• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.357-364
• /
• 2012

For the resistance of the closed intellectual property license from the Free Software Movement. It's free and also can adapt have been widely used. Software for the resistance of the closed intellectual property rights have been promoted by the free software movement. Implementation of the proposed changes in the license that anyone can freely use the software and adapt open source software is widely used. The product of open source software can reduce development time and cost. Many people who use it will improve, verification and developed. However, indiscriminate use of these advantages, as well as the risk of dispute is high. This study is analyzed open source software dispute cases for piracy protection and will show duly open source software available to users by user environment.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.1
• /
• pp.43-50
• /
• 2017

Use-After-Free security problem is rapidly growing in popularity, especially for attacking web browser, operating system kernel, local software. This security weakness is difficult to detect by conventional methods. And if local system or software has this security weakness, it cause internal security problem. In this paper, we study ways to remove this security weakness in software development by summarize the cause of the Use-After-Free security weakness and suggest ways to remove them.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.452-459
• /
• 2015

Thanks to the development of applications, many people are using a smart phone cradle these days. But it has some problems. First of all, it is hard to fix on automobiles. Also, it is vulnerable to external vibration. Recognizing these problems, we decided to improve this device by using FreeCAD and ANSYS. Because FreeCAD is newly invented software, we used another 3D modeling software to cover shortages of tools in FreeCAD. Also, we used famous analysis software 'ANSYS' to analyze bending deformation, modal analysis, and harmonic analysis.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.4
• /
• pp.803-810
• /
• 2017

Recently, social security problems have been caused by the development of the software industry, and a variety of automation techniques have been used to verify software stability. In this paper, we propose a method of automatically detecting a use-after-free vulnerability on Windows system calls using dynamic symbolic execution, one of the software testing methods. First, a static analysis based pattern search is performed to select a target point. Based on the detected pattern points, we apply an induced path search technique that blocks branching to areas outside of interest. Through this, we overcome limitations of existing dynamic symbolic performance technology and verify whether vulnerability exists at actual target point. As a result of applying the proposed method to the Windows system call, it is confirmed that the use-after-free vulnerability, which had previously to be manually analyzed, can be detected by the proposed automation technique.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.466-477
• /
• 2021

There are three different well-known methods for predicting the manoeuvrability of ships: (1) free running model test, (2) direct manoeuvring simulation using CFD and (3) system-based manoeuvring simulation. In this paper, the manoeuvrability of the KVLCC2 was estimated using CFD with rigid body motion and body force propeller method. The free running manoeuvre at the different time steps were also simulated. The yaw checking ability and the turning ability of KVLCC2 were predicted using CFD and could have been confirmed that the IMO criteria was satisfied. When the results were compared with the model test and system-based method, the free running simulation showed better agreement to that of the model test. It could also be confirmed that the results vary depending on the time step. Overall, the CFD results using the body force propeller method estimated most accurately the test results.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.6-9
• /
• 2008

In future domestic context aware applications the location of mobile devices is often required. Ultrasonic technology enables high resolution indoor position measurements. A disadvantage of state-of-art ultrasonic systems is that several base stations are required to estimate 3D position. This study aims to evaluate the efficiency and effectiveness of using UPS as a 3D free-hand writing or drawing tool. The processes include the design and testing of UPS as an efficient 3D free-hand writing or drawing tool in the air. The paper will further explain the system architecture of the UPS and how to use GPS as 3D free-hand writing or drawing tool. The efficiency and effectiveness of the system was confirmed by a computer software simulation. The software will further display the result of drawing or writing from the user by graphics. As a result, it is possible to implement UPS as a 3D free-hand writing or drawing tool in the air.

• Coupled systems mechanics
• /
• v.12 no.5
• /
• pp.461-479
• /
• 2023

The paper deals with the finite element modelling of the free vibration and structural behavior of a particular four-floor reinforced concrete structure subjected to static equivalent seismic loads and supported by a shallow foundation system called SNSF (Spider Net System Footing). The two FE models are a simple 2D Matlab model and a detailed 3D model based on solid elastic elements using Altairworks (Hypermesh and Optistruct). Both models can simulate the soil structure interaction. We concentrate on the behavior of a representative cell involving two columns on five levels. The influence of the boundary conditions on the external vertical planes of the domain are duly studied. The Matlab model appears relevant for a primary estimation of frequencies and stiffness of the whole structure under vertical and lateral loads.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.451-454
• /
• 2006

Ultrasonic Positioning System (UPS) is an absolute positioning system using ultrasonic waves and has better performance in low price than the other absolute positioning systems. UPS can be further used as pseudo-satellites in the place where GPS is not available. This study aims to evaluate the efficiency and effectiveness of using UPS as a 3D free-hand writing or drawing tool. The process includes the design and testing of VPS as an efficient 3D free-hand writing or drawing tool in the air. The paper will further explain the system architecture of the UPS and how to use GPS as 3D free-hand writing or drawing tool. The efficiency and effectiveness of the system was confirmed by a computer software simulation. The software will further display the result of drawing or writing from the user by graphics. As a result, it is possible to implement UPS as a 3D free-hand writing or drawing tool in the air.

• International Journal of Computer Science & Network Security
• /
• v.21 no.7
• /
• pp.241-248
• /
• 2021

Open-source software developments are basically Internet-based communities that voluntarily collaborate in developing software on the Internet and such Internet communities have become an important cultural and economic phenomenon. As a result, the emergence of open-source software has presented a challenge to the traditional offerings by providing free alternatives. The objective of this article is to review the possibility of the adoption of open source software in the creation of digital libraries, highlights advantages and disadvantage preservations. Among our objective also explaining the request of such software at the present time and the criteria evaluated in the digital preservation through surveying the best open source software from the reality of intellectual production, and standards that are being built to evaluate and choose what software to create a digital library without other software available. To achieve the above objectives, we shed the light on the top 11 open-source software to manage Libraries in addition to standards that may represent the basic building block for the selection of the appropriate systems to the needs of the digital library. This article relied on the descriptive approach by reviewing a series of studies and scientific research works related to the subject of the current study. Accordingly, the most prominent of the findings of this work is its illustration of the close association between open source software and the library community, both of which represent free culture. Also it is shown that the selection process of open source software has some obstacles most notably as there are no clear and reliable criteria for selecting these systems. Current study has concluded a set of recommendations, notably awareness of the role and importance of open source software and the facilities it provides in managing digital content.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1832-1843
• /
• 1995

Tool interference is one of the most critical problems in sculptured surface machining. When machining cavities and concaves, the tool frequently overcuts the portions of the surface, which cause inaccuracy in machining. So tool interference-free paths must be generated for rough cutting more efficiently. In this paper a software using SSI(Surface/Surface intersection) algorithm is developed for eliminating tool interference which occurs in an offset surface in 3-dimensional free form surface modeling. this work consists of two stages : using the offset data, the intersection curves are rapidly checked by this algorithm at the first stage. CL(cutter location) data are obtained by deleting the loop section of intersected offset patches at the second stage. This algorithm can reduce the amount of memory required to store machining data and also easily check region which have the possibility of intersection. Also, This software is verified to be useful in machining a curved object on a DNC milling machine.