• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.61-74
• /
• 2011

This is a fundamental research on use as fill material of lightweight waste such as bottom ash and tire shred. We carried out the test for particle size distribution, specific gravity, density, shear strength, permeability and vertical compression settlement, considering water content change and temperature effect of several waste materials. Bottom ash, which is lighter than soils, has similar permeability and particle size distribution to those of weathered soils. But permeability may differ depending on the particle size distribution. The shear strength aspect of bottom ash and tire shred mixed materials are similar to that of natural fill materials. In the 1-D vertical compression settlement test, we could be assured that bottom ash and tire shred mixed materials showed similar compression settlement to that of sand under actual vertical stress. Furthermore, materials including bottom ash showed smaller compression settlement than that of weathered soils in the long-term settlement test under wetting and freezing-thawing condition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.12 s.243
• /
• pp.1299-1306
• /
• 2005

The suitable pressure regulator modeling at each opening ratio and pressure ratio is very important to obtain reliable results, especially in small scale pipeline network analysis such as a pressure regulator system. And it is needed to confirm both whether temperature recovery is achieved after passing by the pressure regulator's narrow neck and how much amount of low temperature area that can cause condensate accumulation is distributed by various PCV models and driving conditions. In this research, the numerical model resembling P company pressure regulator that is used widely for high pressure range in commercial, is adopted as the base model of CFD analysis to investigate pressure regulator's flow characteristics at each pressure ratio and opening ratio. And it is also introduced to examine pressure regulator's critical flow characteristics and possibility of condensation or freezing at each pressure ratio and opening ratio. Additionally, the comparison between the results of CFD analysis and the results of analytic solution obtained by compressible fluid-dynamics theory is attempted to validate the results of CFD modeling in this study and to estimate the accuracy of theoretical approach at each pressure ratio and opening ratio too.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.93-103
• /
• 2011

In order to design suitable geo-structures in cold region, it is generally required to consider the mechanical properties of permafrost soils. 'Frost heave' as one of the primary phenomenon is considered to be an important factor together with 'adfreeze bond-strength' and 'creep deformation' for structural design process in permafrost area. Therefore, the fundamental study for frost heave has to be preceded for design of geo-structures in cold region. While various experimental apparatuses have been developed, there still exist a certain level of limitation to evaluate the frost-heave characteristics as design parameters. In this paper, a new type of experimental apparatus is proposed to evaluate the engineering characteristics of frost heave in permafrost soils and a set of verification test results is presented. Based on the verification tests, the proposed apparatus is a suitable to obtain frost characteristics of soils.

• Korean Journal of Materials Research
• /
• v.21 no.9
• /
• pp.520-524
• /
• 2011

Porous W with controlled pore characteristics was fabricated by a freeze-drying process. $WO_3$ powder and camphene were used as the source materials of W and sublimable vehicles, respectively. Camphene slurries with $WO_3$ contents of 10 and 15 vol% were prepared by milling at $50^{\circ}C$ with a small amount of oligomeric polyester dispersant. Freezing of a slurry was done in a Teflon cylinder attached to a copper bottom plate cooled at $-25^{\circ}C$ while the growth direction of the camphene was unidirectionally controlled. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $800^{\circ}C$ for 30 min and sintered in a furnace at $900^{\circ}C$ for 1 h under a hydrogen atmosphere. Microstructural observation revealed that all of the sintered samples were composed of only W phase and showed large pores which were aligned parallel to the camphene growth direction. The porosity and pore size increased with increasing camphene content. The difference in the pore characteristics depending on the slurry concentration may be explained by the degree of powder rearrangement in the slurry. The results strongly suggest that a porous metal with the required pore characteristics can be successfully fabricated by a freeze-drying process using metal oxide powders.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.524-528
• /
• 2005

The purpose of this study is to investigate the quality characteristic of cholesterol free milk helping the reduction of serum cholesterol. Cholesterol free milk stored at $10\pm1^{\circ}C$ was evaluated with general analysis, stability, cholesterol, microorganism, aflatoxin $M_1$, antibiotic, antibacterial agent, color, and sensory evaluation. Animal fat contents were significant (p<0.05), but normal values. Quality characteristics of alcohol test, freezing point, and somatic cell count were general milk data with stability. Cholesterol content, microorganism, and aflatoxin MI were not detected. Also antibiotic and antibacterial agent residues were not detected by Parallux, Charm II, TTC II, and Eclipse method. Color of CFM1 was significant, while CFM2 was similar with conventional milk. Compared to control milk made by conventional way, QDA scores of color and mouthfeel in CFM1 were significantly different, whereas CFM2 did not show any significant. These Quality characteristic results suggested that health-oriented cholesterol free milk would be made by food additive.

• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.453-459
• /
• 2012

In this study, Song-Cheon river Basin located at Dae-kwan-lyong Meyn in Kang-Won Province was monitored to analyze characteristics of non-point source pollution during the snowmelt period. The characteristics of NPS pollution such as runoff, change in water quality and pollutant loads by snowmelt were investigated from 23th February 2010 to 27th April 2010. The results showed that The climate change effects flow, turbidity and concentration of SS and COD with showing similar trend of fluctuation. Daily pollutant loads per unit area were SS 74.43 kg/ha/day, COD 1.25 kg/ha/day, BOD 0.21 kg/ha/day, TN 0.717 kg/ha/day, TP 0.141 kg/ha/day and the flow weight mean concentration has been SS 985.97 mg/L, COD 16.28 mg/L, BOD 2.67 mg/L, TN 9.302 mg/L, TP 1.834 mg/L, respectively. The flow and pollutant loads both of SS and of COD significantly increased during the snowmelt period. Because structurally loosen soil by freezing and thawing deteriorates water quality, research and management measures will be needed.

• Reproductive and Developmental Biology
• /
• v.28 no.4
• /
• pp.261-265
• /
• 2004

The present study was conducted to assess sperm characteristics in miniature-pig. The semen samples were transported to the laboratory at 17℃ within 3 hours after collection. The extended semen was stored at 17℃, and sperm quality was evaluated at 0, 1, 3, 5 and 7 days after storage. The semen volume of miniature-pig (62±22㎖) was significantly (p<0.05) lower than that of Duroc (155±25㎖) and Yorkshire (154±23㎖). Significant differences were also observed in sperm concentrations. During 3 days of storage, sperm viability did not differ among miniature-pig, Duroc and Yorkshire. However, the viability was significantly (p<0.05) lower in miniature-pig than in Duroc and Yorkshire semen after Day 3 of storage. In abnormality, acrosome intactness and intensity, there were no differences among miniature-pig, Duroc and Yorkshire semen. On the other hand, the viability of frozen-thawed sperm in miniature-pig was significantly (p<0.05) lower than in that of Duroc and Yorkshire. This study also examined CTC patterns in frozen-thawed spermatozoa. The rates of AR pattern were higher in miniature-pig than in Duroc and Yorkshire. However, no difference was found in F, B and AR patterns. The results of present study suggest that further research is necessary to develop of semen extender and freezing methods to improve sperm quality in miniature-pig.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.1
• /
• pp.113-119
• /
• 2006

The physicochemical properties and sensory characteristics for the neck, belly and ham of crossbred pigs SW90 (slaughter weight $90\sim100\;kg$) and SW110(slaughter weight $110\sim120\;kg$) were evaluated to investigate their quality. The water holding capacity, freezing loss, thawing loss, pan boiling loss and water boiling loss were not significantly different between SW90 and SW110, but the thawing loss and water boiling loss of belly were higher than those of other parts(p<0.05). The surface color was not affect by slaughter weight, but the L* value of belly was higher than that of the other parts and a* value was lower than that of the neck and ham(p<0.05). The mechanical texture was not affect by slaughter weight, the hardness of belly was lower than that of the neck and ham, but the springiness, cohesiveness, gumminess, chewiness and shear force of neck and ham were lower than those of belly(p<0.05). The pH, VBN content and TBARS value was not significantly different by slaughter weight. The taste, aroma, texture, juiciness and palatability of SW110 were higher than those of SW90, and the sensory characteristics of belly were higher than those of neck and ham, but their difference was not significant.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.23-28
• /
• 2007

This study aims to find out cooling characteristics of TMA(Tri-Methyl-Amine, $(CH_3)_3N$) 25wt%-water clathrate compound with ethanol($CH_3CH_2OH$) such as supercooling, phase change temperature and specific heat. For this purpose, ethanol is added as per weight concentration and cooling experiment is performed at $-6{\sim}-8^{\circ}C$, cooling heat source temperature, and it leads the following result. (1) Phase change temperature is decreased due to freezing point depression phenomenon. Especially, it is minimized as $3.8^{\circ}C$ according to cooling source temperature in case that 0.5wt% of ethanol is added. (2) If 0.5wt% of ethanol is added, average supercooling degree is $0.9^{\circ}C$ and minimum supercooling is 0.8, $0.7^{\circ}C$ according to cooling heat source temperature. The restraint effect of supercooling is shown. (3) Specific heat shows tendency to decrease if ethanol is added. It is $3.013{\sim}3.048\;kcal/kg^{\circ}C$ according to cooling heat source temperature if 0.5wt% of ethanol is added. Phase change temperature higher than that of water and inhibitory effect against supercooling can be confirmed through experimental study on cooling characteristics of TMA 25wt%-water clathrate compound by adding additive, ethanol. This can lead to shorten refrigerator operation time of low temperature latent heat storage system and improve COP of refrigerator and efficiency of overall system. Therefore energy can be saved and efficiency can be improved much more.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.263-271
• /
• 2006

The purpose of this study was undertaken to compare ability of frozen-thawed sperm characteristics between two strains (miniature pig and Duroc). The semen was collected by gloved-hand method into a pre-warmed ($37^{\circ}C$) thermos bottle. The semen was diluted with same volume extender and added to LEY solution for freezing. The diluted semen was placed in 0.5 ml straws, and freezing was initiated by exposing the straws to liquid nitrogen ($LN_2$) vapours for 10 min before placing them into $LN_2$ for cryopreservation. The frozen-semen straw were thawed at 20, 37 and $50^{\circ}C$ for 1 min, 45 sec and 10 sec within water-bath. The semen sample were evaluated at 0, 3, 6, 9, and 12 h after incubation at $37^{\circ}C$ for analysis of sperm ability. Abnormality of spermatozoa in miniature pig was significantly (p<0.05) higher than that in Duroc at 0, 9 and 12 h of post-thawing incubation after frozen-thawing. The percentage of F-patterned spermatozoa in miniature pig was significantly (p<0.05) lower, while the percentage of AR (acrosome reacted spermatozoa) pattern was higher in the miniature than in the Duroc. On the other hand, there was no significant difference in the viability of spermatozoa thawed at different temperature ($20^{\circ}C\;and\;37^{\circ}C$) between two species, but the viability in miniature pig was higher (p<0.05) than in Duroc when sperm was thawed at $50^{\circ}C$. In conclusion, this study suggest that suitable freezing method for miniature pig semen is required for increasing post-thawing viability and fertilization capacity.