• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.127-134
• /
• 2016

PURPOSES : Visibility of lanes on the road improves as retro-reflectivity rises. This helps reduce traffic accidents at nighttime or in bad weather. This study aimed to evaluate the effects of improved visibility on reduction of traffic accidents when the color of the lane in the median of the highway was changed from yellow to white. METHODS : In order to evaluate the accident reduction effect of the white left shoulder line, Hauer (1997)'s Comparison-Group method was chosen as an analysis methodology. The JungBu-2 highway, which is equipped with the white left shoulder line and is in trial operation, was chosen as a target for analysis. Data of accidents for 10 months before and after installation was collected and analyzed. In addition to the number of accidents, the types of accidents were classified into nighttime accidents, accidents in bad weather, and median collisions. The accident reduction effect of improved visibility of lanes was analyzed. RESULTS : The analysis' finding showed that installation of the white left shoulder line decreased the number of accidents by 28%. Moreover, improvement in visibility was effective in reducing nighttime accidents by 67.63%, accidents in bad weather by 55.19%, and median collisions by 48.55%. CONCLUSIONS : Based on the analysis' results in this study, it was concluded that white left shoulder line on the freeway contributed to reduce traffic accidents, especially nighttime accidents, accidents in bad weather, and median collisions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.49-56
• /
• 2021

The purpose of this study is to develop a methodology to select a cluster of night traffic accidents using CRP (Continuous Risk Profile) analysis. the other purpose of this study is to present the characteristics of the traffic accident cluster section selected at night using CRP analysis. The CRP analysis was performed considering traffic volume of target routes through traffic accident data. In addition, variables were set according to the freeway sections. the method of subtracting the daytime CRP from the nighttime CRP was used to analyze the nighttime traffic accident. As a result, Using the CRP analysis, the sections of hotspot were identified and plotted based on traffic accidents. Also, the sections where traffic accidents are frequent were those where IC or Tunnels were installed, and there was a deviation from the general section. In conclusion, CRP analysis could be used to calculate the frequent section of specialized traffic accidents at night, and it was selected as a point in need of improvement due to the frequent occurrence of specialized traffic accidents at night in the section where IC or tunnel facilities are installed. In addition, it is inferred that the number of specialized traffic accidents at night in the section where IC or tunnel facilities are installed is a factor in the problem of night visibility due to lighting facilities.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.211-219
• /
• 2005

A selection of the analysis section for traffic accidents is used to analyze definitely the cause of accidents sorting similar accidents by a group and to raise the effect of improvement projects deciding the priority of accidents. In the existing method, an uniformly dividing method based on road mileages has been used, which has no consideration for similarities among accidents. Consequently, in recent, a slider-length method considering accident types rather than road mileages is widely used. In this study, using K-mean method, a non-hierarchical grouping technique used in the Cluster Analysis ai a applicatory method for the slider length method, a method classifies accidents that occurred the most nearby mileages into one group is proposed. To verify the proposed method, a comparison between the f-mean method and the dividing method at regular intervals on the data of a total of 25.6km lengths along Kyung-bu freeway in Pusan direction was made so that the K-mean method was proved to an effective method considering the similarities and adjacencies of accidents.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.91-102
• /
• 1999

The objective of this study is to evaluate traffic management strategies using Variable Message Signs(MCS) on urban freeways. It is well known that real-time information on traffic conditions increases driver's comfort, and reduces the risks of accidents if drivers are aware of the traffic situation in advance, they decide whether to divert from the freeway or continue on the planned route. The experimental data collected on the Olympic highway we have shown the following results : 1. when the information on both the congested freeway and uncontested diversion route is displayed on the variable message sign. an additional 1.7 percent of traffic diverted, which results in a 3.7 percent reduction in total travel time. 2 Compared with one Proposed VMS message of 'reduce the speed', the other Proposed VMS message of 'keep speed 70km/h' is found to be much more effective in reducing mean speed.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.67-74
• /
• 1999

Where an interchange is located just after a tunnel not only it is impossible to install the traffic signs in tunnel sections but also sufficient sight distance to identify the interchange can't be provided. The objective of this study is to suggest the safety based spacing between tunnel and interchange. For this study accident rate was used as an index representing characteristics for vehicle operation to suggest the appropriate spacing. Traffic volume and the number of accidents on freeway from 1992 to 1997 were analyzed. The relationship between accident rate and spacing represents negative logarithm function such that shorter spacing increases accident rate. An appropriate safety based spacing between tunnel and interchange for four lane freeway with the design speed of 100kph was found as 2.6km.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.289-294
• /
• 2010

It is well known that rumble strips contribute to reduce traffic accidents. The present paper provides the reduction effect of traffic accidents under specific highway geometrics after rumble strip installation. Traffic accidents on freeway sections before and after rumble strip installation are compared when conditions of the highway geometric characteristics such as horizontal, vertical geometrics are given. It is shown that rumble strips are effective under highway geometric conditions of down slopes or right curvatures. It is also shown that rumble strips are still effective with shorter length of installation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.627-635
• /
• 2014

Currently the highest speed limit on the road traffic congestion or because you can not cope with climate change to cause a traffic accident may be a factor. According to the Road Traffic Act as well as 20% to 50% in case of inclement weather, but the driver must slow speed left to the judgment of the difficulties, and to slow the vehicle and the relative velocity between the vehicle does not run longer be a big influence on the environment and safety. Thus, variable speed control for drivers on the road, specify the appropriate maximum speed limit in bad weather It keeps motorists slowed the run rate to prevent accidents or reduce the severity of accident damage is expected to be possible. The purpose of this study is the frequent traffic accidents Continuous Busan (City Freeway) around the variable speed control in the appropriate sections so that it can be done by analyzing the characteristics of traffic accidents were the severity of the accident. Highway and urban environment, the geometry of the structure because it has a lot of Curved planar point compared to wet and dry road surfaces by simulated rain wet had bom the more the speed the greater the risk of an accident was the result. Based on these results, the primary section, first urban highway tunnel, near the lamp, near Toll Plaza, near binary Outlet after considering various factors such as speed reduction is needed in the first period by conducting awareness and recognize the need for the participation of the driver and the future city installation and operation of highways in all sectors is expected to be expanded.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.123-135
• /
• 2007

The objective of this study is to analyze the relationship between traffic accidents occurring at trumpet interchange ramps according to accident type as well as the relevant factors that led to the traffic accidents, such as geometric design elements and traffic volumes. In the process of analysis of the distribution of traffic accidents, negative binomial distribution was selected as the most appropriate model. Negative binomial regression models were developed for total trumpet interchange ramps, direct ramps, loop ramps and semi-direct ramps based on the negative binomial distribution. Based upon several statistical diagnostics of the difference between observed accidents and predicted accidents with four previously developed models, the fit proved to be reasonable. Understanding of statistically significant variables in the developed model will enable designers to increase efficiency in terms of road operations and the development of traffic accident prevention policies in accordance with road design features.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.73-81
• /
• 2014

This study dealt with the impacts of geometric structure on traffic accidents occurring on the interstates. There are standard values for the case of geometric structure which are recommended in the design guideline/policy; however, in the previous models, geometric variables were adapted as integrated ones as opposed to mixed ones in the real world so that derived models had a weakness to reflect the real. Therefore, using subdivided geometric variables, this study tried to derive the model which reflects the real world. In addition, by calculating elasticity, each variables' effect to the accidents are estimated. Hopefully, this study will help to establish the future guideline/policy of geometrics considering traffic safety.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.41-51
• /
• 2006

In this paper, a fundamental study on the characteristics of traffic accidents according to the alignment and traffic conditions on the ramp of freeway is addressed. The macro-and-micro scope analysis of characteristics about traffic accidents on the trumpet-IC ramps is conducted depending on the entering and exit ramp types under the various conditions of traffic volume and alignment And it is turned out that the conditions of alignment. such as radius, differences of curvatures, and main road grade, and traffic volume relate to the ramp accidents of trumpet IC according to ramp types, such as direction, semi-direction, and loop. Macroscopically, AR (Accident Rate) according to trumpet IC types, A and B, is analyzed nearly equal, but Number of accidents occurred in IC type B shows about 1.5 times higher than type A. And AR of exit ramps shows three times more than entrance ramps. Microscopically, ARs for each exit-ramp type, according to the increment of traffic volume, the difference of curvatures. and the first radius, exponentially decrease respectively. But relationships between AR and the second radius or exit ramp shows inverted U-shaped. AR according to main-road grade Peaks between -1.5% and -0.5%. It is expected that the developed models not only are employed to make design of trumpet-IC ramp more cost-efficiently and safely, but also contribute to making alternatives to the reduction of traffic accidents on trumpet IC ramps under the conditions of high traffic accident rate.