• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.963-968
• /
• 2013

In this study, we carried out a structural analysis for determining the stresses acting on the tempered glass of a freely falling cellular phone using ANSYS 13.0, commercial finite element code. We designed a phone heavier than any contemporary cellular phone and performed finite element analysis using the falling speed at a height of 104 cm, which is equal to of the average leg length of Koreans. By determining the maximum stress acting on the phone's tempered glass and frame, we identified the location of large deformation. Furthermore, we evaluated the maximum/minimum equivalent stress and deformation of the reinforced glass and frame as functions of time.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.151-159
• /
• 2012

The characteristics of an impact load and pressure were experimentally investigated. Drop tests were carried out using a modified Wigley with CB = 0.56. The vertical force, pressures, and vertical accelerations were measured. A 6-component load cell was used to measure the forces, piezo-electric sensors were used to capture the impact pressure, and strain-gauge type accelerometers were used to measure the vertical accelerations. A 50-kHz sampling rate was applied to capture the peak values. The repeatability of the measured data was confirmed and the basic characteristics of the impact load and pressure such as the linearity to the falling height were observed for all of the measurements. A simple formula was derived to extract the physical impact load from the measured force based on a simple mass-sensor-mass diagram, which was validated by comparing impact forces with existing data using the mathematical model of Faltinsen and Chezhian (2005). The effects of the elasticity of the model and change in acceleration during the water entry were investigated. It is interesting to observe that the impact loads occurred and reached peak values at the same time duration after water entry for all drop heights.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2489-2494
• /
• 2008

The two-dimensional circular cylinder freely falling in a channel has been simulated by using Immersed boundary - lattice Boltzmann method in order to analyze the characteristics of motion originated by the interaction between the fluid and the solid. The wide range of the solid/fluid density ratio has been considered to identify the effect of the solid/fluid density ratio on the motion characteristics such as the falling time, the terminal velocity and the trajectory in the vertical and horizontal directions. In addition, the effect of the gap between the cylinder and the wall on the motion of two-dimensional circular cylinder freely falling has been revealed by taking into account a various range of the gap size. The Reynolds number in terms of the terminal velocity is diminished as the cylinder becomes close to the wall at the initial dropping position, since the repulsive force induced between the cylinder and wall constrains the vertical motion. Quantitative information about the flow variables such as the pressure coefficient and vorticity on the cylinders is highlighted.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.233-243
• /
• 2019

In this paper, numerical and experimental studies are performed to investigate the liquid impact on a free falling wedge. In the numerical simulation, the structure is assumed to be rigid and the elastic response is ignored. The fully nonlinear coupling between wedge and water is considered by an auxiliary function method based on the Boundary Element Method (BEM). At the intersection of the wedge surface and liquid surface, two coincident nodes are used to decouple the boundary conditions. The Eulerian free surface conditions in the local coordinate system are adopted to update the deformed free surface. In the experiments, five pressure sensors are fixed on each side of the wedge which is released from an experimental installation. Steel and aluminum wedges that have different structural elasticity are used in the experiments to investigate the influence of structural elasticity on the impact force. Numerical results are compared with experimental data and they agree very well. The influence of fluid gravity, body mass, initial entry speed and deadrise angle on the impact pressure are further investigated.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.54-61
• /
• 2004

This paper deals with flow characteristics on the air entrainment and the energy dissipation in nappe flow over the stepped drop structure. Nappe flow occurred at low flow rates and for relatively large step height Dominant flow features include an air pocket, a free-falling nappe impact and a subsequent hydraulic jump on the downstream step. Air entrainment occurred from the step edge, through a free-falling nappe impact and a hydraulic jump. Most energy was dissipated by nappe impact and in the downstream hydraulic jump. It was related with the step height and the overflow depth, but not related with step slope. The stepped drop structure was found to be effcient for water treatment and energy dissipation associated with substantial air entrainment.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.713-725
• /
• 2004

The two-dimensional motion of a freely falling circular cylinder in an infinite fluid is investigated numerically using combined formulation. The effect of vortex shedding on the motion of a freely falling cylinder is clearly seen: as the streamwise velocity of the cylinder increases due to gravity, the periodic vortex shedding induces a periodic motion of the cylinder. This motion in turn affects the flow field, which is manifested by the generation of the angular velocity vector of the cylinder parallel to the cross product of the gravitational acceleration vector and the transverse velocity vector of the cylinder. A correlation of St-Re relationship for a freely falling circular cylinder is drawn from the present results. The Strouhal number for a freely falling circular cylinder is found to be smaller than that for a fixed circular cylinder when the two Reynolds numbers based on the streamwise terminal velocity of a freely failing circular cylinder and the free stream velocity of a fixed one are the same. From "thought experiments", it is shown that the transverse motion of the cylinder plays a crucial role in reducing the Strouhal number and has an effect of reducing the Reynolds number from the viewpoint of the pressure coefficient. The mechanism of this reduction in the Strouhal number is revealed by the fact that the freely falling cylinder experiences a smaller lift force than the fixed one due to the transverse motion resulting in the retardation of the vortex shedding.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.181-186
• /
• 2012

Telematics services include automatic location tracking for emergency rescue, which is available for use in case of a car accident due to falling off roadways. This paper presents a simulation study on how far a car will fall before it hits the ground if it drops off of a roadway due to an accident or a natural disaster. The greatest horizontal distance the falling car can travel is presented in this paper, based on the assumption that air resistance as well as the direction and degree of acceleration due to gravity is negligible. This paper also presents the depth of the dent caused by the car sinking into the ground, the time it took for the car to fall free, and the velocity at which it travelled and horizontal distance it traveled. In this paper, the damage done to cars that crash into the ground and the dangers thereof are graphically represented.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.90-93
• /
• 2006

• 한국식품과학회지
• /
• 제14권4호
• /
• pp.342-349
• /
• 1982

송풍식건조과정(送風式乾燥過程) 중의 말쥐치육의 건조기구(乾操機構)와 수분활성(水分活性)과의 관계를 검토하기 위하여 $47.5^{\circ}C$에서 풍속과 공기의 상대습도를 달리하여 실험한 결과를 요약하면 다음과 같다. 전체 건조과정은 정속건조기(定速乾燥期)와 감속건조기(減速乾燥期)로 구분되었다. 정속건조기(定速乾燥期)는 건조표면(乾燥表面)이 수분활성(水分活性) 1.0을 유지하는한 계속되었으며, 온도와 상대습도가 일정할 때 정속건조속도(定速乾燥速度)는 공기의 속도(速度)의 제곱근에 비례하였다. 감속건조기(減速乾燥期)는 건조기구(乾操機構)가 서로 다른 제(第)1 및 제(第)2감속건조기(減速乾燥期)로 구분되었다. 제(第)1감속건조기(減速乾燥期)는 모세관 응축수의 건조표면(乾燥表面)으로의 이동이 불충분한 불포화표면건조기(不飽和表面乾燥期)였으며, 이 때의 건조속도(乾燥速度)는 공기의 온도가 일정할 때 상대습도에 크게 좌우되었다. 제(第)1감속건조기(減速乾燥期)와 제(第)2감속건조기(減速乾燥期)의 변환점에서 표면경화현상(表面硬化現象)이 시작되었다. 상대습도의 변화에 따라 제(第)2감속건조기(減速乾燥期)가 시작될 때의 수분활성(水分活性)과 수분함량(水分含量)은 각각 다른 값을 나타내었다. 제(第)2감속건조기(減速乾燥期)는 다시 건조기구(乾操機構)를 달리하는 두 개의 건조기(乾燥期)로 구분되었다. 제(第)2감속건조기(減速乾燥期)의 1단계는 말쥐치육 내부의 모세관 응축수가 건조표면(乾燥表面)으로 확산, 증발하여 건조가 진행되었으며, 이때의 수분의 확산계수는 $47.5^{\circ}C$에서 $2.89{\cdot}10^{-10}m^2/sec$였다. 표면경화현상(表面硬化現象)은 말쥐치육의 수분활성(水分活性)이 0.7에 이를때까지 계속되었다. 제(第)2감속건조기(減速乾燥期)의 2단계는 수분활성(水分活性) 0.45에서 시작되었다. 이 때의 건조는 말쥐치육 내부에 다분자층(多分子層)으로 흡착(吸着)한 결합수의 건조표면(乾燥表面)으로의 확산, 증발에 의하여 진행되었다. 흡착수분(吸着水分)의 분자층(分子層)의 수는 4였으며, $47.5^{\circ}C$에서의 확산계수는 $4.38{\cdot}10^{-11}m^2/sec$였다.

• 대한화학회지
• /
• 제37권12호
• /
• pp.1003-1009
• /
• 1993

여러 온도와 압력에서 벤젠의 점성도를 결정하여, 액체 벤젠의 점성도에 미치는 온도와 압력의 영향에 대하여 연구하였다. 여러 온도와 압력으로 유지되고 있는 일정한 밀도의 벤젠 속에서 공 낙하 시간을 측정함으로써 벤젠의 점성도를 산출할 수 있었다. 그 결과로부터 벤젠의 비부피에 미치는 온도와 압력의 영향, 자유부피에 미치는 온도와 압력의 영향에 대해서 알아보았으며, 결론적으로 벤젠의 점성도에 대한 온도와 압력의 영향을 온도와 압력의 변화에 따르는 자유부피의 변화에 의하여 고찰하였다.