• Reproductive and Developmental Biology
• /
• 제28권3호
• /
• pp.155-159
• /
• 2004

This study was carried out to investigate the general characteristics and viability of sperm after freezing and thawing and the pregnancy rates after artificial insemination with thawed semen. The rates of viable sperm after slow and rapid freezing were 87.4±3.85% and 70.8±4.45%, respectively which were significantly lower than that of fresh semen control (91.7±3.45%). The mean concentration of epididymal sperm after dilution in 1.0 ml saline and. 3.0 ml extender in a various concentrations of cryoprotectants was 124.5±48.3 x 10/sup 6/ (range of 45 x 10/sup 6/ to 280 X 10/sup 6/ /ml). There was a significant difference not in the percentage of acrosome-reacted sperm, but in the percentage of capacitated sperm, between fresh and frozen-thawed epididymal semen. When frozen-thawed after diluting with tris-buffer extender containing glycerol, DMSO and ethylene glycol with concentration of 2 to 6%, the rates of epididymal sperm exposed to different cryoprotectants ranged from 14.4±4.7% to 20.7±5.8%, 17.8±5.2% to 36.5±4.9%, and 14.4±4.6% to 18.5±5.3%, respectively which were lower compare to fresh semen control. The pregnancy rate after artificial insemination with frozen semen was 70.6%, whereas that with fresh semen was 90.0% in dogs with naturally induced estrus.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.116-121
• /
• 2005

폐수 처리를 위한 PVA 포괄 고정화 담체의 특성에 관한 연구를 실시하였다. 특히 PVA의 고정화 조건에 따른 용해도의 영향, 첨가제가 PVA 물성에 미치는 영향, 제작된 PVA gel의 질산화 처리 효율을 살펴보았다. PVA gel 제작 과정 중 진공을 걸어줄수록 그리고 동결온도가 낮을수록 PVA gel의 용해도는 감소하였다. PAC와 같은 첨가제를 넣었을 때 PVA gel의 용해도는 감소하였고 특히 organoclay를 넣었을 때 PAC에 비하여 25% 낮은 용해도를 보였다. 질산화 효율면에서는 PVA로 코팅한 담체가 기존의 부착 담체에 비하여 용질과 산소 확산의 제한 때문에 질산화율이 낮게 관찰되었다.

• 한국도로학회논문집
• /
• 제11권3호
• /
• pp.75-83
• /
• 2009

안정처리된 도로 지반재료는 현장에서 환경적인 요인으로 인하여 내구성능은 여전히 구조적인 성능과 더불어 평가가 요구되고 있다. 이에 본 논문에서는 국내에서 대표적으로 활용하고 있는 기층과 노상재료를 활용하여 다양한 안정제 종류와 함유량을 달리하여 공시체를 제작하였고 동결-융해 및 습윤-건조하여 여러 조건의 반복재하 회복탄성계수시험을 실시하여 내구성능 및 특성을 파악하였다. 또한 결과에 기초하여 안정처리된 지반재료에 대한 회복탄성계수 예측모델을 살펴보고 모델계수의 범위를 평가후 문헌의 자료와 비교하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2016

We developed eco-friendly lightweight concrete in order to apply eco-friendly lightweight concrete into structural wall or slab of shallow depth urban railway system. However, since lightweight aggregate has different structural feature of porous and it has been overvalued at current KS standard when applied, we did compare the characteristics of freezing and thawing of normal weight aggregate concrete by comparative test method(KS, ASTM). According to test method, there was a big difference of dynamic elastic modulus in lightweight concrete rather than in normal weight aggregate concrete. The big absorption factor in lightweight aggregate is main reason for that. For more detail, in KS law in which only 14 days water curing is carried out, the big amount of moisture in lightweight aggregate is frozen and high heaving pressure occurs and finally that lead to destruction of lightweight concrete. Therefore, it is considered that in case of lightweight concrete, resistibility against freezing and thawing has been undervalued in domestic KS law compared to ASTM law, which is overseas standard. So, a variety of examination about testing criteria and rule would be necessary for exact assessment of lightweight concrete.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.193-197
• /
• 2020

Porous Cu-14 wt% Co with aligned pores is produced by a freeze drying and sintering process. Unidirectional freezing of camphene slurry with CuO-Co₃O₄ powders is conducted, and pores in the frozen specimens are generated by sublimation of the camphene crystals. The dried bodies are hydrogen-reduced at 500℃ and sintered at 800℃ for 1 h. The reduction behavior of the CuO-Co₃O₄ powder mixture is analyzed using a temperature-programmed reduction method in an Ar-10% H₂ atmosphere. The sintered bodies show large and aligned parallel pores in the camphene growth direction. In addition, small pores are distributed around the internal walls of the large pores. The size and fraction of the pores decrease as the amount of solid powder added to the slurry increases. The change in pore characteristics according to the amount of the mixed powder is interpreted to be due to the rearrangement and accumulation behavior of the solid particles in the freezing process of the slurry.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1549-1554
• /
• 2008

In this paper, The evaluation of durability of the PC Panel lining for tunnel structure was examined through the rapid test by carbonation and freezing and thawing. Also for the purpose of improvement of durability. Namely, the durable characteristics of PC Panel lining by carbonation and freezing and thawing, was evaluated by rapid test and long-term field exposure test and main influence factors were derived. As a result of test, Correlation of accelerating test in deterioration chamber and long-term field exposure test, it will be expected that the proposed correlation well to the prediction of life expectancy of structure and is contributed greatly in the future.

• 태양에너지
• /
• 제20권3호
• /
• pp.11-19
• /
• 2000

In this study, the basic data which were required for development of LHSS(latent heat storage system) were experimentally obtained. Experiments were carried out under the following conditions. The initial temperatures of P.C.M. which were used by parameter is $5^{\circ}C,\;9^{\circ}C$ and $14^{\circ}C$. The conditions of working fluid are $-6^{\circ}C,\;-4^{\circ}C$, and $65{\ell}$/min.. The pure water of which the freezing point is $0^{\circ}C$ was filled in the system, and the Ethylene glycol(brine) was circulated through the 10 vertical tubes as a secondary fluid in order to cool the P.C.M. down. The inlet temperature of the secondary fluid and the initial temperature of the water were varied to investigate the effects of the important design parameters. The phenomenons of temperature conversion of P.C.M. were appeared for the conductive heat transfer and free convective heat transfer by buoyancy force in this storage unit system. In order to find the effective water circulation path, we obtained P.CM. temperature distributions of 5 parts in the storage tank during freezing process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.577-580
• /
• 2006

This paper presents the experimental results of frost durability characteristics including freezing-thawing and de-icing salt scaling of the concrete used for gutter of the road. Mixtures were proportioned with the three level of water-binder ratio (W/B), 0.58, 0.53, and 0.48, and two binder compositions corresponding to Type I cement without any supplementary cementitious materials (OPC) and Type I cement with 30% blast-furnace slag replacement (Slag30). Also, two different solutions of calcium chloride and water that contains 0 and 8g of anhydrous calcium chloride in each 100 mL of solution, respectively, were used to evaluate their effect on the frost durability resistance. Test results showed that the Slag30 mixture exhibited higher durability factor and lower mass loss values than those made with OPC. Among the mixture tested in this work, the mixtures (OPC and Slag30) made with a relatively higher W/B of 0.58 exhibited large amount of the de-icing salt scaling regardless of calcium chloride concentration. Finally, the use of slag can be used effectively in terms of economy and frost durability of the concrete designated for gutter.

• Animal Bioscience
• /
• 제35권3호
• /
• pp.494-502
• /
• 2022

Objective: The objective of this study was to evaluate functional properties of reduced-salt pork meat products made of pre-rigor pork loin treated by different freezing temperatures (-30℃ and -70℃) during storage. Methods: Pre-rigor cured pork loin with 1.0% added salt was compared to post-rigor muscle added with 1.5% salt for pH, color (L^*, a^*, b^*), cooking loss (CL), expressible moisture, warner-Bratzler shear value, thiobarbituric acid reactive substances (TBARS), and volatile basic nitrogen (VBN). Results: Pre-rigor cured pork loins had higher pH and temperature than post-rigor ones as raw meat (p<0.05). pH values were higher for pre-rigor pork loins than those of post-rigor pork loins (p<0.05). Color values did not different among treatments (p>0.05). No color differences were observed during storage period after cooking (p>0.05). The CL (%) of pre-rigor cured pork loins was the lowest when frozen at -70℃. The TBARS and VBN increased from 8 weeks of storage (p<0.05), but no further changed thereafter (p>0.05). Pre-rigor cured pork loins added with 1.0% salt showed similar characteristics to post-rigor pork loins added with 1.5% salt. Conclusion: Cured pork loins could be produced using pre-rigor muscle added with 1/3 of the original salt level (1.5%) and could be stored for up to 4 wks of frozen storage, regardless of a frozen temperature of -30℃ or -70℃ without detrimental effects.

• 한국가축번식학회지
• /
• 제26권3호
• /
• pp.253-261
• /
• 2002

본 연구는 진도개 동결정액 제조기술을 정립하기 위하여 진도개 정액성상과 동결 전후 정액의 활력과 생존율 및 CASAs를 이용한 운동성 등에 대하여 조사하였고, 백구와 황구간, 개체간의 정액성상과 내동성을 비교, 조사하였다. 이상의 연구결과는 다음과 같다. 1. 총 63회 정액채취 후 신선정액의 평균 정액량 3.8 $m\ell$, 농도 145.6$\times$$10^{6}$$m\ell$, 총정자수 396.2$\times$08/$m\ell$, 전진운동율 79.7% 및 생존율 89.5% 였다. 황구와 백구간에는 황구가, 개체간에는 황구 2호가 정자농도, 총정자수, 전진운동정자율 및 생존율 등의 정액성상에서 유의적으로 우수하였다(P<0.05). 2. 동결전.후 정자의 전진운동율과 생존율을 46회 조사한 결과 동결전 73.5%와 82.3%를, 동결후 51.1%와 64.9%를 나타내 동결과정이 전진운동율과 생존율에 영향이 있었으며, 역시 황구와 백구간에는 황구가, 개체간에는 황구 2호가 동결전후 전진운동율과 생존율에서 유의적인 차이가 인정되었다 (P<0.05). 3. 동결.융해정자의 보다 객관적인 평가를 위하여 CASA system을 이용한 총 44회 평가한 결과, 생존율 65.6%, 전진운동율 54.8%, VAP 75.3 $\mu\textrm{m}$/sec, VCL 90.0 $\mu\textrm{m}$/sec, VSL 69.4 $\mu\textrm{m}$/sec 및 ALH 4.4 $\mu\textrm{m}$로 동결 융해 정액의 운동성은 양호하였고, 황구와 백구간의 운동성에는 유의적인 차이가 없었으나, 개체간에는 역시 황구 2호가 운동성이 우수하여 유의적인 차이가 인정되었다 (P<0.05). 4. 채취된 정액중 백구는 46%(13/28), 황구는 94%(33/35)가 동결정액 제조가 가능해 황구가 내동성이 좋았으며, 전체적으로 73%(46/63) 동결정액 제조가 가능하였다. 결론적으로 진도개의 동결정액을 제조하기 위하여 정액성상 및 동결 전후 운동성을 조사한 결과 동결정액 제조와 생산체계의 구축이 가능하였으며, 황구와 백구간, 개체간의 정액성상과 동결전후의 운동성에 차이가 인정되므로 정액성상과 내동성을 고려한 종견선발 체계가 필요하다고 사려되었다.