaluation of our dataset is performed by comparing with the public dataset and qualitative evaluation of it is performed by comparing with experiment results using open platform. We generated our 2D dataset based on annotation rules of KITTI/COCO dataset, and compared the performance with the public dataset using the evaluation rules of KITTI/COCO dataset. As a result of comparison with public dataset, our dataset shows about 3 to 53% higher performance and thus the effectiveness of our dataset was validated.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.73-81
• /
• 2009

While various factors in passenger and freight demand analysis affect on destination choice, a key factor, in general. is an attractiveness measure by size variable (e.g., population. employment etc) in destination zone. In order to measure the attractiveness, some empirical studies suggested that disaggregate gravity model are more suitable than aggregate gravity model. This study proposes that truck travelers trip diary data among Korean commodity flow data could be used to estimate the behaviors of incorporating trip departure time, activity duration and attractiveness in destination. As a result, the main findings of size and distance variables coincide with the conventional gravity model having a positive effect of population variable and a negative effect of distance variable. Due to disaggregate gravity modeling, the unique findings of this study reports that small trucks are more likely to choose short distance and early morning, morning peak and afternoon peak departure time choice. On the other hand, large trucks are more likely to choose long distance and night time departure time choice.